* [PATCH v3 0/2] Add pm8010 RPMH regulators for sm8550 boards
@ 2023-12-15 8:01 Fenglin Wu via B4 Relay
2023-12-15 8:01 ` [PATCH v3 1/2] arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators Fenglin Wu via B4 Relay
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Fenglin Wu via B4 Relay @ 2023-12-15 8:01 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Liam Girdwood,
Mark Brown, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
kernel
Cc: Krzysztof Kozlowski, linux-arm-msm, linux-kernel, devicetree,
quic_collinsd, quic_subbaram, quic_jprakash, Fenglin Wu
There are 2 PM8010 PMICs present in sm8550-mtp/sm8550-qrd boards and
each of them exposes 7 LDOs. Add RPMH regulator support for them.
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
Changes in v3:
- Mark has already applied the driver and dt-binding commits in regulator/for-next so only board
file commits left.
- Added Reviewed-by tag.
- Link to v2: https://lore.kernel.org/r/20231214-pm8010-regulator-v2-0-82131df6b97b@quicinc.com
Changes in v2:
- Updated subject prefix in the dt-binding commit and fixed the typo.
- Separate the DTS commit with board name prefixes.
- Link to v1: https://lore.kernel.org/r/20231211-pm8010-regulator-v1-0-571e05fb4ecc@quicinc.com
---
Fenglin Wu (2):
arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 120 ++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 120 ++++++++++++++++++++++++++++++++
2 files changed, 240 insertions(+)
---
base-commit: 753e4d5c433da57da75dd4c3e1aececc8e874a62
change-id: 20231205-pm8010-regulator-0348cb19087a
Best regards,
--
Fenglin Wu <quic_fenglinw@quicinc.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v3 1/2] arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
2023-12-15 8:01 [PATCH v3 0/2] Add pm8010 RPMH regulators for sm8550 boards Fenglin Wu via B4 Relay
@ 2023-12-15 8:01 ` Fenglin Wu via B4 Relay
2023-12-15 8:01 ` [PATCH v3 2/2] arm64: dts: qcom: sm8550-qrd: add PM8010 regulators Fenglin Wu via B4 Relay
2023-12-17 17:21 ` [PATCH v3 0/2] Add pm8010 RPMH regulators for sm8550 boards Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Fenglin Wu via B4 Relay @ 2023-12-15 8:01 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Liam Girdwood,
Mark Brown, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
kernel
Cc: Krzysztof Kozlowski, linux-arm-msm, linux-kernel, devicetree,
quic_collinsd, quic_subbaram, quic_jprakash, Fenglin Wu
From: Fenglin Wu <quic_fenglinw@quicinc.com>
Add PM8010 regulator device nodes for sm8550-mtp board.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 120 ++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 9a70875028b7..8395d363d18d 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -510,6 +510,126 @@ vreg_l3g_1p2: ldo3 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
+
+ regulators-6 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "m";
+
+ vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+ vdd-l3-l4-supply = <&vreg_bob2>;
+ vdd-l5-supply = <&vreg_s6g_1p8>;
+ vdd-l6-supply = <&vreg_s6g_1p8>;
+ vdd-l7-supply = <&vreg_bob1>;
+
+ vreg_l1m_1p056: ldo1 {
+ regulator-name = "vreg_l1m_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2m_1p056: ldo2 {
+ regulator-name = "vreg_l2m_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3m_2p8: ldo3 {
+ regulator-name = "vreg_l3m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4m_2p8: ldo4 {
+ regulator-name = "vreg_l4m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5m_1p8: ldo5 {
+ regulator-name = "vreg_l5m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6m_1p8: ldo6 {
+ regulator-name = "vreg_l6m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7m_2p9: ldo7 {
+ regulator-name = "vreg_l7m_2p9";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "n";
+
+ vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+ vdd-l3-l4-supply = <&vreg_bob2>;
+ vdd-l5-supply = <&vreg_s6g_1p8>;
+ vdd-l6-supply = <&vreg_bob1>;
+ vdd-l7-supply = <&vreg_bob1>;
+
+ vreg_l1n_1p1: ldo1 {
+ regulator-name = "vreg_l1n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2n_1p1: ldo2 {
+ regulator-name = "vreg_l2n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3n_2p8: ldo3 {
+ regulator-name = "vreg_l3n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4n_2p8: ldo4 {
+ regulator-name = "vreg_l4n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5n_1p8: ldo5 {
+ regulator-name = "vreg_l5n_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6n_3p3: ldo6 {
+ regulator-name = "vreg_l6n_3p3";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7n_2p96: ldo7 {
+ regulator-name = "vreg_l7n_2p96";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
};
&i2c_master_hub_0 {
--
2.25.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v3 2/2] arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
2023-12-15 8:01 [PATCH v3 0/2] Add pm8010 RPMH regulators for sm8550 boards Fenglin Wu via B4 Relay
2023-12-15 8:01 ` [PATCH v3 1/2] arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators Fenglin Wu via B4 Relay
@ 2023-12-15 8:01 ` Fenglin Wu via B4 Relay
2023-12-17 17:21 ` [PATCH v3 0/2] Add pm8010 RPMH regulators for sm8550 boards Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Fenglin Wu via B4 Relay @ 2023-12-15 8:01 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Liam Girdwood,
Mark Brown, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
kernel
Cc: Krzysztof Kozlowski, linux-arm-msm, linux-kernel, devicetree,
quic_collinsd, quic_subbaram, quic_jprakash, Fenglin Wu
From: Fenglin Wu <quic_fenglinw@quicinc.com>
Add PM8010 regulator device nodes for sm8550-qrd board.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 120 ++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index eef811def39b..7ca93c149215 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -527,6 +527,126 @@ vreg_l3g_1p2: ldo3 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
+
+ regulators-6 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "m";
+
+ vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+ vdd-l3-l4-supply = <&vreg_bob2>;
+ vdd-l5-supply = <&vreg_s6g_1p86>;
+ vdd-l6-supply = <&vreg_s6g_1p86>;
+ vdd-l7-supply = <&vreg_bob1>;
+
+ vreg_l1m_1p056: ldo1 {
+ regulator-name = "vreg_l1m_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2m_1p056: ldo2 {
+ regulator-name = "vreg_l2m_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3m_2p8: ldo3 {
+ regulator-name = "vreg_l3m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4m_2p8: ldo4 {
+ regulator-name = "vreg_l4m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5m_1p8: ldo5 {
+ regulator-name = "vreg_l5m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6m_1p8: ldo6 {
+ regulator-name = "vreg_l6m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7m_2p9: ldo7 {
+ regulator-name = "vreg_l7m_2p9";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "n";
+
+ vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+ vdd-l3-l4-supply = <&vreg_bob2>;
+ vdd-l5-supply = <&vreg_s6g_1p86>;
+ vdd-l6-supply = <&vreg_bob1>;
+ vdd-l7-supply = <&vreg_bob1>;
+
+ vreg_l1n_1p1: ldo1 {
+ regulator-name = "vreg_l1n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2n_1p1: ldo2 {
+ regulator-name = "vreg_l2n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3n_2p8: ldo3 {
+ regulator-name = "vreg_l3n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4n_2p8: ldo4 {
+ regulator-name = "vreg_l4n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5n_1p8: ldo5 {
+ regulator-name = "vreg_l5n_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6n_3p3: ldo6 {
+ regulator-name = "vreg_l6n_3p3";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7n_2p96: ldo7 {
+ regulator-name = "vreg_l7n_2p96";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
};
&i2c_master_hub_0 {
--
2.25.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3 0/2] Add pm8010 RPMH regulators for sm8550 boards
2023-12-15 8:01 [PATCH v3 0/2] Add pm8010 RPMH regulators for sm8550 boards Fenglin Wu via B4 Relay
2023-12-15 8:01 ` [PATCH v3 1/2] arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators Fenglin Wu via B4 Relay
2023-12-15 8:01 ` [PATCH v3 2/2] arm64: dts: qcom: sm8550-qrd: add PM8010 regulators Fenglin Wu via B4 Relay
@ 2023-12-17 17:21 ` Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Bjorn Andersson @ 2023-12-17 17:21 UTC (permalink / raw)
To: Andy Gross, Konrad Dybcio, Liam Girdwood, Mark Brown,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, kernel,
Fenglin Wu
Cc: Krzysztof Kozlowski, linux-arm-msm, linux-kernel, devicetree,
quic_collinsd, quic_subbaram, quic_jprakash
On Fri, 15 Dec 2023 16:01:44 +0800, Fenglin Wu wrote:
> There are 2 PM8010 PMICs present in sm8550-mtp/sm8550-qrd boards and
> each of them exposes 7 LDOs. Add RPMH regulator support for them.
>
>
Applied, thanks!
[1/2] arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
commit: 64dcc3d779abd4065d919d855979b33026370125
[2/2] arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
commit: 1d01007a62df2e49854d5727ba2b0ad794d2eb22
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-12-17 17:22 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-12-15 8:01 [PATCH v3 0/2] Add pm8010 RPMH regulators for sm8550 boards Fenglin Wu via B4 Relay
2023-12-15 8:01 ` [PATCH v3 1/2] arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators Fenglin Wu via B4 Relay
2023-12-15 8:01 ` [PATCH v3 2/2] arm64: dts: qcom: sm8550-qrd: add PM8010 regulators Fenglin Wu via B4 Relay
2023-12-17 17:21 ` [PATCH v3 0/2] Add pm8010 RPMH regulators for sm8550 boards Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®