From: Tengfei Fan <quic_tengfan@quicinc.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <kernel@quicinc.com>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Tengfei Fan <quic_tengfan@quicinc.com>
Subject: [PATCH v2 4/4] arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards
Date: Wed, 11 Sep 2024 19:10:58 +0800 [thread overview]
Message-ID: <20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com> (raw)
In-Reply-To: <20240911-add_qcs9100_support-v2-0-e43a71ceb017@quicinc.com>
Add device tree support for the QCS9100 Ride and Ride Rev3 boards. The
QCS9100 is a variant of the SA8775p, and they are fully compatible with
each other. The QCS9100 Ride/Ride Rev3 board is essentially the same as
the SA8775p Ride/Ride Rev3 board, with the QCS9100 SoC mounted instead
of the SA8775p.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
arch/arm64/boot/dts/qcom/Makefile | 2 ++
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts | 11 +++++++++++
arch/arm64/boot/dts/qcom/qcs9100-ride.dts | 11 +++++++++++
3 files changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index ae002c7cf126..b3c369305731 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -112,6 +112,8 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
new file mode 100644
index 000000000000..759d1ec694b2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "sa8775p-ride-r3.dts"
+/ {
+ model = "Qualcomm QCS9100 Ride Rev3";
+ compatible = "qcom,qcs9100-ride-r3", "qcom,qcs9100", "qcom,sa8775p";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs9100-ride.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
new file mode 100644
index 000000000000..979462dfec30
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "sa8775p-ride.dts"
+/ {
+ model = "Qualcomm QCS9100 Ride";
+ compatible = "qcom,qcs9100-ride", "qcom,qcs9100", "qcom,sa8775p";
+};
--
2.25.1
next prev parent reply other threads:[~2024-09-11 11:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-11 11:10 [PATCH v2 0/4] arm64: dts: qcom: Add support for the QCS9100 SoC and board Tengfei Fan
2024-09-11 11:10 ` [PATCH v2 1/4] dt-bindings: arm: qcom,ids: add SoC ID for QCS9100 Tengfei Fan
2024-09-11 11:10 ` [PATCH v2 2/4] soc: qcom: socinfo: add QCS9100 ID Tengfei Fan
2024-09-11 11:10 ` [PATCH v2 3/4] dt-bindings: arm: qcom: Document qcs9100-ride and qcs9100-ride Rev3 Tengfei Fan
2024-09-11 11:24 ` Konrad Dybcio
2024-09-16 15:12 ` Krzysztof Kozlowski
2024-09-11 11:10 ` Tengfei Fan [this message]
2024-09-16 23:32 ` [PATCH v2 4/4] arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards Konrad Dybcio
2025-01-08 14:55 ` Caleb Connolly
2024-09-11 13:50 ` [PATCH v2 0/4] arm64: dts: qcom: Add support for the QCS9100 SoC and board Rob Herring (Arm)
2024-11-04 4:13 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com \
--to=quic_tengfan@quicinc.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@quicinc.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®