[PATCH v1 0/5] Add STM32MP25 PCIe drivers

[PATCH v1 0/5] Add STM32MP25 PCIe drivers

[Christian Bruel]

This patch series adds PCIe drivers STM32MP25 SoC from STMicrolectronics
and respective yaml schema for the root complex and device modes.

Changes in v1:
   Address comments from Rob Herring and Bjorn Helgaas:
   - Drop st,limit-mrrs and st,max-payload-size from this patchset
   - Remove single reset and clocks binding names and misc yaml cleanups
   - Split RC/EP common bindings to a separate schema file
   - Use correct PCIE_T_PERST_CLK_US and PCIE_T_RRS_READY_MS defines
   - Use .remove instead of .remove_new
   - Fix bar reset sequence in EP driver
   - Use cleanup blocks for error handling
   - Cosmetic fixes
   
Christian Bruel (5):
  dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings
  PCI: stm32: Add PCIe host support for STM32MP25
  dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings
  PCI: stm32: Add PCIe endpoint support for STM32MP25
  MAINTAINERS: add entry for ST STM32MP25 PCIe drivers

 .../bindings/pci/st,stm32-pcie-common.yaml    |  45 ++
 .../bindings/pci/st,stm32-pcie-ep.yaml        |  61 +++
 .../bindings/pci/st,stm32-pcie-host.yaml      |  99 ++++
 MAINTAINERS                                   |   7 +
 drivers/pci/controller/dwc/Kconfig            |  24 +
 drivers/pci/controller/dwc/Makefile           |   2 +
 drivers/pci/controller/dwc/pcie-stm32-ep.c    | 445 ++++++++++++++++++
 drivers/pci/controller/dwc/pcie-stm32.c       | 402 ++++++++++++++++
 drivers/pci/controller/dwc/pcie-stm32.h       |  17 +
 9 files changed, 1102 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32-ep.c
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32.c
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32.h

-- 
2.34.1

[PATCH v1 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings

[Christian Bruel]

Document the bindings for STM32MP25 PCIe Controller configured in
root complex mode.

Supports 4 legacy interrupts and MSI interrupts from the ARM
GICv2m controller.

STM32 PCIe may be in a power domain which is the case for the STM32MP25
based boards.

Supports wake# from wake-gpios

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 .../bindings/pci/st,stm32-pcie-common.yaml    | 45 +++++++++
 .../bindings/pci/st,stm32-pcie-host.yaml      | 99 +++++++++++++++++++
 2 files changed, 144 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml

diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
new file mode 100644
index 000000000000..694d5046e632
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/st,stm32-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP25 PCIe RC/EP controller
+
+maintainers:
+  - Christian Bruel <christian.bruel@foss.st.com>
+
+description:
+  STM32MP25 PCIe RC/EP common properties
+
+properties:
+  clocks:
+    maxItems: 1
+    description: PCIe system clock
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  power-domains:
+    maxItems: 1
+
+  access-controllers:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+required:
+  - clocks
+  - resets
+  - phys
+  - phy-names
+
+
diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
new file mode 100644
index 000000000000..18083cc69024
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/st,stm32-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP25 PCIe root complex driver
+
+maintainers:
+  - Christian Bruel <christian.bruel@foss.st.com>
+
+description:
+  PCIe root complex controller based on the Synopsys DesignWare PCIe core.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - $ref: /schemas/pci/st,stm32-pcie-common.yaml#
+
+select:
+  properties:
+    compatible:
+      const: st,stm32mp25-pcie-rc
+  required:
+    - compatible
+
+properties:
+  compatible:
+    const: st,stm32mp25-pcie-rc
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: PCIe configuration registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+
+  num-lanes:
+    const: 1
+
+  msi-parent:
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO controlled connection to WAKE# input signal
+    maxItems: 1
+
+  wakeup-source: true
+
+dependentRequired:
+  wakeup-source: [ wake-gpios ]
+
+required:
+  - interrupt-map
+  - interrupt-map-mask
+  - ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+    pcie@48400000 {
+        compatible = "st,stm32mp25-pcie-rc";
+        device_type = "pci";
+        num-lanes = <1>;
+        reg = <0x48400000 0x400000>,
+              <0x10000000 0x10000>;
+        reg-names = "dbi", "config";
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 2 &intc 0 0 GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 3 &intc 0 0 GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 4 &intc 0 0 GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x01000000 0 0x10010000 0x10010000 0 0x10000>,
+                 <0x02000000 0 0x10020000 0x10020000 0 0x7fe0000>,
+                 <0x42000000 0 0x18000000 0x18000000 0 0x8000000>;
+        clocks = <&rcc CK_BUS_PCIE>;
+        phys = <&combophy PHY_TYPE_PCIE>;
+        phy-names = "pcie-phy";
+        resets = <&rcc PCIE_R>;
+        msi-parent = <&v2m0>;
+        wakeup-source;
+        wake-gpios = <&gpioh 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+        reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+        access-controllers = <&rifsc 68>;
+        power-domains = <&CLUSTER_PD>;
+    };
+
-- 
2.34.1

[PATCH v1 2/5] PCI: stm32: Add PCIe host support for STM32MP25

[Christian Bruel]

Add driver for the STM32MP25 SoC PCIe Gen2 controller based on the
DesignWare PCIe core.

Supports MSI via GICv2m, Single Virtual Channel, Single Function

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 drivers/pci/controller/dwc/Kconfig      |  12 +
 drivers/pci/controller/dwc/Makefile     |   1 +
 drivers/pci/controller/dwc/pcie-stm32.c | 402 ++++++++++++++++++++++++
 drivers/pci/controller/dwc/pcie-stm32.h |  15 +
 4 files changed, 430 insertions(+)
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32.c
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32.h

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index b6d6778b0698..0c18879b604c 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -389,6 +389,18 @@ config PCIE_SPEAR13XX
 	help
 	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
 
+config PCIE_STM32
+	tristate "STMicroelectronics STM32MP25 PCIe Controller (host mode)"
+	depends on ARCH_STM32 || COMPILE_TEST
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	help
+	  Enables support for the DesignWare core based PCIe host controller
+	  found in STM32MP25 SoC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called pcie-stm32.
+
 config PCI_DRA7XX
 	tristate
 
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index a8308d9ea986..576d99cb3bc5 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
 obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
 obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
 obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4.o
+obj-$(CONFIG_PCIE_STM32) += pcie-stm32.o
 
 # The following drivers are for devices that use the generic ACPI
 # pci_root.c driver but don't support standard ECAM config access.
diff --git a/drivers/pci/controller/dwc/pcie-stm32.c b/drivers/pci/controller/dwc/pcie-stm32.c
new file mode 100644
index 000000000000..fa787406c0e4
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-stm32.c
@@ -0,0 +1,402 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics STM32MP25 PCIe root complex driver.
+ *
+ * Copyright (C) 2024 STMicroelectronics
+ * Author: Christian Bruel <christian.bruel@foss.st.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pinctrl/devinfo.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "pcie-designware.h"
+#include "pcie-stm32.h"
+#include "../../pci.h"
+
+struct stm32_pcie {
+	struct dw_pcie *pci;
+	struct regmap *regmap;
+	struct reset_control *rst;
+	struct phy *phy;
+	struct clk *clk;
+	struct gpio_desc *perst_gpio;
+	struct gpio_desc *wake_gpio;
+	unsigned int wake_irq;
+	bool link_is_up;
+};
+
+static int stm32_pcie_start_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	u32 ret;
+
+	if (stm32_pcie->perst_gpio) {
+		/* Make sure PERST# is asserted. */
+		gpiod_set_value(stm32_pcie->perst_gpio, 1);
+
+		fsleep(PCIE_T_PERST_CLK_US);
+		gpiod_set_value(stm32_pcie->perst_gpio, 0);
+	}
+
+	ret = regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+				 STM32MP25_PCIECR_LTSSM_EN,
+				 STM32MP25_PCIECR_LTSSM_EN);
+
+	if (stm32_pcie->perst_gpio)
+		msleep(PCIE_T_RRS_READY_MS);
+
+	return ret;
+}
+
+static void stm32_pcie_stop_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_LTSSM_EN, 0);
+
+	/* Assert PERST# */
+	if (stm32_pcie->perst_gpio)
+		gpiod_set_value(stm32_pcie->perst_gpio, 1);
+}
+
+static int stm32_pcie_suspend(struct device *dev)
+{
+	struct stm32_pcie *stm32_pcie = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev) || device_wakeup_path(dev))
+		enable_irq_wake(stm32_pcie->wake_irq);
+
+	return 0;
+}
+
+static int stm32_pcie_resume(struct device *dev)
+{
+	struct stm32_pcie *stm32_pcie = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev) || device_wakeup_path(dev))
+		disable_irq_wake(stm32_pcie->wake_irq);
+
+	return 0;
+}
+
+static int stm32_pcie_suspend_noirq(struct device *dev)
+{
+	struct stm32_pcie *stm32_pcie = dev_get_drvdata(dev);
+
+	stm32_pcie->link_is_up = dw_pcie_link_up(stm32_pcie->pci);
+
+	stm32_pcie_stop_link(stm32_pcie->pci);
+	clk_disable_unprepare(stm32_pcie->clk);
+
+	if (!device_may_wakeup(dev) && !device_wakeup_path(dev))
+		phy_exit(stm32_pcie->phy);
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int stm32_pcie_resume_noirq(struct device *dev)
+{
+	struct stm32_pcie *stm32_pcie = dev_get_drvdata(dev);
+	struct dw_pcie *pci = stm32_pcie->pci;
+	struct dw_pcie_rp *pp = &pci->pp;
+	int ret;
+
+	/* init_state must be called first to force clk_req# gpio when no
+	 * device is plugged.
+	 */
+	if (!IS_ERR(dev->pins->init_state))
+		ret = pinctrl_select_state(dev->pins->p, dev->pins->init_state);
+	else
+		ret = pinctrl_pm_select_default_state(dev);
+
+	if (ret) {
+		dev_err(dev, "Failed to activate pinctrl pm state: %d\n", ret);
+		return ret;
+	}
+
+	if (!device_may_wakeup(dev) && !device_wakeup_path(dev)) {
+		ret = phy_init(stm32_pcie->phy);
+		if (ret) {
+			pinctrl_pm_select_default_state(dev);
+			return ret;
+		}
+	}
+
+	ret = clk_prepare_enable(stm32_pcie->clk);
+	if (ret)
+		goto clk_err;
+
+	ret = dw_pcie_setup_rc(pp);
+	if (ret)
+		goto pcie_err;
+
+	if (stm32_pcie->link_is_up) {
+		ret = stm32_pcie_start_link(stm32_pcie->pci);
+		if (ret)
+			goto pcie_err;
+
+		/* Ignore errors, the link may come up later */
+		dw_pcie_wait_for_link(stm32_pcie->pci);
+	}
+
+	pinctrl_pm_select_default_state(dev);
+
+	return 0;
+
+pcie_err:
+	dw_pcie_host_deinit(pp);
+	clk_disable_unprepare(stm32_pcie->clk);
+clk_err:
+	phy_exit(stm32_pcie->phy);
+	pinctrl_pm_select_default_state(dev);
+
+	return ret;
+}
+
+static const struct dev_pm_ops stm32_pcie_pm_ops = {
+	NOIRQ_SYSTEM_SLEEP_PM_OPS(stm32_pcie_suspend_noirq,
+				  stm32_pcie_resume_noirq)
+	SYSTEM_SLEEP_PM_OPS(stm32_pcie_suspend, stm32_pcie_resume)
+};
+
+static const struct dw_pcie_host_ops stm32_pcie_host_ops = {
+};
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.start_link = stm32_pcie_start_link,
+	.stop_link = stm32_pcie_stop_link
+};
+
+static irqreturn_t stm32_pcie_wake_irq_handler(int irq, void *priv)
+{
+	struct stm32_pcie *stm32_pcie = priv;
+	struct device *dev = stm32_pcie->pci->dev;
+
+	dev_dbg(dev, "PCIe host wakeup by EP");
+
+	/* Notify PM core we are wakeup source */
+	pm_wakeup_event(dev, 0);
+	pm_system_wakeup();
+
+	return IRQ_HANDLED;
+}
+
+static int stm32_add_pcie_port(struct stm32_pcie *stm32_pcie,
+			       struct platform_device *pdev)
+{
+	struct dw_pcie *pci = stm32_pcie->pci;
+	struct device *dev = pci->dev;
+	struct dw_pcie_rp *pp = &pci->pp;
+	int ret;
+
+	ret = phy_set_mode(stm32_pcie->phy, PHY_MODE_PCIE);
+	if (ret)
+		return ret;
+
+	ret = phy_init(stm32_pcie->phy);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+				 STM32MP25_PCIECR_TYPE_MASK,
+				 STM32MP25_PCIECR_RC);
+	if (ret)
+		goto phy_disable;
+
+	reset_control_assert(stm32_pcie->rst);
+	reset_control_deassert(stm32_pcie->rst);
+
+	ret = clk_prepare_enable(stm32_pcie->clk);
+	if (ret) {
+		dev_err(dev, "Core clock enable failed %d\n", ret);
+		goto phy_disable;
+	}
+
+	pp->ops = &stm32_pcie_host_ops;
+	ret = dw_pcie_host_init(pp);
+	if (ret) {
+		dev_err(dev, "Failed to initialize host: %d\n", ret);
+		clk_disable_unprepare(stm32_pcie->clk);
+		goto phy_disable;
+	}
+
+	return 0;
+
+phy_disable:
+	phy_exit(stm32_pcie->phy);
+
+	return ret;
+}
+
+static int stm32_pcie_probe(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie;
+	struct dw_pcie *dw;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	stm32_pcie = devm_kzalloc(dev, sizeof(*stm32_pcie), GFP_KERNEL);
+	if (!stm32_pcie)
+		return -ENOMEM;
+
+	dw = devm_kzalloc(dev, sizeof(*dw), GFP_KERNEL);
+	if (!dw)
+		return -ENOMEM;
+	stm32_pcie->pci = dw;
+
+	dw->dev = dev;
+	dw->ops = &dw_pcie_ops;
+
+	stm32_pcie->regmap = syscon_regmap_lookup_by_compatible("st,stm32mp25-syscfg");
+	if (IS_ERR(stm32_pcie->regmap))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->regmap),
+				     "No syscfg specified\n");
+
+	stm32_pcie->phy = devm_phy_get(dev, "pcie-phy");
+	if (IS_ERR(stm32_pcie->phy))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->phy),
+				     "Failed to get pcie-phy\n");
+
+	stm32_pcie->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(stm32_pcie->clk))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->clk),
+				     "Failed to get PCIe clock source\n");
+
+	stm32_pcie->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(stm32_pcie->rst))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->rst),
+				     "Failed to get PCIe reset\n");
+
+	stm32_pcie->perst_gpio = devm_gpiod_get_optional(dev, "reset",
+							 GPIOD_OUT_HIGH);
+	if (IS_ERR(stm32_pcie->perst_gpio))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->perst_gpio),
+				     "Failed to get reset GPIO\n");
+
+	platform_set_drvdata(pdev, stm32_pcie);
+
+	if (device_property_read_bool(dev, "wakeup-source")) {
+		stm32_pcie->wake_gpio = devm_gpiod_get_optional(dev, "wake",
+								GPIOD_IN);
+		if (IS_ERR(stm32_pcie->wake_gpio))
+			return dev_err_probe(dev, PTR_ERR(stm32_pcie->wake_gpio),
+					     "Failed to get wake GPIO\n");
+	}
+
+	if (stm32_pcie->wake_gpio) {
+		stm32_pcie->wake_irq = gpiod_to_irq(stm32_pcie->wake_gpio);
+
+		ret = devm_request_threaded_irq(&pdev->dev,
+						stm32_pcie->wake_irq, NULL,
+						stm32_pcie_wake_irq_handler,
+						IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+						"wake_irq", stm32_pcie);
+
+		if (ret)
+			return dev_err_probe(dev, ret, "Failed to request WAKE IRQ: %d\n", ret);
+	}
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable runtime PM %d\n", ret);
+		return ret;
+	}
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to get runtime PM %d\n", ret);
+		return ret;
+	}
+
+	ret = stm32_add_pcie_port(stm32_pcie, pdev);
+	if (ret)  {
+		pm_runtime_put_sync(&pdev->dev);
+		return ret;
+	}
+
+	if (stm32_pcie->wake_gpio)
+		device_set_wakeup_capable(dev, true);
+
+	return 0;
+}
+
+static void stm32_pcie_remove(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie = platform_get_drvdata(pdev);
+	struct dw_pcie_rp *pp = &stm32_pcie->pci->pp;
+
+	if (stm32_pcie->wake_gpio)
+		device_init_wakeup(&pdev->dev, false);
+
+	dw_pcie_host_deinit(pp);
+	clk_disable_unprepare(stm32_pcie->clk);
+
+	phy_exit(stm32_pcie->phy);
+
+	pm_runtime_put_sync(&pdev->dev);
+}
+
+static const struct of_device_id stm32_pcie_of_match[] = {
+	{ .compatible = "st,stm32mp25-pcie-rc" },
+	{},
+};
+
+static struct platform_driver stm32_pcie_driver = {
+	.probe = stm32_pcie_probe,
+	.remove = stm32_pcie_remove,
+	.driver = {
+		.name = "stm32-pcie",
+		.of_match_table = stm32_pcie_of_match,
+		.pm		= &stm32_pcie_pm_ops,
+	},
+};
+
+static bool is_stm32_pcie_driver(struct device *dev)
+{
+	/* PCI bridge */
+	dev = get_device(dev);
+
+	/* Platform driver */
+	dev = get_device(dev->parent);
+
+	return (dev->driver == &stm32_pcie_driver.driver);
+}
+
+/*
+ * DMA masters can only access the first 4GB of memory space,
+ * so we setup the bus DMA limit accordingly.
+ */
+static int stm32_dma_limit(struct pci_dev *pdev, void *data)
+{
+	dev_dbg(&pdev->dev, "disabling DMA DAC for device");
+
+	pdev->dev.bus_dma_limit = DMA_BIT_MASK(32);
+
+	return 0;
+}
+
+static void quirk_stm32_dma_mask(struct pci_dev *pci)
+{
+	struct pci_dev *root_port;
+
+	root_port = pcie_find_root_port(pci);
+
+	if (root_port && is_stm32_pcie_driver(root_port->dev.parent))
+		pci_walk_bus(pci->bus, stm32_dma_limit, NULL);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SYNOPSYS, 0x0550, quirk_stm32_dma_mask);
+
+module_platform_driver(stm32_pcie_driver);
+
+MODULE_AUTHOR("Christian Bruel <christian.bruel@foss.st.com>");
+MODULE_DESCRIPTION("STM32MP25 PCIe Controller driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, stm32_pcie_of_match);
diff --git a/drivers/pci/controller/dwc/pcie-stm32.h b/drivers/pci/controller/dwc/pcie-stm32.h
new file mode 100644
index 000000000000..3efd00937d3d
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-stm32.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ST PCIe driver definitions for STM32-MP25 SoC
+ *
+ * Copyright (C) 2024 STMicroelectronics - All Rights Reserved
+ * Author: Christian Bruel <christian.bruel@foss.st.com>
+ */
+
+#define to_stm32_pcie(x)	dev_get_drvdata((x)->dev)
+
+#define STM32MP25_PCIECR_TYPE_MASK	GENMASK(11, 8)
+#define STM32MP25_PCIECR_LTSSM_EN	BIT(2)
+#define STM32MP25_PCIECR_RC		BIT(10)
+
+#define SYSCFG_PCIECR			0x6000
-- 
2.34.1

[PATCH v1 3/5] dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings

[Christian Bruel]

STM32MP25 PCIe Controller is based on the DesignWare core configured as
end point mode from the SYSCFG register.

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 .../bindings/pci/st,stm32-pcie-ep.yaml        | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml

diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
new file mode 100644
index 000000000000..0da3ee012ba8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/st,stm32-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP25 PCIe endpoint driver
+
+maintainers:
+  - Christian Bruel <christian.bruel@foss.st.com>
+
+description:
+  PCIe endpoint controller based on the Synopsys DesignWare PCIe core.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+  - $ref: /schemas/pci/st,stm32-pcie-common.yaml#
+
+properties:
+  compatible:
+    const: st,stm32mp25-pcie-ep
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: PCIe configuration registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: addr_space
+
+required:
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+    pcie-ep@48400000 {
+        compatible = "st,stm32mp25-pcie-ep";
+        num-lanes = <1>;
+        reg = <0x48400000 0x400000>,
+              <0x10000000 0x8000000>;
+        reg-names = "dbi", "addr_space";
+        clocks = <&rcc CK_BUS_PCIE>;
+        phys = <&combophy PHY_TYPE_PCIE>;
+        phy-names = "pcie-phy";
+        resets = <&rcc PCIE_R>;
+        pinctrl-names = "default", "init";
+        pinctrl-0 = <&pcie_pins_a>;
+        pinctrl-1 = <&pcie_init_pins_a>;
+        reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+        access-controllers = <&rifsc 68>;
+        power-domains = <&CLUSTER_PD>;
+    };
-- 
2.34.1

[PATCH v1 4/5] PCI: stm32: Add PCIe endpoint support for STM32MP25

[Christian Bruel]

Add driver to configure the STM32MP25 SoC PCIe Gen2 controller based on the
DesignWare PCIe core in endpoint mode.

Uses the common reference clock provided by the host.

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 drivers/pci/controller/dwc/Kconfig         |  12 +
 drivers/pci/controller/dwc/Makefile        |   1 +
 drivers/pci/controller/dwc/pcie-stm32-ep.c | 445 +++++++++++++++++++++
 drivers/pci/controller/dwc/pcie-stm32.h    |   2 +
 4 files changed, 460 insertions(+)
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32-ep.c

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 0c18879b604c..f5601c81b56c 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -401,6 +401,18 @@ config PCIE_STM32
 	  This driver can also be built as a module. If so, the module
 	  will be called pcie-stm32.
 
+config PCIE_STM32_EP
+	tristate "STMicroelectronics STM32MP25 PCIe Controller (endpoint mode)"
+	depends on ARCH_STM32 || COMPILE_TEST
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	help
+	  Enables endpoint support for DesignWare core based PCIe controller in found
+	  in STM32MP25 SoC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called pcie-stm32-ep.
+
 config PCI_DRA7XX
 	tristate
 
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 576d99cb3bc5..caebd98f6dd3 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
 obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
 obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4.o
 obj-$(CONFIG_PCIE_STM32) += pcie-stm32.o
+obj-$(CONFIG_PCIE_STM32_EP) += pcie-stm32-ep.o
 
 # The following drivers are for devices that use the generic ACPI
 # pci_root.c driver but don't support standard ECAM config access.
diff --git a/drivers/pci/controller/dwc/pcie-stm32-ep.c b/drivers/pci/controller/dwc/pcie-stm32-ep.c
new file mode 100644
index 000000000000..27f5725a7e76
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-stm32-ep.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics STM32MP25 PCIe endpoint driver.
+ *
+ * Copyright (C) 2024 STMicroelectronics
+ * Author: Christian Bruel <christian.bruel@foss.st.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "pcie-designware.h"
+#include "pcie-stm32.h"
+
+#define STM32MP25_PCIECR_EP 0
+#define STM32MP25_PCIECR_REQ_RETRY_EN	BIT(3)
+
+enum stm32_pcie_ep_link_status {
+	STM32_PCIE_EP_LINK_DISABLED,
+	STM32_PCIE_EP_LINK_ENABLED,
+};
+
+struct stm32_pcie {
+	struct dw_pcie *pci;
+	struct regmap *regmap;
+	struct reset_control *rst;
+	struct phy *phy;
+	struct clk *clk;
+	struct gpio_desc *perst_gpio;
+	enum stm32_pcie_ep_link_status link_status;
+	unsigned int perst_irq;
+};
+
+static void stm32_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	enum pci_barno bar;
+
+	for (bar = 0; bar < PCI_STD_NUM_BARS; bar++)
+		dw_pcie_ep_reset_bar(pci, bar);
+
+	/* Defer Completion Requests until link started */
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_REQ_RETRY_EN,
+			   STM32MP25_PCIECR_REQ_RETRY_EN);
+}
+
+static int stm32_pcie_enable_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	int ret;
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_LTSSM_EN,
+			   STM32MP25_PCIECR_LTSSM_EN);
+
+	ret = dw_pcie_wait_for_link(pci);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_REQ_RETRY_EN,
+			   0);
+
+	return 0;
+}
+
+static void stm32_pcie_disable_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_REQ_RETRY_EN,
+			   STM32MP25_PCIECR_REQ_RETRY_EN);
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR, STM32MP25_PCIECR_LTSSM_EN, 0);
+}
+
+static int stm32_pcie_start_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	int ret;
+
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_ENABLED) {
+		dev_dbg(pci->dev, "Link is already enabled\n");
+		return 0;
+	}
+
+	ret = stm32_pcie_enable_link(pci);
+	if (ret) {
+		dev_err(pci->dev, "PCIe cannot establish link: %d\n", ret);
+		return ret;
+	}
+
+	stm32_pcie->link_status = STM32_PCIE_EP_LINK_ENABLED;
+
+	enable_irq(stm32_pcie->perst_irq);
+
+	return 0;
+}
+
+static void stm32_pcie_stop_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_DISABLED) {
+		dev_dbg(pci->dev, "Link is already disabled\n");
+		return;
+	}
+
+	disable_irq(stm32_pcie->perst_irq);
+
+	stm32_pcie_disable_link(pci);
+
+	stm32_pcie->link_status = STM32_PCIE_EP_LINK_DISABLED;
+}
+
+static int stm32_pcie_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
+				unsigned int type, u16 interrupt_num)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	switch (type) {
+	case PCI_IRQ_INTX:
+		return dw_pcie_ep_raise_intx_irq(ep, func_no);
+	case PCI_IRQ_MSI:
+		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
+	default:
+		dev_err(pci->dev, "UNKNOWN IRQ type\n");
+		return -EINVAL;
+	}
+}
+
+static const struct pci_epc_features stm32_pcie_epc_features = {
+	.msi_capable = true,
+	.align = 1 << 16,
+};
+
+static const struct pci_epc_features*
+stm32_pcie_get_features(struct dw_pcie_ep *ep)
+{
+	return &stm32_pcie_epc_features;
+}
+
+static const struct dw_pcie_ep_ops stm32_pcie_ep_ops = {
+	.init = stm32_pcie_ep_init,
+	.raise_irq = stm32_pcie_raise_irq,
+	.get_features = stm32_pcie_get_features,
+};
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.start_link = stm32_pcie_start_link,
+	.stop_link = stm32_pcie_stop_link,
+};
+
+static int stm32_pcie_enable_resources(struct stm32_pcie *stm32_pcie)
+{
+	int ret;
+
+	ret = phy_init(stm32_pcie->phy);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(stm32_pcie->clk);
+	if (ret)
+		phy_exit(stm32_pcie->phy);
+
+	return ret;
+}
+
+static void stm32_pcie_disable_resources(struct stm32_pcie *stm32_pcie)
+{
+	clk_disable_unprepare(stm32_pcie->clk);
+
+	phy_exit(stm32_pcie->phy);
+}
+
+static void stm32_pcie_perst_assert(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	struct device *dev = pci->dev;
+
+	dev_dbg(dev, "PERST asserted by host. Shutting down the PCIe link\n");
+
+	/*
+	 * Do not try to release resources if the PERST# is
+	 * asserted before the link is started.
+	 */
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_DISABLED) {
+		dev_dbg(pci->dev, "Link is already disabled\n");
+		return;
+	}
+
+	stm32_pcie_disable_link(pci);
+
+	stm32_pcie_disable_resources(stm32_pcie);
+
+	pm_runtime_put_sync(dev);
+
+	stm32_pcie->link_status = STM32_PCIE_EP_LINK_DISABLED;
+}
+
+static void stm32_pcie_perst_deassert(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+	struct device *dev = pci->dev;
+	struct dw_pcie_ep *ep = &pci->ep;
+	int ret;
+
+	if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_ENABLED) {
+		dev_dbg(pci->dev, "Link is already enabled\n");
+		return;
+	}
+
+	dev_dbg(dev, "PERST de-asserted by host. Starting link training\n");
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm runtime resume failed: %d\n", ret);
+		return;
+	}
+
+	ret = stm32_pcie_enable_resources(stm32_pcie);
+	if (ret) {
+		dev_err(dev, "Failed to enable resources: %d\n", ret);
+		goto err_clk;
+	}
+
+	ret = dw_pcie_ep_init_registers(ep);
+	if (ret) {
+		dev_err(dev, "Failed to complete initialization: %d\n", ret);
+		goto err_init_regs;
+	}
+
+	pci_epc_init_notify(ep->epc);
+
+	ret = stm32_pcie_enable_link(pci);
+	if (ret) {
+		dev_err(dev, "PCIe Cannot establish link: %d\n", ret);
+		goto err_link;
+	}
+
+	stm32_pcie->link_status = STM32_PCIE_EP_LINK_ENABLED;
+
+	return;
+
+err_link:
+	pci_epc_deinit_notify(ep->epc);
+
+err_init_regs:
+	stm32_pcie_disable_resources(stm32_pcie);
+
+err_clk:
+	pm_runtime_put_sync(dev);
+}
+
+static irqreturn_t stm32_pcie_ep_perst_irq_thread(int irq, void *data)
+{
+	struct stm32_pcie *stm32_pcie = data;
+	struct dw_pcie *pci = stm32_pcie->pci;
+	u32 perst;
+
+	perst = gpiod_get_value(stm32_pcie->perst_gpio);
+	if (perst)
+		stm32_pcie_perst_assert(pci);
+	else
+		stm32_pcie_perst_deassert(pci);
+
+	return IRQ_HANDLED;
+}
+
+static int stm32_add_pcie_ep(struct stm32_pcie *stm32_pcie,
+			     struct platform_device *pdev)
+{
+	struct dw_pcie *pci = stm32_pcie->pci;
+	struct dw_pcie_ep *ep = &pci->ep;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+				 STM32MP25_PCIECR_TYPE_MASK,
+				 STM32MP25_PCIECR_EP);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm runtime resume failed: %d\n", ret);
+		return ret;
+	}
+
+	reset_control_assert(stm32_pcie->rst);
+	reset_control_deassert(stm32_pcie->rst);
+
+	ep->ops = &stm32_pcie_ep_ops;
+
+	ret = dw_pcie_ep_init(ep);
+	if (ret) {
+		dev_err(dev, "failed to initialize ep: %d\n", ret);
+		goto err_init;
+	}
+
+	ret = stm32_pcie_enable_resources(stm32_pcie);
+	if (ret) {
+		dev_err(dev, "failed to enable resources: %d\n", ret);
+		goto err_clk;
+	}
+
+	ret = dw_pcie_ep_init_registers(ep);
+	if (ret) {
+		dev_err(dev, "Failed to initialize DWC endpoint registers\n");
+		goto err_init_regs;
+	}
+
+	pci_epc_init_notify(ep->epc);
+
+	return 0;
+
+err_init_regs:
+	stm32_pcie_disable_resources(stm32_pcie);
+
+err_clk:
+	dw_pcie_ep_deinit(ep);
+
+err_init:
+	pm_runtime_put_sync(dev);
+	return ret;
+}
+
+static int stm32_pcie_probe(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie;
+	struct dw_pcie *dw;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	stm32_pcie = devm_kzalloc(dev, sizeof(*stm32_pcie), GFP_KERNEL);
+	if (!stm32_pcie)
+		return -ENOMEM;
+
+	dw = devm_kzalloc(dev, sizeof(*dw), GFP_KERNEL);
+	if (!dw)
+		return -ENOMEM;
+
+	stm32_pcie->pci = dw;
+
+	dw->dev = dev;
+	dw->ops = &dw_pcie_ops;
+
+	stm32_pcie->regmap = syscon_regmap_lookup_by_compatible("st,stm32mp25-syscfg");
+	if (IS_ERR(stm32_pcie->regmap))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->regmap),
+				     "No syscfg specified\n");
+
+	stm32_pcie->phy = devm_phy_get(dev, "pcie-phy");
+	if (IS_ERR(stm32_pcie->phy))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->phy),
+				     "failed to get pcie-phy\n");
+
+	stm32_pcie->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(stm32_pcie->clk))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->clk),
+				     "Failed to get PCIe clock source\n");
+
+	stm32_pcie->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(stm32_pcie->rst))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->rst),
+				     "Failed to get PCIe reset\n");
+
+	stm32_pcie->perst_gpio = devm_gpiod_get(dev, "reset", GPIOD_IN);
+	if (IS_ERR(stm32_pcie->perst_gpio))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->perst_gpio),
+				     "Failed to get reset GPIO\n");
+
+	ret = phy_set_mode(stm32_pcie->phy, PHY_MODE_PCIE);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, stm32_pcie);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable pm runtime %d\n", ret);
+		return ret;
+	}
+
+	stm32_pcie->perst_irq = gpiod_to_irq(stm32_pcie->perst_gpio);
+
+	/* Will be enabled in start_link when device is initialized. */
+	irq_set_status_flags(stm32_pcie->perst_irq, IRQ_NOAUTOEN);
+
+	ret = devm_request_threaded_irq(dev, stm32_pcie->perst_irq, NULL,
+					stm32_pcie_ep_perst_irq_thread,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					"perst_irq", stm32_pcie);
+	if (ret) {
+		dev_err(dev, "Failed to request PERST IRQ: %d\n", ret);
+		return ret;
+	}
+
+	return stm32_add_pcie_ep(stm32_pcie, pdev);
+}
+
+static void stm32_pcie_remove(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie = platform_get_drvdata(pdev);
+	struct dw_pcie_ep *ep = &stm32_pcie->pci->ep;
+
+	disable_irq(stm32_pcie->perst_irq);
+
+	dw_pcie_ep_deinit(ep);
+
+	stm32_pcie_disable_resources(stm32_pcie);
+
+	pm_runtime_put_sync(&pdev->dev);
+}
+
+static const struct of_device_id stm32_pcie_ep_of_match[] = {
+	{ .compatible = "st,stm32mp25-pcie-ep" },
+	{},
+};
+
+static struct platform_driver stm32_pcie_ep_driver = {
+	.probe = stm32_pcie_probe,
+	.remove = stm32_pcie_remove,
+	.driver = {
+		.name = "stm32-ep-pcie",
+		.of_match_table = stm32_pcie_ep_of_match,
+	},
+};
+
+module_platform_driver(stm32_pcie_ep_driver);
+
+MODULE_AUTHOR("Christian Bruel <christian.bruel@foss.st.com>");
+MODULE_DESCRIPTION("STM32MP25 PCIe Endpoint Controller driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, stm32_pcie_ep_of_match);
diff --git a/drivers/pci/controller/dwc/pcie-stm32.h b/drivers/pci/controller/dwc/pcie-stm32.h
index 3efd00937d3d..ac0955adf150 100644
--- a/drivers/pci/controller/dwc/pcie-stm32.h
+++ b/drivers/pci/controller/dwc/pcie-stm32.h
@@ -9,7 +9,9 @@
 #define to_stm32_pcie(x)	dev_get_drvdata((x)->dev)
 
 #define STM32MP25_PCIECR_TYPE_MASK	GENMASK(11, 8)
+#define STM32MP25_PCIECR_EP		0
 #define STM32MP25_PCIECR_LTSSM_EN	BIT(2)
+#define STM32MP25_PCIECR_REQ_RETRY_EN	BIT(3)
 #define STM32MP25_PCIECR_RC		BIT(10)
 
 #define SYSCFG_PCIECR			0x6000
-- 
2.34.1

[PATCH v1 5/5] MAINTAINERS: add entry for ST STM32MP25 PCIe drivers

[Christian Bruel]

Add myself as maintainer of STM32MP25 PCIe host and PCIe endpoint drivers

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 4803908768e8..277e1cc0769e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17912,6 +17912,13 @@ L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
 F:	drivers/pci/controller/dwc/pci-exynos.c
 
+PCI DRIVER FOR STM32MP25
+M:	Christian Bruel <christian.bruel@foss.st.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/st,stm32-pcie-*.yaml
+F:	drivers/pci/controller/dwc/*stm32*
+
 PCI DRIVER FOR SYNOPSYS DESIGNWARE
 M:	Jingoo Han <jingoohan1@gmail.com>
 M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-- 
2.34.1

Re: [PATCH v1 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings

[Rob Herring (Arm)]

On Tue, 26 Nov 2024 14:00:00 +0100, Christian Bruel wrote:
> Document the bindings for STM32MP25 PCIe Controller configured in
> root complex mode.
> 
> Supports 4 legacy interrupts and MSI interrupts from the ARM
> GICv2m controller.
> 
> STM32 PCIe may be in a power domain which is the case for the STM32MP25
> based boards.
> 
> Supports wake# from wake-gpios
> 
> Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
> ---
>  .../bindings/pci/st,stm32-pcie-common.yaml    | 45 +++++++++
>  .../bindings/pci/st,stm32-pcie-host.yaml      | 99 +++++++++++++++++++
>  2 files changed, 144 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
>  create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml:45:1: [warning] too many blank lines (2 > 1) (empty-lines)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml: 'oneOf' conditional failed, one must be fixed:
	'unevaluatedProperties' is a required property
	'additionalProperties' is a required property
	hint: Either unevaluatedProperties or additionalProperties must be present
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241126130004.1570091-2-christian.bruel@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.