[PATCH net v2] net: usb: rtl8150: enable basic endpoint checking

[PATCH net v2] net: usb: rtl8150: enable basic endpoint checking

[Nikita Zhandarovich]

Syzkaller reports [1] encountering a common issue of utilizing a wrong
usb endpoint type during URB submitting stage. This, in turn, triggers
a warning shown below.

For now, enable simple endpoint checking (specifically, bulk and
interrupt eps, testing control one is not essential) to mitigate
the issue with a view to do other related cosmetic changes later,
if they are necessary.

[1] Syzkaller report:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv>
Modules linked in:
CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617>
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8>
RSP: 0018:ffffc9000441f740 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9
RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001
RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c
FS:  00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733
 __dev_open+0x2d4/0x4e0 net/core/dev.c:1474
 __dev_change_flags+0x561/0x720 net/core/dev.c:8838
 dev_change_flags+0x8f/0x160 net/core/dev.c:8910
 devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177
 inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003
 sock_do_ioctl+0x116/0x280 net/socket.c:1222
 sock_ioctl+0x22e/0x6c0 net/socket.c:1341
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:907 [inline]
 __se_sys_ioctl fs/ioctl.c:893 [inline]
 __x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc04ef73d49
...

This change has not been tested on real hardware.

Reported-and-tested-by: syzbot+d7e968426f644b567e31@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7e968426f644b567e31
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
---
v1 -> v2: move declarations of ep addresses to the beginning of
rtl8150_probe() to remove a build warning in older branches
(courtesy of -Wdeclaration-after-statement).

 drivers/net/usb/rtl8150.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index 01a3b2417a54..ddff6f19ff98 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -71,6 +71,14 @@
 #define MSR_SPEED		(1<<3)
 #define MSR_LINK		(1<<2)
 
+/* USB endpoints */
+enum rtl8150_usb_ep {
+	RTL8150_USB_EP_CONTROL = 0,
+	RTL8150_USB_EP_BULK_IN = 1,
+	RTL8150_USB_EP_BULK_OUT = 2,
+	RTL8150_USB_EP_INT_IN = 3,
+};
+
 /* Interrupt pipe data */
 #define INT_TSR			0x00
 #define INT_RSR			0x01
@@ -867,6 +875,13 @@ static int rtl8150_probe(struct usb_interface *intf,
 	struct usb_device *udev = interface_to_usbdev(intf);
 	rtl8150_t *dev;
 	struct net_device *netdev;
+	static const u8 bulk_ep_addr[] = {
+		RTL8150_USB_EP_BULK_IN | USB_DIR_IN,
+		RTL8150_USB_EP_BULK_OUT | USB_DIR_OUT,
+		0};
+	static const u8 int_ep_addr[] = {
+		RTL8150_USB_EP_INT_IN | USB_DIR_IN,
+		0};
 
 	netdev = alloc_etherdev(sizeof(rtl8150_t));
 	if (!netdev)
@@ -880,6 +895,13 @@ static int rtl8150_probe(struct usb_interface *intf,
 		return -ENOMEM;
 	}
 
+	/* Verify that all required endpoints are present */
+	if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) ||
+	    !usb_check_int_endpoints(intf, int_ep_addr)) {
+		dev_err(&intf->dev, "couldn't find required endpoints\n");
+		goto out;
+	}
+
 	tasklet_setup(&dev->tl, rx_fixup);
 	spin_lock_init(&dev->rx_pool_lock);
 

Re: [PATCH net v2] net: usb: rtl8150: enable basic endpoint checking

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net.git (main)
by Paolo Abeni <pabeni@redhat.com>:

On Fri, 24 Jan 2025 01:30:20 -0800 you wrote:
> Syzkaller reports [1] encountering a common issue of utilizing a wrong
> usb endpoint type during URB submitting stage. This, in turn, triggers
> a warning shown below.
> 
> For now, enable simple endpoint checking (specifically, bulk and
> interrupt eps, testing control one is not essential) to mitigate
> the issue with a view to do other related cosmetic changes later,
> if they are necessary.
> 
> [...]

Here is the summary with links:
  - [net,v2] net: usb: rtl8150: enable basic endpoint checking
    https://git.kernel.org/netdev/net/c/90b7f2961798

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html