[PATCH net-next 0/3] Fix sparse warnings in dpaa_eth driver

[PATCH net-next 0/3] Fix sparse warnings in dpaa_eth driver

[Vladimir Oltean]

This is a follow-up of the discussion at:
https://lore.kernel.org/oe-kbuild-all/20241028-sticky-refined-lionfish-b06c0c@leitao/
where I said I would take care of the sparse warnings uncovered by
Breno's COMPILE_TEST change for the dpaa_eth driver.

There was one warning that I decided to treat as an actual bug:
https://lore.kernel.org/netdev/20241029163105.44135-1-vladimir.oltean@nxp.com/
and what remains here are those warnings which I consider harmless.

I would like Christophe to ack the entire series to be taken through
netdev. I find it weird that the qbman driver, whose major API consumer
is netdev, is maintained by a different group. In this case, the buggy
qm_sg_entry_get_off() function is defined in qbman but exclusively
called in netdev.

Vladimir Oltean (3):
  soc: fsl_qbman: use be16_to_cpu() in qm_sg_entry_get_off()
  net: dpaa_eth: add assertions about SGT entry offsets in
    sg_fd_to_skb()
  net: dpaa_eth: extract hash using __be32 pointer in rx_default_dqrr()

 .../net/ethernet/freescale/dpaa/dpaa_eth.c    | 26 ++++++++++++-------
 include/soc/fsl/qman.h                        |  2 +-
 2 files changed, 17 insertions(+), 11 deletions(-)

-- 
2.34.1

[PATCH net-next 1/3] soc: fsl_qbman: use be16_to_cpu() in qm_sg_entry_get_off()

[Vladimir Oltean]

struct qm_sg_entry :: offset is a 13-bit field, declared as __be16.

When using be32_to_cpu(), a wrong value will be calculated on little
endian systems (Arm), because type promotion from 16-bit to 32-bit,
which is done before the byte swap and always in the CPU native
endianness, changes the value of the scatter/gather list entry offset in
big-endian interpretation (adds two zero bytes in the LSB interpretation).
The result of the byte swap is ANDed with GENMASK(12, 0), so the result
is always zero, because only those bytes added by type promotion remain
after the application of the bit mask.

The impact of the bug is that scatter/gather frames with a non-zero
offset into the buffer are treated by the driver as if they had a zero
offset. This is all in theory, because in practice, qm_sg_entry_get_off()
has a single caller, where the bug is inconsequential, because at that
call site the buffer offset will always be zero, as will be explained in
the subsequent change.

Flagged by sparse:

warning: cast to restricted __be32
warning: cast from restricted __be16

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 include/soc/fsl/qman.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/soc/fsl/qman.h b/include/soc/fsl/qman.h
index 0d3d6beb7fdb..7f7a4932d7f1 100644
--- a/include/soc/fsl/qman.h
+++ b/include/soc/fsl/qman.h
@@ -242,7 +242,7 @@ static inline void qm_sg_entry_set_f(struct qm_sg_entry *sg, int len)
 
 static inline int qm_sg_entry_get_off(const struct qm_sg_entry *sg)
 {
-	return be32_to_cpu(sg->offset) & QM_SG_OFF_MASK;
+	return be16_to_cpu(sg->offset) & QM_SG_OFF_MASK;
 }
 
 /* "Frame Dequeue Response" */
-- 
2.34.1

Re: [PATCH net-next 1/3] soc: fsl_qbman: use be16_to_cpu() in qm_sg_entry_get_off()

[Breno Leitao]

On Tue, Oct 29, 2024 at 06:43:15PM +0200, Vladimir Oltean wrote:
> struct qm_sg_entry :: offset is a 13-bit field, declared as __be16.
> 
> When using be32_to_cpu(), a wrong value will be calculated on little
> endian systems (Arm), because type promotion from 16-bit to 32-bit,
> which is done before the byte swap and always in the CPU native
> endianness, changes the value of the scatter/gather list entry offset in
> big-endian interpretation (adds two zero bytes in the LSB interpretation).
> The result of the byte swap is ANDed with GENMASK(12, 0), so the result
> is always zero, because only those bytes added by type promotion remain
> after the application of the bit mask.
> 
> The impact of the bug is that scatter/gather frames with a non-zero
> offset into the buffer are treated by the driver as if they had a zero
> offset. This is all in theory, because in practice, qm_sg_entry_get_off()
> has a single caller, where the bug is inconsequential, because at that
> call site the buffer offset will always be zero, as will be explained in
> the subsequent change.
> 
> Flagged by sparse:
> 
> warning: cast to restricted __be32
> warning: cast from restricted __be16
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>

Reviewed-by: Breno Leitao <leitao@debian.org>

Re: [PATCH net-next 1/3] soc: fsl_qbman: use be16_to_cpu() in qm_sg_entry_get_off()

[Christophe Leroy]

Le 29/10/2024 à 17:43, Vladimir Oltean a écrit :
> struct qm_sg_entry :: offset is a 13-bit field, declared as __be16.
> 
> When using be32_to_cpu(), a wrong value will be calculated on little
> endian systems (Arm), because type promotion from 16-bit to 32-bit,
> which is done before the byte swap and always in the CPU native
> endianness, changes the value of the scatter/gather list entry offset in
> big-endian interpretation (adds two zero bytes in the LSB interpretation).
> The result of the byte swap is ANDed with GENMASK(12, 0), so the result
> is always zero, because only those bytes added by type promotion remain
> after the application of the bit mask.
> 
> The impact of the bug is that scatter/gather frames with a non-zero
> offset into the buffer are treated by the driver as if they had a zero
> offset. This is all in theory, because in practice, qm_sg_entry_get_off()
> has a single caller, where the bug is inconsequential, because at that
> call site the buffer offset will always be zero, as will be explained in
> the subsequent change.
> 
> Flagged by sparse:
> 
> warning: cast to restricted __be32
> warning: cast from restricted __be16
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>

Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>

> ---
>   include/soc/fsl/qman.h | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/include/soc/fsl/qman.h b/include/soc/fsl/qman.h
> index 0d3d6beb7fdb..7f7a4932d7f1 100644
> --- a/include/soc/fsl/qman.h
> +++ b/include/soc/fsl/qman.h
> @@ -242,7 +242,7 @@ static inline void qm_sg_entry_set_f(struct qm_sg_entry *sg, int len)
>   
>   static inline int qm_sg_entry_get_off(const struct qm_sg_entry *sg)
>   {
> -	return be32_to_cpu(sg->offset) & QM_SG_OFF_MASK;
> +	return be16_to_cpu(sg->offset) & QM_SG_OFF_MASK;
>   }
>   
>   /* "Frame Dequeue Response" */

[PATCH net-next 2/3] net: dpaa_eth: add assertions about SGT entry offsets in sg_fd_to_skb()

[Vladimir Oltean]

Multi-buffer frame descriptors (FDs) point to a buffer holding a
scatter/gather table (SGT), which is a finite array of fixed-size
entries, the last of which has qm_sg_entry_is_final(&sgt[i]) == true.

Each SGT entry points to a buffer holding pieces of the frame.
DPAARM.pdf explains in the figure called "Internal and External Margins,
Scatter/Gather Frame Format" that the SGT table is located within its
buffer at the same offset as the frame data start is located within the
first packet buffer.

                                 +------------------------+
    Scatter/Gather Buffer        |        First Buffer    |   Last Buffer
      ^ +------------+ ^       +-|---->^ +------------+   +->+------------+
      | |            | | ICEOF | |     | |            |      |////////////|
      | +------------+ v       | |     | |            |      |////////////|
 BSM  | |/ part of //|         | |BSM  | |            |      |////////////|
      | |/ Internal /|         | |     | |            |      |////////////|
      | |/ Context //|         | |     | |            |      |// Frame ///|
      | +------------+         | |     | |            | ...  |/ content //|
      | |            |         | |     | |            |      |////////////|
      | |            |         | |     | |            |      |////////////|
      v +------------+         | |     v +------------+      |////////////|
        | Scatter/ //| sgt[0]--+ |       |// Frame ///|      |////////////|
        | Gather List| ...       |       |/ content //|      +------------+ ^
        |////////////| sgt[N]----+       |////////////|      |            | | BEM
        |////////////|                   |////////////|      |            | |
        +------------+                   +------------+      +------------+ v

BSM = Buffer Start Margin, BEM = Buffer End Margin, both are configured
by dpaa_eth_init_rx_port() for the RX FMan port relevant here.

sg_fd_to_skb() runs in the calling context of rx_default_dqrr() -
the NAPI receive callback - which only expects to receive contiguous
(qm_fd_contig) or scatter/gather (qm_fd_sg) frame descriptors.
Everything else is irrelevant codewise.

The processing done by sg_fd_to_skb() is weird because it does not
conform to the expectations laid out by the aforementioned figure.
Namely, it parses the OFFSET field only for SGT entries with i != 0
(codewise, skb != NULL). In those cases, OFFSET should always be 0.
Also, it does not parse the OFFSET field for the sgt[0] case, the only
case where the buffer offset is meaningful in this context. There, it
uses the fd_off, aka the offset to the Scatter/Gather List in the
Scatter/Gather Buffer from the figure. By equivalence, they should both
be equal to the BSM (in turn, equal to priv->rx_headroom).

This can actually be explained due to the bug which we had in
qm_sg_entry_get_off() until the previous change:

- qm_sg_entry_get_off() did not actually _work_ for sgt[0]. It returned
  zero even with a non-zero offset, so fd_off had to be used as a fill-in.

- qm_sg_entry_get_off() always returned zero for sgt[i>0], and that
  resulted in no user-visible bug, because the buffer offset _was
  supposed_ to be zero for those buffers. So remove it from calculations.

Add assertions about the OFFSET field in both cases (first or subsequent
SGT entries) to make it absolutely obvious when something is not well
handled.

Similar logic can be seen in the driver for the architecturally similar
DPAA2, where dpaa2_eth_build_frag_skb() calls dpaa2_sg_get_offset() only
for i == 0. For the rest, there is even a comment stating the same thing:

	 * Data in subsequent SG entries is stored from the
	 * beginning of the buffer, so we don't need to add the
	 * sg_offset.

Tested on LS1046A.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 .../net/ethernet/freescale/dpaa/dpaa_eth.c    | 24 ++++++++++++-------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index ac06b01fe934..e280013afa63 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -1820,7 +1820,6 @@ static struct sk_buff *sg_fd_to_skb(const struct dpaa_priv *priv,
 	struct page *page, *head_page;
 	struct dpaa_bp *dpaa_bp;
 	void *vaddr, *sg_vaddr;
-	int frag_off, frag_len;
 	struct sk_buff *skb;
 	dma_addr_t sg_addr;
 	int page_offset;
@@ -1863,6 +1862,11 @@ static struct sk_buff *sg_fd_to_skb(const struct dpaa_priv *priv,
 			 * on Tx, if extra headers are added.
 			 */
 			WARN_ON(fd_off != priv->rx_headroom);
+			/* The offset to data start within the buffer holding
+			 * the SGT should always be equal to the offset to data
+			 * start within the first buffer holding the frame.
+			 */
+			WARN_ON_ONCE(fd_off != qm_sg_entry_get_off(&sgt[i]));
 			skb_reserve(skb, fd_off);
 			skb_put(skb, qm_sg_entry_get_len(&sgt[i]));
 		} else {
@@ -1876,21 +1880,23 @@ static struct sk_buff *sg_fd_to_skb(const struct dpaa_priv *priv,
 			page = virt_to_page(sg_vaddr);
 			head_page = virt_to_head_page(sg_vaddr);
 
-			/* Compute offset in (possibly tail) page */
+			/* Compute offset of sg_vaddr in (possibly tail) page */
 			page_offset = ((unsigned long)sg_vaddr &
 					(PAGE_SIZE - 1)) +
 				(page_address(page) - page_address(head_page));
-			/* page_offset only refers to the beginning of sgt[i];
-			 * but the buffer itself may have an internal offset.
+
+			/* Non-initial SGT entries should not have a buffer
+			 * offset.
 			 */
-			frag_off = qm_sg_entry_get_off(&sgt[i]) + page_offset;
-			frag_len = qm_sg_entry_get_len(&sgt[i]);
+			WARN_ON_ONCE(qm_sg_entry_get_off(&sgt[i]));
+
 			/* skb_add_rx_frag() does no checking on the page; if
 			 * we pass it a tail page, we'll end up with
-			 * bad page accounting and eventually with segafults.
+			 * bad page accounting and eventually with segfaults.
 			 */
-			skb_add_rx_frag(skb, i - 1, head_page, frag_off,
-					frag_len, dpaa_bp->size);
+			skb_add_rx_frag(skb, i - 1, head_page, page_offset,
+					qm_sg_entry_get_len(&sgt[i]),
+					dpaa_bp->size);
 		}
 
 		/* Update the pool count for the current {cpu x bpool} */
-- 
2.34.1

Re: [PATCH net-next 2/3] net: dpaa_eth: add assertions about SGT entry offsets in sg_fd_to_skb()

[Vladimir Oltean]

On Tue, Oct 29, 2024 at 06:43:16PM +0200, Vladimir Oltean wrote:
> Tested on LS1046A.

..and now also tested on T2080 (PowerPC), no apparent regressions.

Re: [PATCH net-next 2/3] net: dpaa_eth: add assertions about SGT entry offsets in sg_fd_to_skb()

[Christophe Leroy]

Le 29/10/2024 à 17:43, Vladimir Oltean a écrit :
> Multi-buffer frame descriptors (FDs) point to a buffer holding a
> scatter/gather table (SGT), which is a finite array of fixed-size
> entries, the last of which has qm_sg_entry_is_final(&sgt[i]) == true.
> 
> Each SGT entry points to a buffer holding pieces of the frame.
> DPAARM.pdf explains in the figure called "Internal and External Margins,
> Scatter/Gather Frame Format" that the SGT table is located within its
> buffer at the same offset as the frame data start is located within the
> first packet buffer.
> 
>                                   +------------------------+
>      Scatter/Gather Buffer        |        First Buffer    |   Last Buffer
>        ^ +------------+ ^       +-|---->^ +------------+   +->+------------+
>        | |            | | ICEOF | |     | |            |      |////////////|
>        | +------------+ v       | |     | |            |      |////////////|
>   BSM  | |/ part of //|         | |BSM  | |            |      |////////////|
>        | |/ Internal /|         | |     | |            |      |////////////|
>        | |/ Context //|         | |     | |            |      |// Frame ///|
>        | +------------+         | |     | |            | ...  |/ content //|
>        | |            |         | |     | |            |      |////////////|
>        | |            |         | |     | |            |      |////////////|
>        v +------------+         | |     v +------------+      |////////////|
>          | Scatter/ //| sgt[0]--+ |       |// Frame ///|      |////////////|
>          | Gather List| ...       |       |/ content //|      +------------+ ^
>          |////////////| sgt[N]----+       |////////////|      |            | | BEM
>          |////////////|                   |////////////|      |            | |
>          +------------+                   +------------+      +------------+ v
> 
> BSM = Buffer Start Margin, BEM = Buffer End Margin, both are configured
> by dpaa_eth_init_rx_port() for the RX FMan port relevant here.
> 
> sg_fd_to_skb() runs in the calling context of rx_default_dqrr() -
> the NAPI receive callback - which only expects to receive contiguous
> (qm_fd_contig) or scatter/gather (qm_fd_sg) frame descriptors.
> Everything else is irrelevant codewise.
> 
> The processing done by sg_fd_to_skb() is weird because it does not
> conform to the expectations laid out by the aforementioned figure.
> Namely, it parses the OFFSET field only for SGT entries with i != 0
> (codewise, skb != NULL). In those cases, OFFSET should always be 0.
> Also, it does not parse the OFFSET field for the sgt[0] case, the only
> case where the buffer offset is meaningful in this context. There, it
> uses the fd_off, aka the offset to the Scatter/Gather List in the
> Scatter/Gather Buffer from the figure. By equivalence, they should both
> be equal to the BSM (in turn, equal to priv->rx_headroom).
> 
> This can actually be explained due to the bug which we had in
> qm_sg_entry_get_off() until the previous change:
> 
> - qm_sg_entry_get_off() did not actually _work_ for sgt[0]. It returned
>    zero even with a non-zero offset, so fd_off had to be used as a fill-in.
> 
> - qm_sg_entry_get_off() always returned zero for sgt[i>0], and that
>    resulted in no user-visible bug, because the buffer offset _was
>    supposed_ to be zero for those buffers. So remove it from calculations.
> 
> Add assertions about the OFFSET field in both cases (first or subsequent
> SGT entries) to make it absolutely obvious when something is not well
> handled.
> 
> Similar logic can be seen in the driver for the architecturally similar
> DPAA2, where dpaa2_eth_build_frag_skb() calls dpaa2_sg_get_offset() only
> for i == 0. For the rest, there is even a comment stating the same thing:
> 
> 	 * Data in subsequent SG entries is stored from the
> 	 * beginning of the buffer, so we don't need to add the
> 	 * sg_offset.
> 
> Tested on LS1046A.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>


Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>


> ---
>   .../net/ethernet/freescale/dpaa/dpaa_eth.c    | 24 ++++++++++++-------
>   1 file changed, 15 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> index ac06b01fe934..e280013afa63 100644
> --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> @@ -1820,7 +1820,6 @@ static struct sk_buff *sg_fd_to_skb(const struct dpaa_priv *priv,
>   	struct page *page, *head_page;
>   	struct dpaa_bp *dpaa_bp;
>   	void *vaddr, *sg_vaddr;
> -	int frag_off, frag_len;
>   	struct sk_buff *skb;
>   	dma_addr_t sg_addr;
>   	int page_offset;
> @@ -1863,6 +1862,11 @@ static struct sk_buff *sg_fd_to_skb(const struct dpaa_priv *priv,
>   			 * on Tx, if extra headers are added.
>   			 */
>   			WARN_ON(fd_off != priv->rx_headroom);
> +			/* The offset to data start within the buffer holding
> +			 * the SGT should always be equal to the offset to data
> +			 * start within the first buffer holding the frame.
> +			 */
> +			WARN_ON_ONCE(fd_off != qm_sg_entry_get_off(&sgt[i]));
>   			skb_reserve(skb, fd_off);
>   			skb_put(skb, qm_sg_entry_get_len(&sgt[i]));
>   		} else {
> @@ -1876,21 +1880,23 @@ static struct sk_buff *sg_fd_to_skb(const struct dpaa_priv *priv,
>   			page = virt_to_page(sg_vaddr);
>   			head_page = virt_to_head_page(sg_vaddr);
>   
> -			/* Compute offset in (possibly tail) page */
> +			/* Compute offset of sg_vaddr in (possibly tail) page */
>   			page_offset = ((unsigned long)sg_vaddr &
>   					(PAGE_SIZE - 1)) +
>   				(page_address(page) - page_address(head_page));
> -			/* page_offset only refers to the beginning of sgt[i];
> -			 * but the buffer itself may have an internal offset.
> +
> +			/* Non-initial SGT entries should not have a buffer
> +			 * offset.
>   			 */
> -			frag_off = qm_sg_entry_get_off(&sgt[i]) + page_offset;
> -			frag_len = qm_sg_entry_get_len(&sgt[i]);
> +			WARN_ON_ONCE(qm_sg_entry_get_off(&sgt[i]));
> +
>   			/* skb_add_rx_frag() does no checking on the page; if
>   			 * we pass it a tail page, we'll end up with
> -			 * bad page accounting and eventually with segafults.
> +			 * bad page accounting and eventually with segfaults.
>   			 */
> -			skb_add_rx_frag(skb, i - 1, head_page, frag_off,
> -					frag_len, dpaa_bp->size);
> +			skb_add_rx_frag(skb, i - 1, head_page, page_offset,
> +					qm_sg_entry_get_len(&sgt[i]),
> +					dpaa_bp->size);
>   		}
>   
>   		/* Update the pool count for the current {cpu x bpool} */

[PATCH net-next 3/3] net: dpaa_eth: extract hash using __be32 pointer in rx_default_dqrr()

[Vladimir Oltean]

Sparse provides the following output:

warning: cast to restricted __be32

This is a harmless warning due to the fact that we dereference the hash
stored in the FD using an incorrect type annotation. Suppress the
warning by using the correct __be32 type instead of u32. No functional
change.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index e280013afa63..bf5baef5c3e0 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2772,7 +2772,7 @@ static enum qman_cb_dqrr_result rx_default_dqrr(struct qman_portal *portal,
 	if (net_dev->features & NETIF_F_RXHASH && priv->keygen_in_use &&
 	    !fman_port_get_hash_result_offset(priv->mac_dev->port[RX],
 					      &hash_offset)) {
-		hash = be32_to_cpu(*(u32 *)(vaddr + hash_offset));
+		hash = be32_to_cpu(*(__be32 *)(vaddr + hash_offset));
 		hash_valid = true;
 	}
 
-- 
2.34.1

Re: [PATCH net-next 3/3] net: dpaa_eth: extract hash using __be32 pointer in rx_default_dqrr()

[Breno Leitao]

On Tue, Oct 29, 2024 at 06:43:17PM +0200, Vladimir Oltean wrote:
> Sparse provides the following output:
> 
> warning: cast to restricted __be32
> 
> This is a harmless warning due to the fact that we dereference the hash
> stored in the FD using an incorrect type annotation. Suppress the
> warning by using the correct __be32 type instead of u32. No functional
> change.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>

Reviewed-by: Breno Leitao <leitao@debian.org>

Re: [PATCH net-next 3/3] net: dpaa_eth: extract hash using __be32 pointer in rx_default_dqrr()

[Christophe Leroy]

Le 29/10/2024 à 17:43, Vladimir Oltean a écrit :
> Sparse provides the following output:
> 
> warning: cast to restricted __be32
> 
> This is a harmless warning due to the fact that we dereference the hash
> stored in the FD using an incorrect type annotation. Suppress the
> warning by using the correct __be32 type instead of u32. No functional
> change.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>

Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>

> ---
>   drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> index e280013afa63..bf5baef5c3e0 100644
> --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
> @@ -2772,7 +2772,7 @@ static enum qman_cb_dqrr_result rx_default_dqrr(struct qman_portal *portal,
>   	if (net_dev->features & NETIF_F_RXHASH && priv->keygen_in_use &&
>   	    !fman_port_get_hash_result_offset(priv->mac_dev->port[RX],
>   					      &hash_offset)) {
> -		hash = be32_to_cpu(*(u32 *)(vaddr + hash_offset));
> +		hash = be32_to_cpu(*(__be32 *)(vaddr + hash_offset));
>   		hash_valid = true;
>   	}
>   

RE: [PATCH net-next 0/3] Fix sparse warnings in dpaa_eth driver

[Madalin Bucur (OSS)]

> -----Original Message-----
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
> Sent: Tuesday, October 29, 2024 6:43 PM
> To: netdev@vger.kernel.org
> Cc: David S. Miller <davem@davemloft.net>; Eric Dumazet
> <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo Abeni
> <pabeni@redhat.com>; Breno Leitao <leitao@debian.org>; Madalin Bucur
> <madalin.bucur@nxp.com>; Ioana Ciornei <ioana.ciornei@nxp.com>; Radu-
> Andrei Bulie <radu-andrei.bulie@nxp.com>; Christophe Leroy
> <christophe.leroy@csgroup.eu>; Sean Anderson <sean.anderson@linux.dev>;
> linux-kernel@vger.kernel.org; linuxppc-dev@lists.ozlabs.org; linux-arm-
> kernel@lists.infradead.org
> Subject: [PATCH net-next 0/3] Fix sparse warnings in dpaa_eth driver
> 
> This is a follow-up of the discussion at:
> https://lore.kernel.org/oe-kbuild-all/20241028-sticky-refined-lionfish-
> b06c0c@leitao/
> where I said I would take care of the sparse warnings uncovered by
> Breno's COMPILE_TEST change for the dpaa_eth driver.
> 
> There was one warning that I decided to treat as an actual bug:
> https://lore.kernel.org/netdev/20241029163105.44135-1-
> vladimir.oltean@nxp.com/
> and what remains here are those warnings which I consider harmless.
> 
> I would like Christophe to ack the entire series to be taken through
> netdev. I find it weird that the qbman driver, whose major API consumer
> is netdev, is maintained by a different group. In this case, the buggy
> qm_sg_entry_get_off() function is defined in qbman but exclusively
> called in netdev.
> 
> Vladimir Oltean (3):
>   soc: fsl_qbman: use be16_to_cpu() in qm_sg_entry_get_off()
>   net: dpaa_eth: add assertions about SGT entry offsets in
>     sg_fd_to_skb()
>   net: dpaa_eth: extract hash using __be32 pointer in rx_default_dqrr()
> 
>  .../net/ethernet/freescale/dpaa/dpaa_eth.c    | 26 ++++++++++++-------
>  include/soc/fsl/qman.h                        |  2 +-
>  2 files changed, 17 insertions(+), 11 deletions(-)
> 
> --
> 2.34.1

For the series,

Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>

Thank you!

Re: [PATCH net-next 0/3] Fix sparse warnings in dpaa_eth driver

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Tue, 29 Oct 2024 18:43:14 +0200 you wrote:
> This is a follow-up of the discussion at:
> https://lore.kernel.org/oe-kbuild-all/20241028-sticky-refined-lionfish-b06c0c@leitao/
> where I said I would take care of the sparse warnings uncovered by
> Breno's COMPILE_TEST change for the dpaa_eth driver.
> 
> There was one warning that I decided to treat as an actual bug:
> https://lore.kernel.org/netdev/20241029163105.44135-1-vladimir.oltean@nxp.com/
> and what remains here are those warnings which I consider harmless.
> 
> [...]

Here is the summary with links:
  - [net-next,1/3] soc: fsl_qbman: use be16_to_cpu() in qm_sg_entry_get_off()
    https://git.kernel.org/netdev/net-next/c/a12fcef429e1
  - [net-next,2/3] net: dpaa_eth: add assertions about SGT entry offsets in sg_fd_to_skb()
    https://git.kernel.org/netdev/net-next/c/81f8ee2823f3
  - [net-next,3/3] net: dpaa_eth: extract hash using __be32 pointer in rx_default_dqrr()
    https://git.kernel.org/netdev/net-next/c/0a746cf8bb6d

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html