[net PATCH] octeontx2-af: Fix NIX SQ mode and BP config

[net PATCH] octeontx2-af: Fix NIX SQ mode and BP config

[Geetha sowjanya]

NIX SQ mode and link backpressure configuration is required for
all platforms. But in current driver this code is wrongly placed
under specific platform check. This patch fixes the issue by 
moving the code out of platform check.

Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
---
 .../ethernet/marvell/octeontx2/af/rvu_nix.c   | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index d39001cdc707..00af8888e329 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -4819,18 +4819,18 @@ static int rvu_nix_block_init(struct rvu *rvu, struct nix_hw *nix_hw)
 		 */
 		rvu_write64(rvu, blkaddr, NIX_AF_CFG,
 			    rvu_read64(rvu, blkaddr, NIX_AF_CFG) | 0x40ULL);
+	}
 
-		/* Set chan/link to backpressure TL3 instead of TL2 */
-		rvu_write64(rvu, blkaddr, NIX_AF_PSE_CHANNEL_LEVEL, 0x01);
+	/* Set chan/link to backpressure TL3 instead of TL2 */
+	rvu_write64(rvu, blkaddr, NIX_AF_PSE_CHANNEL_LEVEL, 0x01);
 
-		/* Disable SQ manager's sticky mode operation (set TM6 = 0)
-		 * This sticky mode is known to cause SQ stalls when multiple
-		 * SQs are mapped to same SMQ and transmitting pkts at a time.
-		 */
-		cfg = rvu_read64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS);
-		cfg &= ~BIT_ULL(15);
-		rvu_write64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS, cfg);
-	}
+	/* Disable SQ manager's sticky mode operation (set TM6 = 0)
+	 * This sticky mode is known to cause SQ stalls when multiple
+	 * SQs are mapped to same SMQ and transmitting pkts at a time.
+	 */
+	cfg = rvu_read64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS);
+	cfg &= ~BIT_ULL(15);
+	rvu_write64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS, cfg);
 
 	ltdefs = rvu->kpu.lt_def;
 	/* Calibrate X2P bus to check if CGX/LBK links are fine */
-- 
2.25.1

Re: [net PATCH] octeontx2-af: Fix NIX SQ mode and BP config

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net.git (main)
by Paolo Abeni <pabeni@redhat.com>:

On Mon, 8 Apr 2024 12:06:43 +0530 you wrote:
> NIX SQ mode and link backpressure configuration is required for
> all platforms. But in current driver this code is wrongly placed
> under specific platform check. This patch fixes the issue by
> moving the code out of platform check.
> 
> Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
> Signed-off-by: Geetha sowjanya <gakula@marvell.com>
> 
> [...]

Here is the summary with links:
  - [net] octeontx2-af: Fix NIX SQ mode and BP config
    https://git.kernel.org/netdev/net/c/faf23006185e

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

[net PATCH] octeontx2-af: Fix NIX SQ mode and BP config

[Geetha sowjanya]

NIX SQ mode and link backpressure configuration is required for
all platforms. But in current driver this code is wrongly placed
under specific platform check. This patch fixes the issue by 
moving the code out of platform check.

Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
---
 .../ethernet/marvell/octeontx2/af/rvu_nix.c   | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index d39001cdc707..00af8888e329 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -4819,18 +4819,18 @@ static int rvu_nix_block_init(struct rvu *rvu, struct nix_hw *nix_hw)
 		 */
 		rvu_write64(rvu, blkaddr, NIX_AF_CFG,
 			    rvu_read64(rvu, blkaddr, NIX_AF_CFG) | 0x40ULL);
+	}
 
-		/* Set chan/link to backpressure TL3 instead of TL2 */
-		rvu_write64(rvu, blkaddr, NIX_AF_PSE_CHANNEL_LEVEL, 0x01);
+	/* Set chan/link to backpressure TL3 instead of TL2 */
+	rvu_write64(rvu, blkaddr, NIX_AF_PSE_CHANNEL_LEVEL, 0x01);
 
-		/* Disable SQ manager's sticky mode operation (set TM6 = 0)
-		 * This sticky mode is known to cause SQ stalls when multiple
-		 * SQs are mapped to same SMQ and transmitting pkts at a time.
-		 */
-		cfg = rvu_read64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS);
-		cfg &= ~BIT_ULL(15);
-		rvu_write64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS, cfg);
-	}
+	/* Disable SQ manager's sticky mode operation (set TM6 = 0)
+	 * This sticky mode is known to cause SQ stalls when multiple
+	 * SQs are mapped to same SMQ and transmitting pkts at a time.
+	 */
+	cfg = rvu_read64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS);
+	cfg &= ~BIT_ULL(15);
+	rvu_write64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS, cfg);
 
 	ltdefs = rvu->kpu.lt_def;
 	/* Calibrate X2P bus to check if CGX/LBK links are fine */
-- 
2.25.1

Re: [net PATCH] octeontx2-af: Fix NIX SQ mode and BP config

[Jacob Keller]

On 4/7/2024 10:26 PM, Geetha sowjanya wrote:
> NIX SQ mode and link backpressure configuration is required for
> all platforms. But in current driver this code is wrongly placed
> under specific platform check. This patch fixes the issue by 
> moving the code out of platform check.
> 
> Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
> Signed-off-by: Geetha sowjanya <gakula@marvell.com>

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>