[PATCH can-next v5 0/2] can: tcan4x5x: add option for selecting nWKRQ voltage

[PATCH can-next v5 0/2] can: tcan4x5x: add option for selecting nWKRQ voltage

[Sean Nyekjaer]

This series adds support for setting the nWKRQ voltage.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
---
Changes in v5:
- Assign bool directly from of_property_read_bool.
- Added Reviewed-By tag to 2/2
- Link to v4: https://lore.kernel.org/r/20241114-tcan-wkrqv-v4-0-f22589d67fb1@geanix.com

Changes in v4:
- Fixed commit msg, as pr. Marc's comments
- Added Reviewed-By tag to 2/2
- Link to v3: https://lore.kernel.org/r/20241112-tcan-wkrqv-v3-0-c66423fba26d@geanix.com

Changes in v3:
- Switched the order of patches, yaml patch first and then code change.
- Switched to a boolean ti,nwkrq-voltage-vio.
- Switched internal variable to a bool.
- Link to v2: https://lore.kernel.org/r/20241111-tcan-wkrqv-v2-0-9763519b5252@geanix.com

Changes in v2:
- Converted tcan4x5x.txt to DT schema. In
  https://lore.kernel.org/linux-can/20241105-convert-tcan-v2-1-4b320f3fcf99@geanix.com/
- Reworked ti,nwkrq-voltage-sel, to DH schema style.
- Link to v1: https://lore.kernel.org/r/20241031-tcan-wkrqv-v1-0-823dbd12fe4a@geanix.com

---
Sean Nyekjaer (2):
      dt-bindings: can: tcan4x5x: Document the ti,nwkrq-voltage-vio option
      can: tcan4x5x: add option for selecting nWKRQ voltage

 .../devicetree/bindings/net/can/ti,tcan4x5x.yaml     |  8 ++++++++
 drivers/net/can/m_can/tcan4x5x-core.c                | 20 ++++++++++++++++++++
 drivers/net/can/m_can/tcan4x5x.h                     |  2 ++
 3 files changed, 30 insertions(+)
---
base-commit: 2b2a9a08f8f0b904ea2bc61db3374421b0f944a6
change-id: 20241030-tcan-wkrqv-c62b906005da
prerequisite-change-id: 20241105-convert-tcan-4b516424ecf6:v2
prerequisite-patch-id: a652b1a16dadd5ff525d0b58fec56f605a976aa3

Best regards,
-- 
Sean Nyekjaer <sean@geanix.com>

[PATCH can-next v5 1/2] dt-bindings: can: tcan4x5x: Document the ti,nwkrq-voltage-vio option

[Sean Nyekjaer]

The nWKRQ pin supports an output voltage of either the internal reference
voltage (3.6V) or the reference voltage of
the digital interface 0-6V (VIO).
Add the devicetree option ti,nwkrq-voltage-vio to set it to VIO.

If this property is omitted the reset default, the internal reference
voltage, is used.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
---
 Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml b/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml
index f1d18a5461e05296998ae9bf09bdfa1226580131..ff18cf7393550d1b7107b1233d8302203026579d 100644
--- a/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml
+++ b/Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml
@@ -106,6 +106,13 @@ properties:
       Must be half or less of "clocks" frequency.
     maximum: 18000000
 
+  ti,nwkrq-voltage-vio:
+    type: boolean
+    description:
+      nWKRQ Pin GPO buffer voltage configuration.
+      Set nWKRQ to use VIO voltage rail.
+      When not set nWKRQ will use internal voltage rail.
+
   wakeup-source:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -157,6 +164,7 @@ examples:
             device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
             device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
             reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+            ti,nwkrq-voltage-vio;
             wakeup-source;
         };
     };

-- 
2.46.2

Re: [PATCH can-next v5 1/2] dt-bindings: can: tcan4x5x: Document the ti,nwkrq-voltage-vio option

[Rob Herring (Arm)]

On Thu, 14 Nov 2024 10:14:49 +0100, Sean Nyekjaer wrote:
> The nWKRQ pin supports an output voltage of either the internal reference
> voltage (3.6V) or the reference voltage of
> the digital interface 0-6V (VIO).
> Add the devicetree option ti,nwkrq-voltage-vio to set it to VIO.
> 
> If this property is omitted the reset default, the internal reference
> voltage, is used.
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> ---
>  Documentation/devicetree/bindings/net/can/ti,tcan4x5x.yaml | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH can-next v5 2/2] can: tcan4x5x: add option for selecting nWKRQ voltage

[Sean Nyekjaer]

The nWKRQ pin supports an output voltage of either the internal reference
voltage (3.6V) or the reference voltage of
the digital interface 0-6V (VIO).
Add the devicetree option ti,nwkrq-voltage-vio to set it to VIO.

If this property is omitted the reset default, the internal reference
voltage, is used.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
---
 drivers/net/can/m_can/tcan4x5x-core.c | 20 ++++++++++++++++++++
 drivers/net/can/m_can/tcan4x5x.h      |  2 ++
 2 files changed, 22 insertions(+)

diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
index 2f73bf3abad889c222f15c39a3d43de1a1cf5fbb..7213d9894c82d079bf92f1ec62d4eebb500cdfa4 100644
--- a/drivers/net/can/m_can/tcan4x5x-core.c
+++ b/drivers/net/can/m_can/tcan4x5x-core.c
@@ -92,6 +92,8 @@
 #define TCAN4X5X_MODE_STANDBY BIT(6)
 #define TCAN4X5X_MODE_NORMAL BIT(7)
 
+#define TCAN4X5X_NWKRQ_VOLTAGE_VIO BIT(19)
+
 #define TCAN4X5X_DISABLE_WAKE_MSK	(BIT(31) | BIT(30))
 #define TCAN4X5X_DISABLE_INH_MSK	BIT(9)
 
@@ -267,6 +269,13 @@ static int tcan4x5x_init(struct m_can_classdev *cdev)
 	if (ret)
 		return ret;
 
+	if (tcan4x5x->nwkrq_voltage_vio) {
+		ret = regmap_set_bits(tcan4x5x->regmap, TCAN4X5X_CONFIG,
+				      TCAN4X5X_NWKRQ_VOLTAGE_VIO);
+		if (ret)
+			return ret;
+	}
+
 	return ret;
 }
 
@@ -318,6 +327,15 @@ static const struct tcan4x5x_version_info
 	return &tcan4x5x_versions[TCAN4X5X];
 }
 
+static void tcan4x5x_get_dt_data(struct m_can_classdev *cdev)
+{
+	struct tcan4x5x_priv *tcan4x5x = cdev_to_priv(cdev);
+	struct device_node *np = cdev->dev->of_node;
+
+	tcan4x5x->nwkrq_voltage_vio =
+		of_property_read_bool(cdev->dev->of_node, "ti,nwkrq-voltage-vio");
+}
+
 static int tcan4x5x_get_gpios(struct m_can_classdev *cdev,
 			      const struct tcan4x5x_version_info *version_info)
 {
@@ -453,6 +471,8 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
 		goto out_power;
 	}
 
+	tcan4x5x_get_dt_data(mcan_class);
+
 	tcan4x5x_check_wake(priv);
 
 	ret = tcan4x5x_write_tcan_reg(mcan_class, TCAN4X5X_INT_EN, 0);
diff --git a/drivers/net/can/m_can/tcan4x5x.h b/drivers/net/can/m_can/tcan4x5x.h
index e62c030d3e1e5a713c997e7c8ecad4a44aff4e6a..203399d5e8ccf3fd7a26b54d8356fca9d398524c 100644
--- a/drivers/net/can/m_can/tcan4x5x.h
+++ b/drivers/net/can/m_can/tcan4x5x.h
@@ -42,6 +42,8 @@ struct tcan4x5x_priv {
 
 	struct tcan4x5x_map_buf map_buf_rx;
 	struct tcan4x5x_map_buf map_buf_tx;
+
+	bool nwkrq_voltage_vio;
 };
 
 static inline void

-- 
2.46.2

Re: [PATCH can-next v5 2/2] can: tcan4x5x: add option for selecting nWKRQ voltage

[Sean Nyekjaer]

Hi Marc,

On Thu, Nov 14, 2024 at 10:14:50AM +0100, Sean Nyekjaer wrote:
> The nWKRQ pin supports an output voltage of either the internal reference
> voltage (3.6V) or the reference voltage of
> the digital interface 0-6V (VIO).
> Add the devicetree option ti,nwkrq-voltage-vio to set it to VIO.
> 
> If this property is omitted the reset default, the internal reference
> voltage, is used.
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
> ---
>  drivers/net/can/m_can/tcan4x5x-core.c | 20 ++++++++++++++++++++
>  drivers/net/can/m_can/tcan4x5x.h      |  2 ++
>  2 files changed, 22 insertions(+)
> 
> diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
> index 2f73bf3abad889c222f15c39a3d43de1a1cf5fbb..7213d9894c82d079bf92f1ec62d4eebb500cdfa4 100644
> --- a/drivers/net/can/m_can/tcan4x5x-core.c
> +++ b/drivers/net/can/m_can/tcan4x5x-core.c
> @@ -92,6 +92,8 @@
>  #define TCAN4X5X_MODE_STANDBY BIT(6)
>  #define TCAN4X5X_MODE_NORMAL BIT(7)
>  
> +#define TCAN4X5X_NWKRQ_VOLTAGE_VIO BIT(19)
> +
>  #define TCAN4X5X_DISABLE_WAKE_MSK	(BIT(31) | BIT(30))
>  #define TCAN4X5X_DISABLE_INH_MSK	BIT(9)
>  
> @@ -267,6 +269,13 @@ static int tcan4x5x_init(struct m_can_classdev *cdev)
>  	if (ret)
>  		return ret;
>  
> +	if (tcan4x5x->nwkrq_voltage_vio) {
> +		ret = regmap_set_bits(tcan4x5x->regmap, TCAN4X5X_CONFIG,
> +				      TCAN4X5X_NWKRQ_VOLTAGE_VIO);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	return ret;
>  }
>  
> @@ -318,6 +327,15 @@ static const struct tcan4x5x_version_info
>  	return &tcan4x5x_versions[TCAN4X5X];
>  }
>  
> +static void tcan4x5x_get_dt_data(struct m_can_classdev *cdev)
> +{
> +	struct tcan4x5x_priv *tcan4x5x = cdev_to_priv(cdev);
> +	struct device_node *np = cdev->dev->of_node;

Guess we can remove this line. Sorry

> +
> +	tcan4x5x->nwkrq_voltage_vio =
> +		of_property_read_bool(cdev->dev->of_node, "ti,nwkrq-voltage-vio");
> +}
> +
>  static int tcan4x5x_get_gpios(struct m_can_classdev *cdev,
>  			      const struct tcan4x5x_version_info *version_info)
>  {
> @@ -453,6 +471,8 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
>  		goto out_power;
>  	}
>  
> +	tcan4x5x_get_dt_data(mcan_class);
> +
>  	tcan4x5x_check_wake(priv);
>  
>  	ret = tcan4x5x_write_tcan_reg(mcan_class, TCAN4X5X_INT_EN, 0);
> diff --git a/drivers/net/can/m_can/tcan4x5x.h b/drivers/net/can/m_can/tcan4x5x.h
> index e62c030d3e1e5a713c997e7c8ecad4a44aff4e6a..203399d5e8ccf3fd7a26b54d8356fca9d398524c 100644
> --- a/drivers/net/can/m_can/tcan4x5x.h
> +++ b/drivers/net/can/m_can/tcan4x5x.h
> @@ -42,6 +42,8 @@ struct tcan4x5x_priv {
>  
>  	struct tcan4x5x_map_buf map_buf_rx;
>  	struct tcan4x5x_map_buf map_buf_tx;
> +
> +	bool nwkrq_voltage_vio;
>  };
>  
>  static inline void
> 
> -- 
> 2.46.2
> 

/Sean

Re: [PATCH can-next v5 2/2] can: tcan4x5x: add option for selecting nWKRQ voltage

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 2425 bytes --]

On 18.11.2024 16:05:42, Sean Nyekjaer wrote:
> Hi Marc,
> 
> On Thu, Nov 14, 2024 at 10:14:50AM +0100, Sean Nyekjaer wrote:
> > The nWKRQ pin supports an output voltage of either the internal reference
> > voltage (3.6V) or the reference voltage of
> > the digital interface 0-6V (VIO).
> > Add the devicetree option ti,nwkrq-voltage-vio to set it to VIO.
> > 
> > If this property is omitted the reset default, the internal reference
> > voltage, is used.
> > 
> > Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> > Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
> > Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
> > ---
> >  drivers/net/can/m_can/tcan4x5x-core.c | 20 ++++++++++++++++++++
> >  drivers/net/can/m_can/tcan4x5x.h      |  2 ++
> >  2 files changed, 22 insertions(+)
> > 
> > diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
> > index 2f73bf3abad889c222f15c39a3d43de1a1cf5fbb..7213d9894c82d079bf92f1ec62d4eebb500cdfa4 100644
> > --- a/drivers/net/can/m_can/tcan4x5x-core.c
> > +++ b/drivers/net/can/m_can/tcan4x5x-core.c
> > @@ -92,6 +92,8 @@
> >  #define TCAN4X5X_MODE_STANDBY BIT(6)
> >  #define TCAN4X5X_MODE_NORMAL BIT(7)
> >  
> > +#define TCAN4X5X_NWKRQ_VOLTAGE_VIO BIT(19)
> > +
> >  #define TCAN4X5X_DISABLE_WAKE_MSK	(BIT(31) | BIT(30))
> >  #define TCAN4X5X_DISABLE_INH_MSK	BIT(9)
> >  
> > @@ -267,6 +269,13 @@ static int tcan4x5x_init(struct m_can_classdev *cdev)
> >  	if (ret)
> >  		return ret;
> >  
> > +	if (tcan4x5x->nwkrq_voltage_vio) {
> > +		ret = regmap_set_bits(tcan4x5x->regmap, TCAN4X5X_CONFIG,
> > +				      TCAN4X5X_NWKRQ_VOLTAGE_VIO);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> >  	return ret;
> >  }
> >  
> > @@ -318,6 +327,15 @@ static const struct tcan4x5x_version_info
> >  	return &tcan4x5x_versions[TCAN4X5X];
> >  }
> >  
> > +static void tcan4x5x_get_dt_data(struct m_can_classdev *cdev)
> > +{
> > +	struct tcan4x5x_priv *tcan4x5x = cdev_to_priv(cdev);
> > +	struct device_node *np = cdev->dev->of_node;
> 
> Guess we can remove this line. Sorry

ACK. Will fixup here.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH can-next v5 2/2] can: tcan4x5x: add option for selecting nWKRQ voltage

[Sean Nyekjaer]

On Mon, Nov 18, 2024 at 04:14:09PM +0100, Marc Kleine-Budde wrote:
> On 18.11.2024 16:05:42, Sean Nyekjaer wrote:
> > Hi Marc,
> > 
> > On Thu, Nov 14, 2024 at 10:14:50AM +0100, Sean Nyekjaer wrote:
> > > The nWKRQ pin supports an output voltage of either the internal reference
> > > voltage (3.6V) or the reference voltage of
> > > the digital interface 0-6V (VIO).
> > > Add the devicetree option ti,nwkrq-voltage-vio to set it to VIO.
> > > 
> > > If this property is omitted the reset default, the internal reference
> > > voltage, is used.
> > > 
> > > Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> > > Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
> > > Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
> > > ---
> > >  drivers/net/can/m_can/tcan4x5x-core.c | 20 ++++++++++++++++++++
> > >  drivers/net/can/m_can/tcan4x5x.h      |  2 ++
> > >  2 files changed, 22 insertions(+)
> > > 
> > > diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
> > > index 2f73bf3abad889c222f15c39a3d43de1a1cf5fbb..7213d9894c82d079bf92f1ec62d4eebb500cdfa4 100644
> > > --- a/drivers/net/can/m_can/tcan4x5x-core.c
> > > +++ b/drivers/net/can/m_can/tcan4x5x-core.c
> > > @@ -92,6 +92,8 @@
> > >  #define TCAN4X5X_MODE_STANDBY BIT(6)
> > >  #define TCAN4X5X_MODE_NORMAL BIT(7)
> > >  
> > > +#define TCAN4X5X_NWKRQ_VOLTAGE_VIO BIT(19)
> > > +
> > >  #define TCAN4X5X_DISABLE_WAKE_MSK	(BIT(31) | BIT(30))
> > >  #define TCAN4X5X_DISABLE_INH_MSK	BIT(9)
> > >  
> > > @@ -267,6 +269,13 @@ static int tcan4x5x_init(struct m_can_classdev *cdev)
> > >  	if (ret)
> > >  		return ret;
> > >  
> > > +	if (tcan4x5x->nwkrq_voltage_vio) {
> > > +		ret = regmap_set_bits(tcan4x5x->regmap, TCAN4X5X_CONFIG,
> > > +				      TCAN4X5X_NWKRQ_VOLTAGE_VIO);
> > > +		if (ret)
> > > +			return ret;
> > > +	}
> > > +
> > >  	return ret;
> > >  }
> > >  
> > > @@ -318,6 +327,15 @@ static const struct tcan4x5x_version_info
> > >  	return &tcan4x5x_versions[TCAN4X5X];
> > >  }
> > >  
> > > +static void tcan4x5x_get_dt_data(struct m_can_classdev *cdev)
> > > +{
> > > +	struct tcan4x5x_priv *tcan4x5x = cdev_to_priv(cdev);
> > > +	struct device_node *np = cdev->dev->of_node;
> > 
> > Guess we can remove this line. Sorry
> 
> ACK. Will fixup here.

Remenber to do the fixup :)

Sorry for the extra work

/Sean

Re: [PATCH can-next v5 0/2] can: tcan4x5x: add option for selecting nWKRQ voltage

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 474 bytes --]

On 14.11.2024 10:14:48, Sean Nyekjaer wrote:
> This series adds support for setting the nWKRQ voltage.
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>

Applied to linux-can-next.

Thanks,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]