mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: Aaron Lu <aaron.lu@intel.com>,
	linux-pci@vger.kernel.org, x86@kernel.org,
	linux-kernel@vger.kernel.org,
	Stephane Eranian <eranian@google.com>,
	linux-acpi@vger.kernel.org, Borislav Petkov <bp@alien8.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Zheng Z Yan <zheng.z.yan@intel.com>,
	Dave Jones <davej@redhat.com>, Rui Zhang <rui.zhang@intel.com>,
	Yinghai Lu <yinghai@kernel.org>
Subject: Re: [PATCH] PNP: Work around BIOS defects in Intel MCH area reporting
Date: Mon, 21 Apr 2014 22:44:29 +0200	[thread overview]
Message-ID: <1702309.mG1EHfKp35@vostro.rjw.lan> (raw)
In-Reply-To: <20140417202033.7057.98414.stgit@bhelgaas-glaptop.roam.corp.google.com>

Hi Bjorn,

On Thursday, April 17, 2014 02:20:33 PM Bjorn Helgaas wrote:
> Work around BIOSes that don't report the entire Intel MCH area.
> 
> MCHBAR is not an architected PCI BAR, so MCH space is usually reported as a
> PNP0C02 resource.  The MCH space was once 16KB, but is 32KB in newer parts.
> Some BIOSes still report a PNP0C02 resource that is only 16KB, which means
> the rest of the MCH space is consumed but unreported.
> 
> This can cause resource map sanity check warnings or (theoretically) a
> device conflict if we assigned the unreported space to another device.
> 
> The Intel perf event uncore driver tripped over this when it claimed the
> MCH region:
> 
>   resource map sanity check conflict: 0xfed10000 0xfed15fff 0xfed10000 0xfed13fff pnp 00:01
>   Info: mapping multiple BARs. Your kernel is fine.
> 
> To prevent this, if we find a PNP0C02 resource that covers part of the MCH
> space, extend it to cover the entire space.
> 
> Link: http://lkml.kernel.org/r/20140224162400.GE16457@pd.tnic
> Reported-by: Borislav Petkov <bp@alien8.de>
> Tested-by: Borislav Petkov <bp@suse.de>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> Acked-by: Borislav Petkov <bp@suse.de>

Do you want me to take this patch for PNP, or are you planning to take it
into your tree?

Rafael


> ---
>  drivers/pnp/quirks.c |   74 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 74 insertions(+)
> 
> diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
> index 258fef272ea7..90b8c12c220d 100644
> --- a/drivers/pnp/quirks.c
> +++ b/drivers/pnp/quirks.c
> @@ -334,6 +334,79 @@ static void quirk_amd_mmconfig_area(struct pnp_dev *dev)
>  }
>  #endif
>  
> +/* Device IDs of parts that have 32KB MCH space */
> +static const unsigned int mch_quirk_devices[] = {
> +	0x0154,	/* Ivy Bridge */
> +	0x0c00,	/* Haswell */
> +};
> +
> +static struct pci_dev *get_intel_host(void)
> +{
> +	int i;
> +	struct pci_dev *host;
> +
> +	for (i = 0; i < ARRAY_SIZE(mch_quirk_devices); i++) {
> +		host = pci_get_device(PCI_VENDOR_ID_INTEL, mch_quirk_devices[i],
> +				      NULL);
> +		if (host)
> +			return host;
> +	}
> +	return NULL;
> +}
> +
> +static void quirk_intel_mch(struct pnp_dev *dev)
> +{
> +	struct pci_dev *host;
> +	u32 addr_lo, addr_hi;
> +	struct pci_bus_region region;
> +	struct resource mch;
> +	struct pnp_resource *pnp_res;
> +	struct resource *res;
> +
> +	host = get_intel_host();
> +	if (!host)
> +		return;
> +
> +	/*
> +	 * MCHBAR is not an architected PCI BAR, so MCH space is usually
> +	 * reported as a PNP0C02 resource.  The MCH space was originally
> +	 * 16KB, but is 32KB in newer parts.  Some BIOSes still report a
> +	 * PNP0C02 resource that is only 16KB, which means the rest of the
> +	 * MCH space is consumed but unreported.
> +	 */
> +
> +	/*
> +	 * Read MCHBAR for Host Member Mapped Register Range Base
> +	 * https://www-ssl.intel.com/content/www/us/en/processors/core/4th-gen-core-family-desktop-vol-2-datasheet
> +	 * Sec 3.1.12.
> +	 */
> +	pci_read_config_dword(host, 0x48, &addr_lo);
> +	region.start = addr_lo & ~0x7fff;
> +	pci_read_config_dword(host, 0x4c, &addr_hi);
> +	region.start |= (dma_addr_t) addr_hi << 32;
> +	region.end = region.start + 32*1024 - 1;
> +
> +	memset(&mch, 0, sizeof(mch));
> +	mch.flags = IORESOURCE_MEM;
> +	pcibios_bus_to_resource(host->bus, &mch, &region);
> +
> +	list_for_each_entry(pnp_res, &dev->resources, list) {
> +		res = &pnp_res->res;
> +		if (res->end < mch.start || res->start > mch.end)
> +			continue;	/* no overlap */
> +		if (res->start == mch.start && res->end == mch.end)
> +			continue;	/* exact match */
> +
> +		dev_info(&dev->dev, FW_BUG "PNP resource %pR covers only part of %s Intel MCH; extending to %pR\n",
> +			 res, pci_name(host), &mch);
> +		res->start = mch.start;
> +		res->end = mch.end;
> +		break;
> +	}
> +
> +	pci_dev_put(host);
> +}
> +
>  /*
>   *  PnP Quirks
>   *  Cards or devices that need some tweaking due to incomplete resource info
> @@ -364,6 +437,7 @@ static struct pnp_fixup pnp_fixups[] = {
>  #ifdef CONFIG_AMD_NB
>  	{"PNP0c01", quirk_amd_mmconfig_area},
>  #endif
> +	{"PNP0c02", quirk_intel_mch},
>  	{""}
>  };
>  
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

  reply	other threads:[~2014-04-21 20:28 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-17 20:20 Bjorn Helgaas
2014-04-21 20:44 ` Rafael J. Wysocki [this message]
2014-04-21 20:57   ` Bjorn Helgaas
2014-04-21 21:40     ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1702309.mG1EHfKp35@vostro.rjw.lan \
    --to=rjw@rjwysocki.net \
    --cc=aaron.lu@intel.com \
    --cc=bhelgaas@google.com \
    --cc=bp@alien8.de \
    --cc=davej@redhat.com \
    --cc=eranian@google.com \
    --cc=hpa@zytor.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=x86@kernel.org \
    --cc=yinghai@kernel.org \
    --cc=zheng.z.yan@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®