mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
To: "Tiezhu Yang" <yangtiezhu@loongson.cn>
Cc: "Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
	"Huacai Chen" <chenhc@lemote.com>,
	"linux-mips" <linux-mips@vger.kernel.org>,
	"linux-kernel" <linux-kernel@vger.kernel.org>,
	"Xuefeng Li" <lixuefeng@loongson.cn>
Subject: 回复:[PATCH] MIPS: Loongson: Add model name to /proc/cpuinfo
Date: Wed, 11 Mar 2020 14:53:01 +0800	[thread overview]
Message-ID: <170c85e33ef.10e7ed4c64871.7120630740497911364@flygoat.com> (raw)
In-Reply-To: <1583908414-22858-1-git-send-email-yangtiezhu@loongson.cn>



 ---- 在 星期三, 2020-03-11 14:33:34 Tiezhu Yang <yangtiezhu@loongson.cn> 撰写 ----
 > In the current code, when execute command "cat /proc/cpuinfo" or "lscpu",
 > it can not get cpu type and frequency directly because the model name is
 > not exist, so add it.
 > 
 > E.g. without this patch:
 > 
 > [loongson@localhost ~]$ lscpu
 > Architecture:          mips64
 > Byte Order:            Little Endian
 > CPU(s):                4
 > On-line CPU(s) list:   0-3
 > Thread(s) per core:    1
 > Core(s) per socket:    4
 > Socket(s):             1
 > NUMA node(s):          1
 > L1d cache:             64K
 > L1i cache:             64K
 > L2 cache:              2048K
 > NUMA node0 CPU(s):     0-3
 > 
 > With this patch:
 > 
 > [loongson@localhost ~]$ lscpu
 > Architecture:          mips64
 > Byte Order:            Little Endian
 > CPU(s):                4
 > On-line CPU(s) list:   0-3
 > Thread(s) per core:    1
 > Core(s) per socket:    4
 > Socket(s):             1
 > NUMA node(s):          1
 > Model name:            Loongson-3A R3 (Loongson-3A3000) @ 1449MHz
 > L1d cache:             64K
 > L1i cache:             64K
 > L2 cache:              2048K
 > NUMA node0 CPU(s):     0-3

Hi Tiezhu,

Thanks for your patch, you're the successor of Huacai:

https://www.linux-mips.org/archives/linux-mips/2018-09/msg00113.html

I think it's worthy to have this string in cpuinfo as many userspace
program is parsing it beacuse x86 have it. 

See my review comments below:

 > 
 > Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
 > ---
 >  arch/mips/include/asm/cpu-info.h |  1 +
 >  arch/mips/kernel/cpu-probe.c     | 27 +++++++++++++++++++++++----
 >  arch/mips/kernel/proc.c          |  4 ++++
 >  3 files changed, 28 insertions(+), 4 deletions(-)
 > 
 > diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
 > index ed7ffe4..50e924e 100644
 > --- a/arch/mips/include/asm/cpu-info.h
 > +++ b/arch/mips/include/asm/cpu-info.h
 > @@ -115,6 +115,7 @@ extern struct cpuinfo_mips cpu_data[];
 >  extern void cpu_probe(void);
 >  extern void cpu_report(void);
 >  
 > +extern const char *__model_name[];
 >  extern const char *__cpu_name[];
 >  #define cpu_name_string()    __cpu_name[raw_smp_processor_id()]
 >  
 > diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
 > index 6ab6b03..3ae40cc 100644
 > --- a/arch/mips/kernel/cpu-probe.c
 > +++ b/arch/mips/kernel/cpu-probe.c
 > @@ -1548,6 +1548,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 >              set_elf_platform(cpu, "loongson2e");
 >              set_isa(c, MIPS_CPU_ISA_III);
 >              c->fpu_msk31 |= FPU_CSR_CONDX;
 > +            __model_name[cpu] = "Loongson-2E";
 >              break;
 >          case PRID_REV_LOONGSON2F:
 >              c->cputype = CPU_LOONGSON2EF;
 > @@ -1555,23 +1556,37 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 >              set_elf_platform(cpu, "loongson2f");
 >              set_isa(c, MIPS_CPU_ISA_III);
 >              c->fpu_msk31 |= FPU_CSR_CONDX;
 > +            __model_name[cpu] = "Loongson-2F";
 >              break;
 >          case PRID_REV_LOONGSON3A_R1:
 >              c->cputype = CPU_LOONGSON64;
 >              __cpu_name[cpu] = "ICT Loongson-3";
 >              set_elf_platform(cpu, "loongson3a");
 >              set_isa(c, MIPS_CPU_ISA_M64R1);
 > -            c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
 > -                MIPS_ASE_LOONGSON_EXT);
 > +            c->ases |= (MIPS_ASE_LOONGSON_MMI |
 > +                    MIPS_ASE_LOONGSON_CAM |
 > +                    MIPS_ASE_LOONGSON_EXT);

Is the newline intentional?
Also applied to code below.

 > +            __model_name[cpu] = "Loongson-3A R1 (Loongson-3A1000)";
 >              break;
 >          case PRID_REV_LOONGSON3B_R1:
 > +            c->cputype = CPU_LOONGSON64;
 > +            __cpu_name[cpu] = "ICT Loongson-3";
 > +            set_elf_platform(cpu, "loongson3b");
 > +            set_isa(c, MIPS_CPU_ISA_M64R1);
 > +            c->ases |= (MIPS_ASE_LOONGSON_MMI |
 > +                    MIPS_ASE_LOONGSON_CAM |
 > +                    MIPS_ASE_LOONGSON_EXT);
 > +            __model_name[cpu] = "Loongson-3B R1 (Loongson-3B1000)";
 > +            break;
 >          case PRID_REV_LOONGSON3B_R2:
 >              c->cputype = CPU_LOONGSON64;
 >              __cpu_name[cpu] = "ICT Loongson-3";
 >              set_elf_platform(cpu, "loongson3b");
 >              set_isa(c, MIPS_CPU_ISA_M64R1);
 > -            c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
 > -                MIPS_ASE_LOONGSON_EXT);
 > +            c->ases |= (MIPS_ASE_LOONGSON_MMI |
 > +                    MIPS_ASE_LOONGSON_CAM |
 > +                    MIPS_ASE_LOONGSON_EXT);
 > +            __model_name[cpu] = "Loongson-3B R2 (Loongson-3B1500)";
 >              break;
 >          }
 >  
 > @@ -1926,6 +1941,7 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
 >              __cpu_name[cpu] = "ICT Loongson-3";
 >              set_elf_platform(cpu, "loongson3a");
 >              set_isa(c, MIPS_CPU_ISA_M64R2);
 > +            __model_name[cpu] = "Loongson-3A R2 (Loongson-3A2000)";
 >              break;
 >          case PRID_REV_LOONGSON3A_R3_0:
 >          case PRID_REV_LOONGSON3A_R3_1:
 > @@ -1933,6 +1949,7 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
 >              __cpu_name[cpu] = "ICT Loongson-3";
 >              set_elf_platform(cpu, "loongson3a");
 >              set_isa(c, MIPS_CPU_ISA_M64R2);
 > +            __model_name[cpu] = "Loongson-3A R3 (Loongson-3A3000)";
 >              break;
 >          }
 >  
 > @@ -1952,6 +1969,7 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
 >          c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 >          c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
 >              MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2);
 > +        __model_name[cpu] = "Loongson-3A R4 (Loongson-3A4000)";
 >          break;
 >      default:
 >          panic("Unknown Loongson Processor ID!");
 > @@ -2111,6 +2129,7 @@ u64 __ua_limit;
 >  EXPORT_SYMBOL(__ua_limit);
 >  #endif
 >  
 > +const char *__model_name[NR_CPUS];
 >  const char *__cpu_name[NR_CPUS];
 >  const char *__elf_platform;
 >  
 > diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
 > index f8d3671..5fc74e6 100644
 > --- a/arch/mips/kernel/proc.c
 > +++ b/arch/mips/kernel/proc.c
 > @@ -15,6 +15,7 @@
 >  #include <asm/mipsregs.h>
 >  #include <asm/processor.h>
 >  #include <asm/prom.h>
 > +#include <asm/time.h>
 >  
 >  unsigned int vced_count, vcei_count;
 >  
 > @@ -63,6 +64,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 >      seq_printf(m, fmt, __cpu_name[n],
 >                (version >> 4) & 0x0f, version & 0x0f,
 >                (fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
 > +    if (__model_name[n])
 > +        seq_printf(m, "model name\t\t: %s @ %uMHz\n",
 > +              __model_name[n], mips_hpt_frequency / 500000);
 >      seq_printf(m, "BogoMIPS\t\t: %u.%02u\n",

Actually I don't think take mips_hpt_frequency here is a good option. mips_hpt_frequency
is used by cevt-r4k. Processors like Ingenic don't use cevt-r4k don't have it.

Probably you can do as what Huacai did, append the frequency part in platform code. 
 
>                cpu_data[n].udelay_val / (500000/HZ),
 >                (cpu_data[n].udelay_val / (5000/HZ)) % 100);
 > -- 
 > 2.1.0
 > 
 > 

Thanks.

--
Jiaxun Yang

  reply	other threads:[~2020-03-11  6:53 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-11  6:33 [PATCH] " Tiezhu Yang
2020-03-11  6:53 ` Jiaxun Yang [this message]
2020-03-11  9:28   ` 回复:[PATCH] " Tiezhu Yang
2020-03-11  7:18 ` [PATCH] " YunQiang Su
2020-03-11  7:41   ` Jiaxun Yang
2020-03-11  9:40   ` Tiezhu Yang
2020-03-12  7:25     ` Tiezhu Yang
2020-03-11  9:58 ` Manuel Lauss
2020-03-11 10:27   ` Jiaxun Yang
2020-03-20 21:24     ` Maciej W. Rozycki
2020-03-21  1:20       ` YunQiang Su

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=170c85e33ef.10e7ed4c64871.7120630740497911364@flygoat.com \
    --to=jiaxun.yang@flygoat.com \
    --cc=chenhc@lemote.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=lixuefeng@loongson.cn \
    --cc=tsbogend@alpha.franken.de \
    --cc=yangtiezhu@loongson.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®