* [PATCH v2 1/2] dt-bindings: arm: qcom: Add Motorola Moto G 4G (2013)
2023-12-14 20:59 [PATCH v2 0/2] ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree André Apitzsch
@ 2023-12-14 20:59 ` André Apitzsch
2023-12-14 20:59 ` [PATCH v2 2/2] ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree André Apitzsch
2023-12-17 17:21 ` (subset) [PATCH v2 0/2] " Bjorn Andersson
2 siblings, 0 replies; 6+ messages in thread
From: André Apitzsch @ 2023-12-14 20:59 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, phone-devel,
~postmarketos/upstreaming, André Apitzsch,
Krzysztof Kozlowski
Document the compatible for the MSM8926-based Motorola Moto G 4G
smartphone released in 2013.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index c968412d86b8..91dc3205d09e 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -185,6 +185,7 @@ properties:
- enum:
- microsoft,superman-lte
- microsoft,tesla
+ - motorola,peregrine
- const: qcom,msm8926
- const: qcom,msm8226
--
2.43.0
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v2 2/2] ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree
2023-12-14 20:59 [PATCH v2 0/2] ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree André Apitzsch
2023-12-14 20:59 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Add Motorola Moto G 4G (2013) André Apitzsch
@ 2023-12-14 20:59 ` André Apitzsch
2023-12-14 23:37 ` Konrad Dybcio
2023-12-17 17:21 ` (subset) [PATCH v2 0/2] " Bjorn Andersson
2 siblings, 1 reply; 6+ messages in thread
From: André Apitzsch @ 2023-12-14 20:59 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, phone-devel,
~postmarketos/upstreaming, André Apitzsch
This dts adds support for Motorola Moto G 4G released in 2013.
Add a device tree with initial support for:
- GPIO keys
- Hall sensor
- SDHCI
- Vibrator
Signed-off-by: André Apitzsch <git@apitzsch.eu>
---
arch/arm/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/qcom-msm8926-motorola-peregrine.dts | 291 +++++++++++++++++++++
2 files changed, 292 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index 0cb272f4fa45..9cc1e14e6cd0 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8926-htc-memul.dtb \
qcom-msm8926-microsoft-superman-lte.dtb \
qcom-msm8926-microsoft-tesla.dtb \
+ qcom-msm8926-motorola-peregrine.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8960-samsung-expressatt.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
new file mode 100644
index 000000000000..0cbe2d2fbbb1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+ model = "Motorola Moto G 4G (2013)";
+ compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ };
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer0: framebuffer@3200000 {
+ compatible = "simple-framebuffer";
+ reg = <0x03200000 0x800000>;
+ width = <720>;
+ height = <1280>;
+ stride = <(720 * 3)>;
+ format = "r8g8b8";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@3200000 {
+ reg = <0x03200000 0x800000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ sensor@48 {
+ compatible = "ti,tmp108";
+ reg = <0x48>;
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+};
+
+&pm8226_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ };
+
+ pm8226_lvs1: lvs1 {
+ /* Pull-up for I2C lines */
+ regulator-always-on;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ bus-width = <8>;
+ non-removable;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8226_l18>;
+ vqmmc-supply = <&pm8226_l21>;
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+
+ status = "okay";
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <2000000>;
+ qcom,fast-charge-current-limit = <1900000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
+};
+
+&usb {
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
--
2.43.0
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v2 2/2] ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree
2023-12-14 20:59 ` [PATCH v2 2/2] ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree André Apitzsch
@ 2023-12-14 23:37 ` Konrad Dybcio
2023-12-15 20:56 ` André Apitzsch
0 siblings, 1 reply; 6+ messages in thread
From: Konrad Dybcio @ 2023-12-14 23:37 UTC (permalink / raw)
To: André Apitzsch, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, phone-devel,
~postmarketos/upstreaming
On 12/14/23 21:59, André Apitzsch wrote:
> This dts adds support for Motorola Moto G 4G released in 2013.
>
> Add a device tree with initial support for:
>
> - GPIO keys
> - Hall sensor
> - SDHCI
> - Vibrator
>
> Signed-off-by: André Apitzsch <git@apitzsch.eu>
> ---
Excellent, thanks!
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[...]
> + pm8226_lvs1: lvs1 {
> + /* Pull-up for I2C lines */
> + regulator-always-on;
> + };
just one q: is this intended to stay a-on, or will it be bound
to some i2c host (presumably camera)?
Konrad
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v2 2/2] ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree
2023-12-14 23:37 ` Konrad Dybcio
@ 2023-12-15 20:56 ` André Apitzsch
0 siblings, 0 replies; 6+ messages in thread
From: André Apitzsch @ 2023-12-15 20:56 UTC (permalink / raw)
To: Konrad Dybcio, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, phone-devel,
~postmarketos/upstreaming
Am Freitag, dem 15.12.2023 um 00:37 +0100 schrieb Konrad Dybcio:
>
>
> On 12/14/23 21:59, André Apitzsch wrote:
> > This dts adds support for Motorola Moto G 4G released in 2013.
> >
> > Add a device tree with initial support for:
> >
> > - GPIO keys
> > - Hall sensor
> > - SDHCI
> > - Vibrator
> >
> > Signed-off-by: André Apitzsch <git@apitzsch.eu>
> > ---
> Excellent, thanks!
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>
> [...]
>
> > + pm8226_lvs1: lvs1 {
> > + /* Pull-up for I2C lines */
> > + regulator-always-on;
> > + };
> just one q: is this intended to stay a-on, or will it be bound
> to some i2c host (presumably camera)?
>
> Konrad
It's intended to stay always on. At least that's what downstream [1]
did.
André
[1] https://github.com/LineageOS/android_kernel_motorola_msm8226/commit/bac97acacb0a868fa2cf96e53e18d6653c409a1b
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: (subset) [PATCH v2 0/2] ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree
2023-12-14 20:59 [PATCH v2 0/2] ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree André Apitzsch
2023-12-14 20:59 ` [PATCH v2 1/2] dt-bindings: arm: qcom: Add Motorola Moto G 4G (2013) André Apitzsch
2023-12-14 20:59 ` [PATCH v2 2/2] ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree André Apitzsch
@ 2023-12-17 17:21 ` Bjorn Andersson
2 siblings, 0 replies; 6+ messages in thread
From: Bjorn Andersson @ 2023-12-17 17:21 UTC (permalink / raw)
To: Andy Gross, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, André Apitzsch
Cc: linux-arm-msm, devicetree, linux-kernel, phone-devel,
~postmarketos/upstreaming, Krzysztof Kozlowski
On Thu, 14 Dec 2023 21:59:32 +0100, André Apitzsch wrote:
> This dts adds support for Motorola Moto G 4G released in 2013.
>
> Add a device tree with initial support for:
>
> - GPIO keys
> - Hall sensor
> - SDHCI
> - Vibrator
>
> [...]
Applied, thanks!
[2/2] ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree
commit: 690e367e0e75a46a0b3d76ae42a14f7f31f451dd
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 6+ messages in thread