mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2 1/5] arm64: dts: qcom: sm8650: add ADSP GPR
@ 2023-12-04 15:57 Krzysztof Kozlowski
  2023-12-04 15:57 ` [PATCH v2 2/5] arm64: dts: qcom: sm8650: add LPASS LPI pin controller Krzysztof Kozlowski
                   ` (4 more replies)
  0 siblings, 5 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2023-12-04 15:57 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
	linux-kernel
  Cc: Krzysztof Kozlowski, Neil Armstrong

Add the ADSP Generic Packet Router (GPR) device node as part of audio
subsystem in Qualcomm SM8650 SoC.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes in v2:
1. bedais/dais order (Konrad)
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 40 ++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 41dfa5e19a15..8d327f83edc8 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -4326,6 +4326,46 @@ fastrpc {
 					#address-cells = <1>;
 					#size-cells = <0>;
 				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
 			};
 		};
 
-- 
2.34.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 2/5] arm64: dts: qcom: sm8650: add LPASS LPI pin controller
  2023-12-04 15:57 [PATCH v2 1/5] arm64: dts: qcom: sm8650: add ADSP GPR Krzysztof Kozlowski
@ 2023-12-04 15:57 ` Krzysztof Kozlowski
  2023-12-04 15:57 ` [PATCH v2 3/5] arm64: dts: qcom: sm8650: add ADSP audio codec macros Krzysztof Kozlowski
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2023-12-04 15:57 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
	linux-kernel
  Cc: Krzysztof Kozlowski, Neil Armstrong

Add the Low Power Audio SubSystem Low Power Island (LPASS LPI) pin
controller device node as part of audio subsystem in Qualcomm SM8650
SoC.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 8d327f83edc8..bef4582f2a26 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -21,6 +21,7 @@
 #include <dt-bindings/reset/qcom,sm8650-gpucc.h>
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -2610,6 +2611,19 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 			};
 		};
 
+		lpass_tlmm: pinctrl@6e80000 {
+			compatible = "qcom,sm8650-lpass-lpi-pinctrl";
+			reg = <0 0x06e80000 0 0x20000>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+		};
+
 		lpass_lpiaon_noc: interconnect@7400000 {
 			compatible = "qcom,sm8650-lpass-lpiaon-noc";
 			reg = <0 0x07400000 0 0x19080>;
-- 
2.34.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 3/5] arm64: dts: qcom: sm8650: add ADSP audio codec macros
  2023-12-04 15:57 [PATCH v2 1/5] arm64: dts: qcom: sm8650: add ADSP GPR Krzysztof Kozlowski
  2023-12-04 15:57 ` [PATCH v2 2/5] arm64: dts: qcom: sm8650: add LPASS LPI pin controller Krzysztof Kozlowski
@ 2023-12-04 15:57 ` Krzysztof Kozlowski
  2023-12-05 12:10   ` Konrad Dybcio
  2023-12-04 15:57 ` [PATCH v2 4/5] arm64: dts: qcom: sm8650: add Soundwire controllers Krzysztof Kozlowski
                   ` (2 subsequent siblings)
  4 siblings, 1 reply; 7+ messages in thread
From: Krzysztof Kozlowski @ 2023-12-04 15:57 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
	linux-kernel
  Cc: Krzysztof Kozlowski, Neil Armstrong

Add the Low Power Audio SubSystem (LPASS) / ADSP audio codec macros on
Qualcomm SM8650.  The nodes are very similar to SM8550.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Bindings were documented here:
https://lore.kernel.org/linux-devicetree/20231129113014.38837-1-krzysztof.kozlowski@linaro.org/

Changes in v2:
1. Drop assigned-clock-rates, split clock-names into multiple lines (Konrad)
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 86 ++++++++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index bef4582f2a26..49bc52271301 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -2611,6 +2611,92 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 			};
 		};
 
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06aa0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8650-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
+			reg = <0 0x06ac0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8650-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
+			reg = <0 0x06ae0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06b00000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_vamacro: codec@6d44000 {
+			compatible = "qcom,sm8650-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+			reg = <0 0x06d44000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
 		lpass_tlmm: pinctrl@6e80000 {
 			compatible = "qcom,sm8650-lpass-lpi-pinctrl";
 			reg = <0 0x06e80000 0 0x20000>;
-- 
2.34.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 4/5] arm64: dts: qcom: sm8650: add Soundwire controllers
  2023-12-04 15:57 [PATCH v2 1/5] arm64: dts: qcom: sm8650: add ADSP GPR Krzysztof Kozlowski
  2023-12-04 15:57 ` [PATCH v2 2/5] arm64: dts: qcom: sm8650: add LPASS LPI pin controller Krzysztof Kozlowski
  2023-12-04 15:57 ` [PATCH v2 3/5] arm64: dts: qcom: sm8650: add ADSP audio codec macros Krzysztof Kozlowski
@ 2023-12-04 15:57 ` Krzysztof Kozlowski
  2023-12-04 15:57 ` [PATCH v2 5/5] arm64: dts: qcom: sm8650-mtp: add WSA8845 speakers Krzysztof Kozlowski
  2023-12-08 14:55 ` (subset) [PATCH v2 1/5] arm64: dts: qcom: sm8650: add ADSP GPR Bjorn Andersson
  4 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2023-12-04 15:57 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
	linux-kernel
  Cc: Krzysztof Kozlowski, Neil Armstrong

Add nodes for LPASS Soundwire v2.0.0 controllers.  Use labels with
indices matching downstream DTS, to make any comparisons easier.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes in v2:
1. pinctrl-n/names order (Konrad)
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 226 +++++++++++++++++++++++++++
 1 file changed, 226 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 49bc52271301..68d28a955ecf 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -2628,6 +2628,36 @@ lpass_wsa2macro: codec@6aa0000 {
 			#sound-dai-cells = <1>;
 		};
 
+		swr3: soundwire@6ab0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ab0000 0 0x10000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
 		lpass_rxmacro: codec@6ac0000 {
 			compatible = "qcom,sm8650-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
 			reg = <0 0x06ac0000 0 0x1000>;
@@ -2645,6 +2675,36 @@ lpass_rxmacro: codec@6ac0000 {
 			#sound-dai-cells = <1>;
 		};
 
+		swr1: soundwire@6ad0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ad0000 0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <11>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
 		lpass_txmacro: codec@6ae0000 {
 			compatible = "qcom,sm8650-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
 			reg = <0 0x06ae0000 0 0x1000>;
@@ -2682,6 +2742,68 @@ lpass_wsamacro: codec@6b00000 {
 			#sound-dai-cells = <1>;
 		};
 
+		swr0: soundwire@6b10000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06b10000 0 0x10000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire@6d30000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06d30000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+			clocks = <&lpass_txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
 		lpass_vamacro: codec@6d44000 {
 			compatible = "qcom,sm8650-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
 			reg = <0 0x06d44000 0 0x1000>;
@@ -2708,6 +2830,110 @@ lpass_tlmm: pinctrl@6e80000 {
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
 		};
 
 		lpass_lpiaon_noc: interconnect@7400000 {
-- 
2.34.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 5/5] arm64: dts: qcom: sm8650-mtp: add WSA8845 speakers
  2023-12-04 15:57 [PATCH v2 1/5] arm64: dts: qcom: sm8650: add ADSP GPR Krzysztof Kozlowski
                   ` (2 preceding siblings ...)
  2023-12-04 15:57 ` [PATCH v2 4/5] arm64: dts: qcom: sm8650: add Soundwire controllers Krzysztof Kozlowski
@ 2023-12-04 15:57 ` Krzysztof Kozlowski
  2023-12-08 14:55 ` (subset) [PATCH v2 1/5] arm64: dts: qcom: sm8650: add ADSP GPR Bjorn Andersson
  4 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2023-12-04 15:57 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
	linux-kernel
  Cc: Krzysztof Kozlowski, Neil Armstrong

Add nodes for WSA8845 speakers on SM8650 MTP board.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes in v2:
1. pinctrl-n/names order (Konrad)
---
 arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 48 +++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
index 656cdbc6f234..9d916edb1c73 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -434,6 +434,16 @@ &dispcc {
 	status = "okay";
 };
 
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
 &mdss {
 	status = "okay";
 };
@@ -580,6 +590,36 @@ &sleep_clk {
 	clock-frequency = <32000>;
 };
 
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker Left */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+
+	/* WSA8845, Speaker Right */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+};
+
 &tlmm {
 	/* Reserved I/Os for NFC */
 	gpio-reserved-ranges = <32 8>;
@@ -611,6 +651,14 @@ mdp_vsync_suspend: mdp-vsync-suspend-state {
 		drive-strength = <2>;
 		bias-pull-down;
 	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
 };
 
 &uart15 {
-- 
2.34.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 3/5] arm64: dts: qcom: sm8650: add ADSP audio codec macros
  2023-12-04 15:57 ` [PATCH v2 3/5] arm64: dts: qcom: sm8650: add ADSP audio codec macros Krzysztof Kozlowski
@ 2023-12-05 12:10   ` Konrad Dybcio
  0 siblings, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2023-12-05 12:10 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, devicetree,
	linux-kernel
  Cc: Neil Armstrong



On 12/4/23 16:57, Krzysztof Kozlowski wrote:
> Add the Low Power Audio SubSystem (LPASS) / ADSP audio codec macros on
> Qualcomm SM8650.  The nodes are very similar to SM8550.
> 
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: (subset) [PATCH v2 1/5] arm64: dts: qcom: sm8650: add ADSP GPR
  2023-12-04 15:57 [PATCH v2 1/5] arm64: dts: qcom: sm8650: add ADSP GPR Krzysztof Kozlowski
                   ` (3 preceding siblings ...)
  2023-12-04 15:57 ` [PATCH v2 5/5] arm64: dts: qcom: sm8650-mtp: add WSA8845 speakers Krzysztof Kozlowski
@ 2023-12-08 14:55 ` Bjorn Andersson
  4 siblings, 0 replies; 7+ messages in thread
From: Bjorn Andersson @ 2023-12-08 14:55 UTC (permalink / raw)
  To: Andy Gross, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, linux-arm-msm, devicetree, linux-kernel,
	Krzysztof Kozlowski
  Cc: Neil Armstrong


On Mon, 04 Dec 2023 16:57:42 +0100, Krzysztof Kozlowski wrote:
> Add the ADSP Generic Packet Router (GPR) device node as part of audio
> subsystem in Qualcomm SM8650 SoC.
> 
> 

Applied, thanks!

[1/5] arm64: dts: qcom: sm8650: add ADSP GPR
      commit: ff28260e3d9820a22d9bf826bdf219d6efa97260
[2/5] arm64: dts: qcom: sm8650: add LPASS LPI pin controller
      commit: 2d6bc13321c90217e1ffecf50a183f20c00ec3e3
[3/5] arm64: dts: qcom: sm8650: add ADSP audio codec macros
      commit: 58872a54e4a858d86301b4fb802fd60c45aad3e1
[4/5] arm64: dts: qcom: sm8650: add Soundwire controllers
      commit: 6a45a90c0c475bf6bf573c4ba89e0415506c868a
[5/5] arm64: dts: qcom: sm8650-mtp: add WSA8845 speakers
      commit: 80627a5d72b6be2652920db402fe2477f086902b

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2023-12-08 14:51 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-12-04 15:57 [PATCH v2 1/5] arm64: dts: qcom: sm8650: add ADSP GPR Krzysztof Kozlowski
2023-12-04 15:57 ` [PATCH v2 2/5] arm64: dts: qcom: sm8650: add LPASS LPI pin controller Krzysztof Kozlowski
2023-12-04 15:57 ` [PATCH v2 3/5] arm64: dts: qcom: sm8650: add ADSP audio codec macros Krzysztof Kozlowski
2023-12-05 12:10   ` Konrad Dybcio
2023-12-04 15:57 ` [PATCH v2 4/5] arm64: dts: qcom: sm8650: add Soundwire controllers Krzysztof Kozlowski
2023-12-04 15:57 ` [PATCH v2 5/5] arm64: dts: qcom: sm8650-mtp: add WSA8845 speakers Krzysztof Kozlowski
2023-12-08 14:55 ` (subset) [PATCH v2 1/5] arm64: dts: qcom: sm8650: add ADSP GPR Bjorn Andersson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®