From: Bjorn Helgaas <bhelgaas@google.com>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Aaron Lu <aaron.lu@intel.com>,
linux-pci@vger.kernel.org, x86@kernel.org,
linux-kernel@vger.kernel.org,
Stephane Eranian <eranian@google.com>,
linux-acpi@vger.kernel.org, Borislav Petkov <bp@alien8.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Zheng Z Yan <zheng.z.yan@intel.com>,
Dave Jones <davej@redhat.com>, Rui Zhang <rui.zhang@intel.com>,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH] PNP: Work around BIOS defects in Intel MCH area reporting
Date: Thu, 17 Apr 2014 14:20:33 -0600 [thread overview]
Message-ID: <20140417202033.7057.98414.stgit@bhelgaas-glaptop.roam.corp.google.com> (raw)
Work around BIOSes that don't report the entire Intel MCH area.
MCHBAR is not an architected PCI BAR, so MCH space is usually reported as a
PNP0C02 resource. The MCH space was once 16KB, but is 32KB in newer parts.
Some BIOSes still report a PNP0C02 resource that is only 16KB, which means
the rest of the MCH space is consumed but unreported.
This can cause resource map sanity check warnings or (theoretically) a
device conflict if we assigned the unreported space to another device.
The Intel perf event uncore driver tripped over this when it claimed the
MCH region:
resource map sanity check conflict: 0xfed10000 0xfed15fff 0xfed10000 0xfed13fff pnp 00:01
Info: mapping multiple BARs. Your kernel is fine.
To prevent this, if we find a PNP0C02 resource that covers part of the MCH
space, extend it to cover the entire space.
Link: http://lkml.kernel.org/r/20140224162400.GE16457@pd.tnic
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
---
drivers/pnp/quirks.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
index 258fef272ea7..90b8c12c220d 100644
--- a/drivers/pnp/quirks.c
+++ b/drivers/pnp/quirks.c
@@ -334,6 +334,79 @@ static void quirk_amd_mmconfig_area(struct pnp_dev *dev)
}
#endif
+/* Device IDs of parts that have 32KB MCH space */
+static const unsigned int mch_quirk_devices[] = {
+ 0x0154, /* Ivy Bridge */
+ 0x0c00, /* Haswell */
+};
+
+static struct pci_dev *get_intel_host(void)
+{
+ int i;
+ struct pci_dev *host;
+
+ for (i = 0; i < ARRAY_SIZE(mch_quirk_devices); i++) {
+ host = pci_get_device(PCI_VENDOR_ID_INTEL, mch_quirk_devices[i],
+ NULL);
+ if (host)
+ return host;
+ }
+ return NULL;
+}
+
+static void quirk_intel_mch(struct pnp_dev *dev)
+{
+ struct pci_dev *host;
+ u32 addr_lo, addr_hi;
+ struct pci_bus_region region;
+ struct resource mch;
+ struct pnp_resource *pnp_res;
+ struct resource *res;
+
+ host = get_intel_host();
+ if (!host)
+ return;
+
+ /*
+ * MCHBAR is not an architected PCI BAR, so MCH space is usually
+ * reported as a PNP0C02 resource. The MCH space was originally
+ * 16KB, but is 32KB in newer parts. Some BIOSes still report a
+ * PNP0C02 resource that is only 16KB, which means the rest of the
+ * MCH space is consumed but unreported.
+ */
+
+ /*
+ * Read MCHBAR for Host Member Mapped Register Range Base
+ * https://www-ssl.intel.com/content/www/us/en/processors/core/4th-gen-core-family-desktop-vol-2-datasheet
+ * Sec 3.1.12.
+ */
+ pci_read_config_dword(host, 0x48, &addr_lo);
+ region.start = addr_lo & ~0x7fff;
+ pci_read_config_dword(host, 0x4c, &addr_hi);
+ region.start |= (dma_addr_t) addr_hi << 32;
+ region.end = region.start + 32*1024 - 1;
+
+ memset(&mch, 0, sizeof(mch));
+ mch.flags = IORESOURCE_MEM;
+ pcibios_bus_to_resource(host->bus, &mch, ®ion);
+
+ list_for_each_entry(pnp_res, &dev->resources, list) {
+ res = &pnp_res->res;
+ if (res->end < mch.start || res->start > mch.end)
+ continue; /* no overlap */
+ if (res->start == mch.start && res->end == mch.end)
+ continue; /* exact match */
+
+ dev_info(&dev->dev, FW_BUG "PNP resource %pR covers only part of %s Intel MCH; extending to %pR\n",
+ res, pci_name(host), &mch);
+ res->start = mch.start;
+ res->end = mch.end;
+ break;
+ }
+
+ pci_dev_put(host);
+}
+
/*
* PnP Quirks
* Cards or devices that need some tweaking due to incomplete resource info
@@ -364,6 +437,7 @@ static struct pnp_fixup pnp_fixups[] = {
#ifdef CONFIG_AMD_NB
{"PNP0c01", quirk_amd_mmconfig_area},
#endif
+ {"PNP0c02", quirk_intel_mch},
{""}
};
next reply other threads:[~2014-04-17 20:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-17 20:20 Bjorn Helgaas [this message]
2014-04-21 20:44 ` Rafael J. Wysocki
2014-04-21 20:57 ` Bjorn Helgaas
2014-04-21 21:40 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140417202033.7057.98414.stgit@bhelgaas-glaptop.roam.corp.google.com \
--to=bhelgaas@google.com \
--cc=aaron.lu@intel.com \
--cc=bp@alien8.de \
--cc=davej@redhat.com \
--cc=eranian@google.com \
--cc=hpa@zytor.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=rui.zhang@intel.com \
--cc=x86@kernel.org \
--cc=yinghai@kernel.org \
--cc=zheng.z.yan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®