[PATCH 0/4] sm7325-nothing-spacewar: Preparing for the cameras

[PATCH 0/4] sm7325-nothing-spacewar: Preparing for the cameras

[Danila Tikhonov]

Nothing Phone (1) - sm7325-nothing-spacewar has three camera sensors:
- Wide sony,imx766
- Ultra wide samsung,s5kjn1
- Front sony,imx471
We tested the UW and Front cameras by hacking the IMX412 in our fork and
they work as expected. Wide is a C-PHY sensor, so unfortunately we haven't
tested it fully yet.

However, some of our work can already be upstreamed, so that's what we're
doing in this series.

To: Bartosz Golaszewski <brgl@bgdev.pl>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-i2c@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux@mainlining.org
Cc: ~postmarketos/upstreaming@lists.sr.ht
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>

Danila Tikhonov (4):
  arm64: dts: qcom: sm7325-nothing-spacewar: Add CAM fixed-regulators
  dt-bindings: eeprom: at24: Add compatible for Puya P24C64F
  dt-bindings: eeprom: at24: Add compatible for Giantec GT24P128E
  arm64: dts: qcom: sm7325-nothing-spacewar: Enable camera EEPROMs

 .../devicetree/bindings/eeprom/at24.yaml      |   5 +-
 .../boot/dts/qcom/sm7325-nothing-spacewar.dts | 157 +++++++++++++++++-
 2 files changed, 158 insertions(+), 4 deletions(-)

-- 
2.48.1

[PATCH 1/4] arm64: dts: qcom: sm7325-nothing-spacewar: Add CAM fixed-regulators

[Danila Tikhonov]

Two regulators (GPIO 72 & 107) for the IMX766 sensor are missing here.
Without a driver, it's unclear if they're extra supplies or pwdn/power
GPIOs (labeled "custom" in the downstream kernel).

So add only those fixed regulators that are currently predictable for
camera sensors, camera EEPROMs and camera actuators.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
---
 .../boot/dts/qcom/sm7325-nothing-spacewar.dts | 125 ++++++++++++++++++
 1 file changed, 125 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
index a5cda478bd78..4f964e5d34da 100644
--- a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
+++ b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
@@ -253,6 +253,124 @@ vph_pwr: vph-pwr-regulator {
 		regulator-max-microvolt = <3700000>;
 	};
 
+	vreg_cam_vio_1p8: regulator-cam-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_cam_vio_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* Always-on prevents CCI bus timeouts */
+		regulator-always-on;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camf_vana_2p8: regulator-camf-vana {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camf_vana_2p8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camf_vdig_1p1: regulator-camf-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camf_vdig_1p1";
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+
+		gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s8b_1p256>;
+	};
+
+	vreg_camu_vaf_1p8: regulator-camu-vaf {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camu_vaf_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 71 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camu_vana_2p8: regulator-camu-vana {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camu_vana_2p8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camu_vdig_1p1: regulator-camu-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camu_vdig_1p1";
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+
+		gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s8b_1p256>;
+	};
+
+	vreg_camw_vaf_1p8: regulator-camw-vaf {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camw_vaf_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camw_vana_2p8: regulator-camw-vana {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camw_vana_2p8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_bob>;
+	};
+
+	vreg_camw_vdig_1p1: regulator-camw-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_camw_vdig_1p1";
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+
+		gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s8b_1p256>;
+	};
+
 	// S2B is really ebi.lvl but it's there for supply map completeness sake.
 	vreg_s2b_0p7: smpa3-regulator {
 		compatible = "regulator-fixed";
@@ -714,6 +832,13 @@ vreg_bob: bob {
 };
 
 &cci0 {
+	/*
+	 * cci0_i2c1 bus is unused and GPIO 71&72 are repurposed.
+	 * So set only cci0_i2c0 pinctrl here.
+	 */
+	pinctrl-0 = <&cci0_default>;
+	pinctrl-1 = <&cci0_sleep>;
+
 	status = "okay";
 };
 
-- 
2.48.1

[PATCH 2/4] dt-bindings: eeprom: at24: Add compatible for Puya P24C64F

[Danila Tikhonov]

Add the compatible for another 64Kb EEPROM from Puya.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
---
 Documentation/devicetree/bindings/eeprom/at24.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index c9e4afbdc448..e7496ece8ae9 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -130,7 +130,9 @@ properties:
           - const: giantec,gt24c32a
           - const: atmel,24c32
       - items:
-          - const: onnn,n24s64b
+          - enum:
+              - onnn,n24s64b
+              - puya,p24c64f
           - const: atmel,24c64
       - items:
           - enum:
-- 
2.48.1

[PATCH 3/4] dt-bindings: eeprom: at24: Add compatible for Giantec GT24P128E

[Danila Tikhonov]

Add the compatible for another 128Kb EEPROM from Giantec.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
---
 Documentation/devicetree/bindings/eeprom/at24.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index e7496ece8ae9..0ac68646c077 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -136,6 +136,7 @@ properties:
           - const: atmel,24c64
       - items:
           - enum:
+              - giantec,gt24p128e
               - giantec,gt24p128f
               - renesas,r1ex24128
               - samsung,s524ad0xd1
-- 
2.48.1

[PATCH 4/4] arm64: dts: qcom: sm7325-nothing-spacewar: Enable camera EEPROMs

[Danila Tikhonov]

Configure the EEPROMs which are found on the different camera sensors on
this device.

The pull-up regulator for these I2C busses is vreg_cam_vio_1p8, the same
supply that powers VCC of all the EEPROMs.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
---
 .../boot/dts/qcom/sm7325-nothing-spacewar.dts | 32 +++++++++++++++++--
 1 file changed, 29 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
index 4f964e5d34da..0c89f7726865 100644
--- a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
+++ b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
@@ -843,7 +843,15 @@ &cci0 {
 };
 
 &cci0_i2c0 {
-	/* sony,imx471 (Front) */
+	/* D-PHY sony,imx471 (Front) @ 0x1a */
+
+	camf_p24c64f: eeprom@52 {
+		compatible = "puya,p24c64f",
+			     "atmel,24c64";
+		reg = <0x52>;
+		vcc-supply = <&vreg_cam_vio_1p8>;
+		read-only;
+	};
 };
 
 &cci1 {
@@ -851,11 +859,29 @@ &cci1 {
 };
 
 &cci1_i2c0 {
-	/* samsung,s5kjn1 (Rear-aux UW) */
+	/* actuator (For Ultra Wide sensor) @ 0xc */
+	/* D-PHY samsung,s5kjn1 (Ultra Wide) @ 0x2d */
+
+	camu_gt24p128e: eeprom@51 {
+		compatible = "giantec,gt24p128e",
+			     "atmel,24c128";
+		reg = <0x51>;
+		vcc-supply = <&vreg_cam_vio_1p8>;
+		read-only;
+	};
 };
 
 &cci1_i2c1 {
-	/* sony,imx766 (Rear Wide) */
+	/* actuator (For Wide sensor) @ 0xc */
+	/* C-PHY sony,imx766 (Wide) @ 0x10 */
+
+	camw_gt24p128e: eeprom@50 {
+		compatible = "giantec,gt24p128e",
+			     "atmel,24c128";
+		reg = <0x50>;
+		vcc-supply = <&vreg_cam_vio_1p8>;
+		read-only;
+	};
 };
 
 &gcc {
-- 
2.48.1

Re: [PATCH 2/4] dt-bindings: eeprom: at24: Add compatible for Puya P24C64F

[Rob Herring (Arm)]

On Mon, 03 Feb 2025 14:14:27 +0300, Danila Tikhonov wrote:
> Add the compatible for another 64Kb EEPROM from Puya.
> 
> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
> ---
>  Documentation/devicetree/bindings/eeprom/at24.yaml | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH 3/4] dt-bindings: eeprom: at24: Add compatible for Giantec GT24P128E

[Rob Herring (Arm)]

On Mon, 03 Feb 2025 14:14:28 +0300, Danila Tikhonov wrote:
> Add the compatible for another 128Kb EEPROM from Giantec.
> 
> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
> ---
>  Documentation/devicetree/bindings/eeprom/at24.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>

Re: (subset) [PATCH 0/4] sm7325-nothing-spacewar: Preparing for the cameras

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>


On Mon, 03 Feb 2025 14:14:25 +0300, Danila Tikhonov wrote:
> Nothing Phone (1) - sm7325-nothing-spacewar has three camera sensors:
> - Wide sony,imx766
> - Ultra wide samsung,s5kjn1
> - Front sony,imx471
> We tested the UW and Front cameras by hacking the IMX412 in our fork and
> they work as expected. Wide is a C-PHY sensor, so unfortunately we haven't
> tested it fully yet.
> 
> [...]

Applied, thanks!

[2/4] dt-bindings: eeprom: at24: Add compatible for Puya P24C64F
      commit: 78d9ee370ed33cd8b662981fe1f47cff7b4f0e43
[3/4] dt-bindings: eeprom: at24: Add compatible for Giantec GT24P128E
      commit: 03480898cefe9cb5ba921dba9304703f7574b687

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Re: (subset) [PATCH 0/4] sm7325-nothing-spacewar: Preparing for the cameras

[Bjorn Andersson]

On Mon, 03 Feb 2025 14:14:25 +0300, Danila Tikhonov wrote:
> Nothing Phone (1) - sm7325-nothing-spacewar has three camera sensors:
> - Wide sony,imx766
> - Ultra wide samsung,s5kjn1
> - Front sony,imx471
> We tested the UW and Front cameras by hacking the IMX412 in our fork and
> they work as expected. Wide is a C-PHY sensor, so unfortunately we haven't
> tested it fully yet.
> 
> [...]

Applied, thanks!

[1/4] arm64: dts: qcom: sm7325-nothing-spacewar: Add CAM fixed-regulators
      commit: 542b34247f3a5aeb4d094b21522803448005685a
[4/4] arm64: dts: qcom: sm7325-nothing-spacewar: Enable camera EEPROMs
      commit: 588a6d006d640fde038d794bbf8db99a2cc2646f

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>