From: Tiezhu Yang <yangtiezhu@loongson.cn>
To: YunQiang Su <wzssyqa@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Huacai Chen <chenhc@lemote.com>,
Jiaxun Yang <jiaxun.yang@flygoat.com>,
linux-mips <linux-mips@vger.kernel.org>,
linux-kernel@vger.kernel.org, Xuefeng Li <lixuefeng@loongson.cn>
Subject: Re: [PATCH] MIPS: Loongson: Add model name to /proc/cpuinfo
Date: Wed, 11 Mar 2020 17:40:56 +0800 [thread overview]
Message-ID: <8f0eaa0b-e95c-4612-f3a3-9efcd523ae66@loongson.cn> (raw)
In-Reply-To: <CAKcpw6VBiFddr=QsB_HDYStX8Mh7=tf3B_onFDViAq8s_G0gbQ@mail.gmail.com>
On 03/11/2020 03:18 PM, YunQiang Su wrote:
> Tiezhu Yang <yangtiezhu@loongson.cn> 于2020年3月11日周三 下午2:33写道:
>> In the current code, when execute command "cat /proc/cpuinfo" or "lscpu",
>> it can not get cpu type and frequency directly because the model name is
>> not exist, so add it.
> You patch is almost the same with the previous Huacai's.
> How do you think about the copyright issue?
>
> FYI: GPL is copyleft instead of no-copyright-exists-at-all.
> I have no idea about whether Loongson has any consideration about copyright,
> while it is really quite important.
Hi YunQiang & Jiaxun,
Frankly, I don't know there exists a similar patch in 2018
which has not been merged into the mainline tree, I just
want to fix the issue of model name when execute cmd
"cat /proc/cpuinfo" or "lscpu".
How to avoid and solve this case?
Add a proper label in the patch?
Thanks,
Tiezhu Yang
>
>> E.g. without this patch:
>>
>> [loongson@localhost ~]$ lscpu
>> Architecture: mips64
>> Byte Order: Little Endian
>> CPU(s): 4
>> On-line CPU(s) list: 0-3
>> Thread(s) per core: 1
>> Core(s) per socket: 4
>> Socket(s): 1
>> NUMA node(s): 1
>> L1d cache: 64K
>> L1i cache: 64K
>> L2 cache: 2048K
>> NUMA node0 CPU(s): 0-3
>>
>> With this patch:
>>
>> [loongson@localhost ~]$ lscpu
>> Architecture: mips64
>> Byte Order: Little Endian
>> CPU(s): 4
>> On-line CPU(s) list: 0-3
>> Thread(s) per core: 1
>> Core(s) per socket: 4
>> Socket(s): 1
>> NUMA node(s): 1
>> Model name: Loongson-3A R3 (Loongson-3A3000) @ 1449MHz
>> L1d cache: 64K
>> L1i cache: 64K
>> L2 cache: 2048K
>> NUMA node0 CPU(s): 0-3
>>
>> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
>> ---
>> arch/mips/include/asm/cpu-info.h | 1 +
>> arch/mips/kernel/cpu-probe.c | 27 +++++++++++++++++++++++----
>> arch/mips/kernel/proc.c | 4 ++++
>> 3 files changed, 28 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
>> index ed7ffe4..50e924e 100644
>> --- a/arch/mips/include/asm/cpu-info.h
>> +++ b/arch/mips/include/asm/cpu-info.h
>> @@ -115,6 +115,7 @@ extern struct cpuinfo_mips cpu_data[];
>> extern void cpu_probe(void);
>> extern void cpu_report(void);
>>
>> +extern const char *__model_name[];
>> extern const char *__cpu_name[];
>> #define cpu_name_string() __cpu_name[raw_smp_processor_id()]
>>
>> diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
>> index 6ab6b03..3ae40cc 100644
>> --- a/arch/mips/kernel/cpu-probe.c
>> +++ b/arch/mips/kernel/cpu-probe.c
>> @@ -1548,6 +1548,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
>> set_elf_platform(cpu, "loongson2e");
>> set_isa(c, MIPS_CPU_ISA_III);
>> c->fpu_msk31 |= FPU_CSR_CONDX;
>> + __model_name[cpu] = "Loongson-2E";
>> break;
>> case PRID_REV_LOONGSON2F:
>> c->cputype = CPU_LOONGSON2EF;
>> @@ -1555,23 +1556,37 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
>> set_elf_platform(cpu, "loongson2f");
>> set_isa(c, MIPS_CPU_ISA_III);
>> c->fpu_msk31 |= FPU_CSR_CONDX;
>> + __model_name[cpu] = "Loongson-2F";
>> break;
>> case PRID_REV_LOONGSON3A_R1:
>> c->cputype = CPU_LOONGSON64;
>> __cpu_name[cpu] = "ICT Loongson-3";
>> set_elf_platform(cpu, "loongson3a");
>> set_isa(c, MIPS_CPU_ISA_M64R1);
>> - c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
>> - MIPS_ASE_LOONGSON_EXT);
>> + c->ases |= (MIPS_ASE_LOONGSON_MMI |
>> + MIPS_ASE_LOONGSON_CAM |
>> + MIPS_ASE_LOONGSON_EXT);
>> + __model_name[cpu] = "Loongson-3A R1 (Loongson-3A1000)";
>> break;
>> case PRID_REV_LOONGSON3B_R1:
>> + c->cputype = CPU_LOONGSON64;
>> + __cpu_name[cpu] = "ICT Loongson-3";
>> + set_elf_platform(cpu, "loongson3b");
>> + set_isa(c, MIPS_CPU_ISA_M64R1);
>> + c->ases |= (MIPS_ASE_LOONGSON_MMI |
>> + MIPS_ASE_LOONGSON_CAM |
>> + MIPS_ASE_LOONGSON_EXT);
>> + __model_name[cpu] = "Loongson-3B R1 (Loongson-3B1000)";
>> + break;
>> case PRID_REV_LOONGSON3B_R2:
>> c->cputype = CPU_LOONGSON64;
>> __cpu_name[cpu] = "ICT Loongson-3";
>> set_elf_platform(cpu, "loongson3b");
>> set_isa(c, MIPS_CPU_ISA_M64R1);
>> - c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
>> - MIPS_ASE_LOONGSON_EXT);
>> + c->ases |= (MIPS_ASE_LOONGSON_MMI |
>> + MIPS_ASE_LOONGSON_CAM |
>> + MIPS_ASE_LOONGSON_EXT);
>> + __model_name[cpu] = "Loongson-3B R2 (Loongson-3B1500)";
>> break;
>> }
>>
>> @@ -1926,6 +1941,7 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
>> __cpu_name[cpu] = "ICT Loongson-3";
>> set_elf_platform(cpu, "loongson3a");
>> set_isa(c, MIPS_CPU_ISA_M64R2);
>> + __model_name[cpu] = "Loongson-3A R2 (Loongson-3A2000)";
>> break;
>> case PRID_REV_LOONGSON3A_R3_0:
>> case PRID_REV_LOONGSON3A_R3_1:
>> @@ -1933,6 +1949,7 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
>> __cpu_name[cpu] = "ICT Loongson-3";
>> set_elf_platform(cpu, "loongson3a");
>> set_isa(c, MIPS_CPU_ISA_M64R2);
>> + __model_name[cpu] = "Loongson-3A R3 (Loongson-3A3000)";
>> break;
>> }
>>
>> @@ -1952,6 +1969,7 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
>> c->writecombine = _CACHE_UNCACHED_ACCELERATED;
>> c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
>> MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2);
>> + __model_name[cpu] = "Loongson-3A R4 (Loongson-3A4000)";
>> break;
>> default:
>> panic("Unknown Loongson Processor ID!");
>> @@ -2111,6 +2129,7 @@ u64 __ua_limit;
>> EXPORT_SYMBOL(__ua_limit);
>> #endif
>>
>> +const char *__model_name[NR_CPUS];
>> const char *__cpu_name[NR_CPUS];
>> const char *__elf_platform;
>>
>> diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
>> index f8d3671..5fc74e6 100644
>> --- a/arch/mips/kernel/proc.c
>> +++ b/arch/mips/kernel/proc.c
>> @@ -15,6 +15,7 @@
>> #include <asm/mipsregs.h>
>> #include <asm/processor.h>
>> #include <asm/prom.h>
>> +#include <asm/time.h>
>>
>> unsigned int vced_count, vcei_count;
>>
>> @@ -63,6 +64,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
>> seq_printf(m, fmt, __cpu_name[n],
>> (version >> 4) & 0x0f, version & 0x0f,
>> (fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
>> + if (__model_name[n])
>> + seq_printf(m, "model name\t\t: %s @ %uMHz\n",
>> + __model_name[n], mips_hpt_frequency / 500000);
>> seq_printf(m, "BogoMIPS\t\t: %u.%02u\n",
>> cpu_data[n].udelay_val / (500000/HZ),
>> (cpu_data[n].udelay_val / (5000/HZ)) % 100);
>> --
>> 2.1.0
>>
>
next prev parent reply other threads:[~2020-03-11 9:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-11 6:33 Tiezhu Yang
2020-03-11 6:53 ` 回复:[PATCH] " Jiaxun Yang
2020-03-11 9:28 ` Tiezhu Yang
2020-03-11 7:18 ` [PATCH] " YunQiang Su
2020-03-11 7:41 ` Jiaxun Yang
2020-03-11 9:40 ` Tiezhu Yang [this message]
2020-03-12 7:25 ` Tiezhu Yang
2020-03-11 9:58 ` Manuel Lauss
2020-03-11 10:27 ` Jiaxun Yang
2020-03-20 21:24 ` Maciej W. Rozycki
2020-03-21 1:20 ` YunQiang Su
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8f0eaa0b-e95c-4612-f3a3-9efcd523ae66@loongson.cn \
--to=yangtiezhu@loongson.cn \
--cc=chenhc@lemote.com \
--cc=jiaxun.yang@flygoat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=lixuefeng@loongson.cn \
--cc=tsbogend@alpha.franken.de \
--cc=wzssyqa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®