[PATCH 0/4] Add USB2.0 PHY support for RZ/V2H(P) SoC

[PATCH 0/4] Add USB2.0 PHY support for RZ/V2H(P) SoC

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

This patch series introduces support for the USB2.0 PHY on the
Renesas RZ/V2H(P) SoC. It includes updates to the device tree
bindings and driver implementation.

Best regards,  
Prabhakar  

Lad Prabhakar (4):
  dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L
    family
  dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
  phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part
    number
  phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)

 .../bindings/phy/renesas,usb2-phy.yaml        |  8 +++-
 drivers/phy/renesas/phy-rcar-gen3-usb2.c      | 38 +++++++++++++++++--
 2 files changed, 41 insertions(+), 5 deletions(-)

-- 
2.49.0

[PATCH 1/4] dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

The RZ/G2L family requires two clocks for USB2 PHY, which are already
defined in the DTSI files. Add a constraint in the DT binding document
to ensure validation with `dtbs_check`.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
index af275cea3456..f8d15f239b18 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -107,6 +107,9 @@ allOf:
           contains:
             const: renesas,rzg2l-usb2-phy
     then:
+      properties:
+        clocks:
+          minItems: 2
       required:
         - resets
 
-- 
2.49.0

Re: [PATCH 1/4] dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family

[Rob Herring (Arm)]

On Mon, 14 Apr 2025 15:57:26 +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> The RZ/G2L family requires two clocks for USB2 PHY, which are already
> defined in the DTSI files. Add a constraint in the DT binding document
> to ensure validation with `dtbs_check`.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
>  Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH 2/4] dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Document USB2.0 phy bindings for RZ/V2H(P) ("R9A09gG57") SoC.

RZ/V2H(P) USB2.0 phy is similar to one found on the RZ/G2L SoC, but it
needs additional configuration to be done as compared RZ/G2L USB2.0 phy.
To handle this difference a SoC specific compat string is added for
RZ/V2H(P) SoC.

Like the RZ/G2L SoC, the RZ/V2H(P) USB2.0 PHY requires the `resets`
property and has two clocks.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
index f8d15f239b18..2822dce8d9f4 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -16,6 +16,7 @@ properties:
           - enum:
               - renesas,usb2-phy-r8a77470  # RZ/G1C
               - renesas,usb2-phy-r9a08g045 # RZ/G3S
+              - renesas,usb2-phy-r9a09g057 # RZ/V2H(P)
 
       - items:
           - enum:
@@ -105,7 +106,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: renesas,rzg2l-usb2-phy
+            enum:
+              - renesas,usb2-phy-r9a09g057
+              - renesas,rzg2l-usb2-phy
     then:
       properties:
         clocks:
-- 
2.49.0

Re: [PATCH 2/4] dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC

[Rob Herring (Arm)]

On Mon, 14 Apr 2025 15:57:27 +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Document USB2.0 phy bindings for RZ/V2H(P) ("R9A09gG57") SoC.
> 
> RZ/V2H(P) USB2.0 phy is similar to one found on the RZ/G2L SoC, but it
> needs additional configuration to be done as compared RZ/G2L USB2.0 phy.
> To handle this difference a SoC specific compat string is added for
> RZ/V2H(P) SoC.
> 
> Like the RZ/G2L SoC, the RZ/V2H(P) USB2.0 PHY requires the `resets`
> property and has two clocks.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
>  Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH 3/4] phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Reorder the compatible entries in `rcar_gen3_phy_usb2_match_table` to
maintain sorting based on SoC part numbers. Keep the entries ordered
numerically while ensuring the existing generic compatible strings
remain at the bottom.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 775f4f973a6c..10d1a89558be 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -606,14 +606,14 @@ static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 		.compatible = "renesas,usb2-phy-r8a77965",
 		.data = &rcar_gen3_phy_usb2_data,
 	},
-	{
-		.compatible = "renesas,rzg2l-usb2-phy",
-		.data = &rz_g2l_phy_usb2_data,
-	},
 	{
 		.compatible = "renesas,usb2-phy-r9a08g045",
 		.data = &rz_g3s_phy_usb2_data,
 	},
+	{
+		.compatible = "renesas,rzg2l-usb2-phy",
+		.data = &rz_g2l_phy_usb2_data,
+	},
 	{
 		.compatible = "renesas,rcar-gen3-usb2-phy",
 		.data = &rcar_gen3_phy_usb2_data,
-- 
2.49.0

[PATCH 4/4] phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Add USB2.0 PHY support for RZ/V2H(P) SoC.

On the RZ/V2H(P) SoC we need to configure the UTMI to a specific value
as compared to other SoCs (which doesn't need configuring it).

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 30 ++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 10d1a89558be..867f43132b7a 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -28,8 +28,10 @@
 #define USB2_INT_ENABLE		0x000
 #define USB2_AHB_BUS_CTR	0x008
 #define USB2_USBCTR		0x00c
+#define USB2_REGEN_CG_CTRL	0x104	/* RZ/V2H(P) only */
 #define USB2_SPD_RSM_TIMSET	0x10c
 #define USB2_OC_TIMSET		0x110
+#define USB2_UTMI_CTRL		0x118	/* RZ/V2H(P) only */
 #define USB2_COMMCTRL		0x600
 #define USB2_OBINTSTA		0x604
 #define USB2_OBINTEN		0x608
@@ -50,12 +52,18 @@
 #define USB2_USBCTR_DIRPD	BIT(2)
 #define USB2_USBCTR_PLL_RST	BIT(1)
 
+/* REGEN_CG_CTRL*/
+#define USB2_REGEN_CG_CTRL_UPHY_WEN	BIT(0)
+
 /* SPD_RSM_TIMSET */
 #define USB2_SPD_RSM_TIMSET_INIT	0x014e029b
 
 /* OC_TIMSET */
 #define USB2_OC_TIMSET_INIT		0x000209ab
 
+/* UTMI_CTRL */
+#define USB2_UTMI_CTRL_INIT		0x8000018f
+
 /* COMMCTRL */
 #define USB2_COMMCTRL_OTG_PERI		BIT(31)	/* 1 = Peripheral mode */
 
@@ -127,12 +135,14 @@ struct rcar_gen3_chan {
 	bool is_otg_channel;
 	bool uses_otg_pins;
 	bool soc_no_adp_ctrl;
+	bool utmi_ctrl;
 };
 
 struct rcar_gen3_phy_drv_data {
 	const struct phy_ops *phy_usb2_ops;
 	bool no_adp_ctrl;
 	bool init_bus;
+	bool utmi_ctrl;
 };
 
 /*
@@ -472,6 +482,14 @@ static int rcar_gen3_phy_usb2_init(struct phy *p)
 		rphy->otg_initialized = true;
 	}
 
+	if (channel->utmi_ctrl) {
+		val = readl(usb2_base + USB2_REGEN_CG_CTRL) | USB2_REGEN_CG_CTRL_UPHY_WEN;
+		writel(val, usb2_base + USB2_REGEN_CG_CTRL);
+
+		writel(USB2_UTMI_CTRL_INIT, usb2_base + USB2_UTMI_CTRL);
+		writel(val & ~USB2_REGEN_CG_CTRL_UPHY_WEN, usb2_base + USB2_REGEN_CG_CTRL);
+	}
+
 	rphy->initialized = true;
 
 	return 0;
@@ -589,6 +607,12 @@ static const struct rcar_gen3_phy_drv_data rz_g3s_phy_usb2_data = {
 	.init_bus = true,
 };
 
+static const struct rcar_gen3_phy_drv_data rz_v2h_phy_usb2_data = {
+	.phy_usb2_ops = &rcar_gen3_phy_usb2_ops,
+	.no_adp_ctrl = true,
+	.utmi_ctrl = true,
+};
+
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 	{
 		.compatible = "renesas,usb2-phy-r8a77470",
@@ -610,6 +634,10 @@ static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 		.compatible = "renesas,usb2-phy-r9a08g045",
 		.data = &rz_g3s_phy_usb2_data,
 	},
+	{
+		.compatible = "renesas,usb2-phy-r9a09g057",
+		.data = &rz_v2h_phy_usb2_data,
+	},
 	{
 		.compatible = "renesas,rzg2l-usb2-phy",
 		.data = &rz_g2l_phy_usb2_data,
@@ -763,6 +791,8 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	if (phy_data->no_adp_ctrl)
 		channel->obint_enable_bits = USB2_OBINT_IDCHG_EN;
 
+	channel->utmi_ctrl = phy_data->utmi_ctrl;
+
 	mutex_init(&channel->lock);
 	for (i = 0; i < NUM_OF_PHYS; i++) {
 		channel->rphys[i].phy = devm_phy_create(dev, NULL,
-- 
2.49.0

Re: [PATCH 0/4] Add USB2.0 PHY support for RZ/V2H(P) SoC

[Lad, Prabhakar]

Hi All,

On Mon, Apr 14, 2025 at 3:58 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
>
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> This patch series introduces support for the USB2.0 PHY on the
> Renesas RZ/V2H(P) SoC. It includes updates to the device tree
> bindings and driver implementation.
>
> Best regards,
> Prabhakar
>
> Lad Prabhakar (4):
>   dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L
>     family
>   dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
>   phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part
>     number
>   phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)
>
>  .../bindings/phy/renesas,usb2-phy.yaml        |  8 +++-
>  drivers/phy/renesas/phy-rcar-gen3-usb2.c      | 38 +++++++++++++++++--
>  2 files changed, 41 insertions(+), 5 deletions(-)
>
Gentle ping for review.

Cheers,
Prabhakar

Re: [PATCH 0/4] Add USB2.0 PHY support for RZ/V2H(P) SoC

[Vinod Koul]

On Mon, 14 Apr 2025 15:57:25 +0100, Prabhakar wrote:
> This patch series introduces support for the USB2.0 PHY on the
> Renesas RZ/V2H(P) SoC. It includes updates to the device tree
> bindings and driver implementation.
> 
> Best regards,
> Prabhakar
> 
> [...]

Applied, thanks!

[1/4] dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family
      commit: 31eebeef8cdd4c9bddc9d34053cab6553616d0b7
[2/4] dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
      commit: 9c4fbefc962dd13694b4a5051f432ed435c92220
[3/4] phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number
      commit: 9414ceb38a74470249dee69784d6079daa452c3a
[4/4] phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)
      commit: 3767474d7497a4d03f58118d02b742b903626d03

Best regards,
-- 
~Vinod