Re: [PATCH v2 1/3] dt-bindings: media: i2c: dw9800: Redocument DW9800K

[Griffin Kroah-Hartman <griffin.kroah@fairphone.com>]

On 9/16/26 11:06, Krzysztof Kozlowski wrote:
> On Mon, Sep 14, 2026 at 12:25:56PM +0200, Griffin Kroah-Hartman wrote:
>> The DW9800K's properties are too different to justify sharing the same
>> bindings file as the dw9719, Create a separate bindings documentation
>> for the Dongwoon Anatech DW9800K with it's updated properties.
>>
>> More specifically:
>>
>> The DW9800K did not share the SAC1 and SAC6 modes
>> that the DW9719 used.
>>
>> The DW9800K does not actually have a register that matches the property
>> description of vcm-prescale, instead the description of the clock-presc
>> in the DW9768 is much more applicable to the functionality required
>> according to the DW9800K datasheet.
> 
> I don't get why it does not match. You have exactly the same first part
> of the description, look:
> 
There is no inherent difference between the two property names, the 
values that the previous binding was using was completely incorrect with 
the hardware.

The reason for this discrepancy in the first place was us guessing which 
properties that this driver would need based on the datasheets we had 
for older dongwoon devices.

> dw9719:
>    Indication of VCM switching frequency dividing rate select
> 
> Your code:
>    Indication of VCM internal clock dividing rate select,
> 
> Both are dividing the VCM clock rate, no?
> 
clock-presc is used in a different dongwoon binding (dw9768) which more 
accurately matches the function of the hardware, So we concluded that it 
was a more appropriate name.
either way, the values we were using with this property was completely 
incorrect, so it had to be changed either way.

If you'd really prefer us use the older property name we can change it.

> Best regards,
> Krzysztof
> 
many thanks,
Griffin