From: "Rob Herring (Arm)" <robh@kernel.org>
To: Tengfei Fan <quic_tengfan@quicinc.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
linux-kernel@vger.kernel.org, kernel@quicinc.com,
Konrad Dybcio <konradybcio@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 0/4] arm64: dts: qcom: Add support for the QCS9100 SoC and board
Date: Wed, 11 Sep 2024 08:50:12 -0500 [thread overview]
Message-ID: <172606224532.90794.3646639531528428689.robh@kernel.org> (raw)
In-Reply-To: <20240911-add_qcs9100_support-v2-0-e43a71ceb017@quicinc.com>
On Wed, 11 Sep 2024 19:10:54 +0800, Tengfei Fan wrote:
> Add QCS9100 SoC ID and board device trees support.
> QCS9100 is a variant of SA8775p, and they are fully compatible with each
> other.
>
> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
> ---
> Changes in v2:
> - Add SoC binding for add QCS9100 Ride and QCS9100 Ride Rev3
> - Update SoC binding patch commit message
> - Add QCS9100 Ride and Ride Rev3 board device tree patches
> - Link to v1: https://lore.kernel.org/r/20240806-add_qcs9100_soc_id-v1-0-04d14081f304@quicinc.com
>
> ---
> Tengfei Fan (4):
> dt-bindings: arm: qcom,ids: add SoC ID for QCS9100
> soc: qcom: socinfo: add QCS9100 ID
> dt-bindings: arm: qcom: Document qcs9100-ride and qcs9100-ride Rev3
> arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards
>
> Documentation/devicetree/bindings/arm/qcom.yaml | 8 ++++++++
> arch/arm64/boot/dts/qcom/Makefile | 2 ++
> arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts | 11 +++++++++++
> arch/arm64/boot/dts/qcom/qcs9100-ride.dts | 11 +++++++++++
> drivers/soc/qcom/socinfo.c | 1 +
> include/dt-bindings/arm/qcom,ids.h | 1 +
> 6 files changed, 34 insertions(+)
> ---
> base-commit: 6708132e80a2ced620bde9b9c36e426183544a23
> change-id: 20240911-add_qcs9100_support-dbb22dd8b475
>
> Best regards,
> --
> Tengfei Fan <quic_tengfan@quicinc.com>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y qcom/qcs9100-ride-r3.dtb qcom/qcs9100-ride.dtb' for 20240911-add_qcs9100_support-v2-0-e43a71ceb017@quicinc.com:
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: usb@a4f8800: interrupt-names: ['pwr_event', 'hs_phy_irq', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: usb@a4f8800: interrupt-names: ['pwr_event', 'hs_phy_irq', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: rsc@18200000: 'power-domains' is a required property
from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: rsc@18200000: 'power-domains' is a required property
from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: ethernet@23000000: tx-queues-config: 'snps,tx-sched-sp' does not match any of the regexes: '^queue[0-9]$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: ethernet@23000000: Unevaluated properties are not allowed ('interconnect-names', 'interconnects', 'phy-handle', 'phy-mode', 'power-domains', 'rx-fifo-depth', 'rx-queues-config', 'snps,mtl-rx-config', 'snps,mtl-tx-config', 'snps,pbl', 'snps,ps-speed', 'snps,tso', 'tx-fifo-depth', 'tx-queues-config' were unexpected)
from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: ethernet@23000000: tx-queues-config: 'snps,tx-sched-sp' does not match any of the regexes: '^queue[0-9]$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: ethernet@23000000: Unevaluated properties are not allowed ('interconnect-names', 'interconnects', 'phy-handle', 'phy-mode', 'power-domains', 'rx-fifo-depth', 'rx-queues-config', 'snps,mtl-rx-config', 'snps,mtl-tx-config', 'snps,pbl', 'snps,ps-speed', 'snps,tso', 'tx-fifo-depth', 'tx-queues-config' were unexpected)
from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: ethernet@23040000: tx-queues-config: 'snps,tx-sched-sp' does not match any of the regexes: '^queue[0-9]$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: ethernet@23040000: Unevaluated properties are not allowed ('interconnect-names', 'interconnects', 'mdio', 'phy-handle', 'phy-mode', 'power-domains', 'rx-fifo-depth', 'rx-queues-config', 'snps,mtl-rx-config', 'snps,mtl-tx-config', 'snps,pbl', 'snps,ps-speed', 'snps,tso', 'tx-fifo-depth', 'tx-queues-config' were unexpected)
from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: ethernet@23040000: tx-queues-config: 'snps,tx-sched-sp' does not match any of the regexes: '^queue[0-9]$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: ethernet@23040000: Unevaluated properties are not allowed ('interconnect-names', 'interconnects', 'mdio', 'phy-handle', 'phy-mode', 'power-domains', 'rx-fifo-depth', 'rx-queues-config', 'snps,mtl-rx-config', 'snps,mtl-tx-config', 'snps,pbl', 'snps,ps-speed', 'snps,tso', 'tx-fifo-depth', 'tx-queues-config' were unexpected)
from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
next prev parent reply other threads:[~2024-09-11 13:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-11 11:10 Tengfei Fan
2024-09-11 11:10 ` [PATCH v2 1/4] dt-bindings: arm: qcom,ids: add SoC ID for QCS9100 Tengfei Fan
2024-09-11 11:10 ` [PATCH v2 2/4] soc: qcom: socinfo: add QCS9100 ID Tengfei Fan
2024-09-11 11:10 ` [PATCH v2 3/4] dt-bindings: arm: qcom: Document qcs9100-ride and qcs9100-ride Rev3 Tengfei Fan
2024-09-11 11:24 ` Konrad Dybcio
2024-09-16 15:12 ` Krzysztof Kozlowski
2024-09-11 11:10 ` [PATCH v2 4/4] arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards Tengfei Fan
2024-09-16 23:32 ` Konrad Dybcio
2025-01-08 14:55 ` Caleb Connolly
2024-09-11 13:50 ` Rob Herring (Arm) [this message]
2024-11-04 4:13 ` (subset) [PATCH v2 0/4] arm64: dts: qcom: Add support for the QCS9100 SoC and board Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=172606224532.90794.3646639531528428689.robh@kernel.org \
--to=robh@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@quicinc.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_tengfan@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®