mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v3 0/2] arm64: dts: qcom: Add DT support for secondary USB on QCS615
@ 2024-12-18 12:12 Song Xue
  2024-12-18 12:12 ` [PATCH v3 1/2] arm64: dts: qcom: qcs615: Add support for secondary USB node " Song Xue
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Song Xue @ 2024-12-18 12:12 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley
  Cc: linux-arm-msm, devicetree, linux-kernel, kernel,
	Krishna Kurapati, Song Xue, Konrad Dybcio

From: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>

These series aim at enabling secondary USB on QCS615. The secondary
controller is High Speed capable and has a QUSB2 Phy.

Base DT Support has been added and is enabled on Ride Platform. The
secondary controller is enabled in host mode.

Signed-off-by: Song Xue <quic_songxue@quicinc.com>
---
Dependencies:
Link to bindings and driver changes:
https://lore.kernel.org/all/20241017130701.3301785-1-quic_kriskura@quicinc.com/

PMIC DT:
https://lore.kernel.org/all/20241202-adds-spmi-pmic-peripherals-for-qcs615-v6-0-bdd306b4940d@quicinc.com/

---
Changes in v3:
- Make a vertical list for clocks property of usb_hsphy_2 node in SOC DT.
- Move GPIO10 node of PM8150 to fixed regulator node to enable high level. 
- Use subject prefixes matching the subsystem for SOC DT and Board DT.
- Link to v2: https://lore.kernel.org/r/20241211-add_usb_host_mode_for_qcs615-v2-0-2c4abdf67635@quicinc.com

Changes in v2:
- Modified "0" dec to "0x0" hex in reg property. 
- Link to v1: https://lore.kernel.org/r/20241211-add_usb_host_mode_for_qcs615-v1-0-edce37204a85@quicinc.com

---
Krishna Kurapati (2):
      arm64: dts: qcom: qcs615: Add support for secondary USB node on QCS615
      arm64: dts: qcom: qcs615-ride: Enable secondary USB controller on QCS615 Ride

 arch/arm64/boot/dts/qcom/qcs615-ride.dts | 36 +++++++++++++++
 arch/arm64/boot/dts/qcom/qcs615.dtsi     | 78 ++++++++++++++++++++++++++++++++
 2 files changed, 114 insertions(+)
---
base-commit: f2b086fc9f039773445d2606dc65dc091ec1830f
change-id: 20241211-add_usb_host_mode_for_qcs615-61feb12fabd0

Best regards,
-- 
Song Xue <quic_songxue@quicinc.com>


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2024-12-26 22:39 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-12-18 12:12 [PATCH v3 0/2] arm64: dts: qcom: Add DT support for secondary USB on QCS615 Song Xue
2024-12-18 12:12 ` [PATCH v3 1/2] arm64: dts: qcom: qcs615: Add support for secondary USB node " Song Xue
2024-12-18 12:12 ` [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable secondary USB controller on QCS615 Ride Song Xue
2024-12-19 20:52   ` Konrad Dybcio
2024-12-26 22:38 ` [PATCH v3 0/2] arm64: dts: qcom: Add DT support for secondary USB on QCS615 Bjorn Andersson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®