Re: [PATCH v2 04/16] dt-bindings: iio: adc: ad7768-1: add VMC output property

["Rob Herring (Arm)" <robh@kernel.org>]

On Mon, 27 Jan 2025 12:12:05 -0300, Jonathan Santos wrote:
> The AD7768-1 provides a buffered common-mode voltage output
> on the VCM pin that can be used to bias analog input signals.
> 
> Add adi,vcm-output to enable the configuration of the VCM output
> circuit.
> 
> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
> ---
> v2 Changes:
> * New patch in v2.
> ---
>  .../bindings/iio/adc/adi,ad7768-1.yaml           | 10 ++++++++++
>  include/dt-bindings/iio/adc/adi,ad7768-1.h       | 16 ++++++++++++++++
>  2 files changed, 26 insertions(+)
>  create mode 100644 include/dt-bindings/iio/adc/adi,ad7768-1.h
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml:69:9: [warning] wrong indentation: expected 6 but found 8 (indentation)
./Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml:101:6: [error] missing starting space in comment (comments)

dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.example.dts:39.35-36 syntax error
FATAL ERROR: Unable to parse input tree
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1506: dt_binding_check] Error 2
make: *** [Makefile:251: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/e17337bc3b0f2e95d3d4f7b6daa7755881e11fba.1737985435.git.Jonathan.Santos@analog.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.