* [PATCH v6 0/4] qcom: Add support for IQ-9075-evk board
@ 2025-04-29 5:49 Wasim Nazir
2025-04-29 5:49 ` [PATCH v6 1/4] dt-bindings: arm: qcom: Add bindings for QCS9075 SOC based board Wasim Nazir
` (4 more replies)
0 siblings, 5 replies; 8+ messages in thread
From: Wasim Nazir @ 2025-04-29 5:49 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, kernel, kernel, Wasim Nazir
This series:
Add support for Qualcomm's iq9-evk board using QCS9075 SoC.
QCS9075 is compatible IoT-industrial grade variant of SA8775p SoC.
Unlike QCS9100, it doesn't have safety monitoring feature of
Safety-Island(SAIL) subsystem, which affects thermal management.
In QCS9100 SoC, the safety subsystem monitors all thermal sensors and
does corrective action for each subsystem based on sensor violation
to comply safety standards. But as QCS9075 is non-safe SoC it requires
conventional thermal mitigation for thermal management.
In this series thermal mitigation changes are not included as it needs
more discussion whether to include the change in DT or in drivers.
Below are detailed informations on IQ-9075-evk HW:
------------------------------------------------------
QCS9075M SoM is stacked on top of IQ-9075-evk board.
On top of IQ-9075-evk board additional mezzanine boards can be stacked
in future.
IQ-9075-evk is single board supporting these peripherals:
- Storage: 2 × 128 GB UFS, micro-SD card, EEPROMs for MACs,
eMMC on mezzanine card
- Audio/Video, Camera & Display ports
- Connectivity: RJ45 2.5GbE, WLAN/Bluetooth, CAN/CAN-FD
- Sensors: IMU
- PCIe ports
- USB & UART ports
Currently basic features are enabled to support 'boot to shell'.
---
Changelog:
v6:
- Splitting v5 and bringing only rb8/IQ-9075-evk changes.
- IQ-9075-evk is the new marketing/product name for RB8 and files are
renamed accordingly.
- Introduce SoM for qcs9075 SoC.
- Introduce Memory map changes for IQ9 boards, currently enabled
for qcs9075 based boards only.
- Remove l4c regulator as it needs more validation with UFS for
over-current check.
- Remove thermal mitigation change, needs more discussion for final
change.
- v5:
https://lore.kernel.org/all/20241229152332.3068172-1-quic_wasimn@quicinc.com/
Pratyush Brahma (1):
arm64: dts: qcom: iq9: Introduce new memory map for qcs9100/qcs9075
Wasim Nazir (3):
dt-bindings: arm: qcom: Add bindings for QCS9075 SOC based board
arm64: dts: qcom: qcs9075: Introduce QCS9075M SOM
arm64: dts: qcom: Add support for qcs9075 IQ-9075-EVK
.../devicetree/bindings/arm/qcom.yaml | 8 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/iq9-reserved-memory.dtsi | 108 +++++++
.../boot/dts/qcom/qcs9075-iq-9075-evk.dts | 268 ++++++++++++++++++
arch/arm64/boot/dts/qcom/qcs9075-som.dtsi | 10 +
5 files changed, 395 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/iq9-reserved-memory.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-iq-9075-evk.dts
create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-som.dtsi
base-commit: 33035b665157558254b3c21c3f049fd728e72368
--
2.49.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v6 1/4] dt-bindings: arm: qcom: Add bindings for QCS9075 SOC based board
2025-04-29 5:49 [PATCH v6 0/4] qcom: Add support for IQ-9075-evk board Wasim Nazir
@ 2025-04-29 5:49 ` Wasim Nazir
2025-04-30 6:33 ` Krzysztof Kozlowski
2025-04-29 5:49 ` [PATCH v6 2/4] arm64: dts: qcom: iq9: Introduce new memory map for qcs9100/qcs9075 Wasim Nazir
` (3 subsequent siblings)
4 siblings, 1 reply; 8+ messages in thread
From: Wasim Nazir @ 2025-04-29 5:49 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, kernel, kernel, Wasim Nazir
QCS9075 is compatible Industrial-IOT grade variant of SA8775p SOC.
Unlike QCS9100, it doesn't have safety monitoring feature of
Safety-Island(SAIL) subsystem, which affects thermal management.
QCS9075M SOM is based on QCS9075 SOC and also it has PMICs, DDR
along with memory-map updates.
qcs9075-iq-9075-evk board is based on QCS9075M SOM.
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 08c329b1e919..713d7b471883 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -58,6 +58,7 @@ description: |
qcs8550
qcm2290
qcm6490
+ qcs9075
qcs9100
qdu1000
qrb2210
@@ -960,6 +961,13 @@ properties:
- qcom,sa8775p-ride-r3
- const: qcom,sa8775p
+ - items:
+ - enum:
+ - qcom,qcs9075-iq-9075-evk
+ - const: qcom,qcs9075-som
+ - const: qcom,qcs9075
+ - const: qcom,sa8775p
+
- items:
- enum:
- qcom,qcs9100-ride
--
2.49.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v6 2/4] arm64: dts: qcom: iq9: Introduce new memory map for qcs9100/qcs9075
2025-04-29 5:49 [PATCH v6 0/4] qcom: Add support for IQ-9075-evk board Wasim Nazir
2025-04-29 5:49 ` [PATCH v6 1/4] dt-bindings: arm: qcom: Add bindings for QCS9075 SOC based board Wasim Nazir
@ 2025-04-29 5:49 ` Wasim Nazir
2025-04-29 5:49 ` [PATCH v6 3/4] arm64: dts: qcom: qcs9075: Introduce QCS9075M SOM Wasim Nazir
` (2 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: Wasim Nazir @ 2025-04-29 5:49 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, kernel, kernel,
Pratyush Brahma, Prakash Gupta, Wasim Nazir
From: Pratyush Brahma <quic_pbrahma@quicinc.com>
SA8775P has a memory map which caters to the auto specific requirements.
QCS9100 & QCS9075 are its IOT variants (with marketing name as IQ9) which
inherit the memory map of SA8775P require a slightly different memory
map as compared to SA8775P auto parts.
This new memory map is applicable for all the IoT boards which inherit
the initial SA8775P memory map. This is not applicable for non-IoT
boards.
Some new carveouts (viz. gunyah_md and a few pil dtb carveouts) have been
introduced as part of firmware updates for IoT. The size and base address
have been updated for video PIL carveout compared to SA8775P since it is
being brought up for the first time on IoT boards. The base addresses
of the rest of the PIL carveouts have been updated to accommodate the
change in size of video since PIL regions are relocatable and their
functionality is not impacted due to this change.
The size of trusted apps carveout has also been reduced since it is
sufficient to meet IoT requirements. Also, audio_mdf_mem & tz_ffi_mem
carveout and its corresponding scm reference has been removed as these
are not required for IoT parts.
Incorporate these changes in the updated memory map.
Signed-off-by: Pratyush Brahma <quic_pbrahma@quicinc.com>
Signed-off-by: Prakash Gupta <quic_guptap@quicinc.com>
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
---
.../boot/dts/qcom/iq9-reserved-memory.dtsi | 108 ++++++++++++++++++
1 file changed, 108 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/iq9-reserved-memory.dtsi
diff --git a/arch/arm64/boot/dts/qcom/iq9-reserved-memory.dtsi b/arch/arm64/boot/dts/qcom/iq9-reserved-memory.dtsi
new file mode 100644
index 000000000000..d5fb608b9462
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/iq9-reserved-memory.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/delete-node/ &pil_adsp_mem;
+/delete-node/ &pil_gdsp0_mem;
+/delete-node/ &pil_gdsp1_mem;
+/delete-node/ &pil_cdsp0_mem;
+/delete-node/ &pil_gpu_mem;
+/delete-node/ &pil_cdsp1_mem;
+/delete-node/ &pil_cvp_mem;
+/delete-node/ &pil_video_mem;
+/delete-node/ &audio_mdf_mem;
+/delete-node/ &trusted_apps_mem;
+/delete-node/ &hyptz_reserved_mem;
+/delete-node/ &tz_ffi_mem;
+
+/ {
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gunyah_md_mem: gunyah-md@91a80000 {
+ reg = <0x0 0x91a80000 0x0 0x80000>;
+ no-map;
+ };
+
+ pil_adsp_mem: pil-adsp@95900000 {
+ reg = <0x0 0x95900000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ q6_adsp_dtb_mem: q6-adsp-dtb@97700000 {
+ reg = <0x0 0x97700000 0x0 0x80000>;
+ no-map;
+ };
+
+ q6_gdsp0_dtb_mem: q6-gdsp0-dtb@97780000 {
+ reg = <0x0 0x97780000 0x0 0x80000>;
+ no-map;
+ };
+
+ pil_gdsp0_mem: pil-gdsp0@97800000 {
+ reg = <0x0 0x97800000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_gdsp1_mem: pil-gdsp1@99600000 {
+ reg = <0x0 0x99600000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ q6_gdsp1_dtb_mem: q6-gdsp1-dtb@9b400000 {
+ reg = <0x0 0x9b400000 0x0 0x80000>;
+ no-map;
+ };
+
+ q6_cdsp0_dtb_mem: q6-cdsp0-dtb@9b480000 {
+ reg = <0x0 0x9b480000 0x0 0x80000>;
+ no-map;
+ };
+
+ pil_cdsp0_mem: pil-cdsp0@9b500000 {
+ reg = <0x0 0x9b500000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_gpu_mem: pil-gpu@9d300000 {
+ reg = <0x0 0x9d300000 0x0 0x2000>;
+ no-map;
+ };
+
+ q6_cdsp1_dtb_mem: q6-cdsp1-dtb@9d380000 {
+ reg = <0x0 0x9d380000 0x0 0x80000>;
+ no-map;
+ };
+
+ pil_cdsp1_mem: pil-cdsp1@9d400000 {
+ reg = <0x0 0x9d400000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ pil_cvp_mem: pil-cvp@9f200000 {
+ reg = <0x0 0x9f200000 0x0 0x700000>;
+ no-map;
+ };
+
+ pil_video_mem: pil-video@9f900000 {
+ reg = <0x0 0x9f900000 0x0 0x1000000>;
+ no-map;
+ };
+
+ trusted_apps_mem: trusted-apps@d1900000 {
+ reg = <0x0 0xd1900000 0x0 0x1c00000>;
+ no-map;
+ };
+ };
+
+ firmware {
+ scm {
+ /delete-property/ memory-region;
+ };
+ };
+};
+
--
2.49.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v6 3/4] arm64: dts: qcom: qcs9075: Introduce QCS9075M SOM
2025-04-29 5:49 [PATCH v6 0/4] qcom: Add support for IQ-9075-evk board Wasim Nazir
2025-04-29 5:49 ` [PATCH v6 1/4] dt-bindings: arm: qcom: Add bindings for QCS9075 SOC based board Wasim Nazir
2025-04-29 5:49 ` [PATCH v6 2/4] arm64: dts: qcom: iq9: Introduce new memory map for qcs9100/qcs9075 Wasim Nazir
@ 2025-04-29 5:49 ` Wasim Nazir
2025-04-29 5:49 ` [PATCH v6 4/4] arm64: dts: qcom: Add support for qcs9075 IQ-9075-EVK Wasim Nazir
2025-04-29 14:44 ` [PATCH v6 0/4] qcom: Add support for IQ-9075-evk board Rob Herring (Arm)
4 siblings, 0 replies; 8+ messages in thread
From: Wasim Nazir @ 2025-04-29 5:49 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, kernel, kernel, Wasim Nazir
QCS9075 is an IoT variant of SA8775P SOC, most notably without
safety monitoring feature of Safety Island(SAIL) subsystem.
qcs9075-som.dtsi specifies QCS9075 based SOM having SOC, PMICs,
Memory-map updates.
qcs9075-iq-9075-evk board is based on QCS9075M SOM.
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
---
arch/arm64/boot/dts/qcom/qcs9075-som.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-som.dtsi
diff --git a/arch/arm64/boot/dts/qcom/qcs9075-som.dtsi b/arch/arm64/boot/dts/qcom/qcs9075-som.dtsi
new file mode 100644
index 000000000000..552e40c95e06
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs9075-som.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sa8775p.dtsi"
+#include "iq9-reserved-memory.dtsi"
+#include "sa8775p-pmics.dtsi"
--
2.49.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v6 4/4] arm64: dts: qcom: Add support for qcs9075 IQ-9075-EVK
2025-04-29 5:49 [PATCH v6 0/4] qcom: Add support for IQ-9075-evk board Wasim Nazir
` (2 preceding siblings ...)
2025-04-29 5:49 ` [PATCH v6 3/4] arm64: dts: qcom: qcs9075: Introduce QCS9075M SOM Wasim Nazir
@ 2025-04-29 5:49 ` Wasim Nazir
2025-05-08 15:40 ` Dmitry Baryshkov
2025-04-29 14:44 ` [PATCH v6 0/4] qcom: Add support for IQ-9075-evk board Rob Herring (Arm)
4 siblings, 1 reply; 8+ messages in thread
From: Wasim Nazir @ 2025-04-29 5:49 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, kernel, kernel, Wasim Nazir
Add initial device tree support for IQ-9075-EVK board,
based on Qualcomm's QCS9075M SOM. QCS9075M SOM is based on QCS9075 SOC.
Basic changes are supported for boot to shell.
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/qcs9075-iq-9075-evk.dts | 268 ++++++++++++++++++
2 files changed, 269 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-iq-9075-evk.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index adb4d026bcc4..6cca965d86e0 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -122,6 +122,7 @@ qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vis
dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-vision-mezzanine.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs9075-iq-9075-evk.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs9075-iq-9075-evk.dts b/arch/arm64/boot/dts/qcom/qcs9075-iq-9075-evk.dts
new file mode 100644
index 000000000000..eadc59739a4b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs9075-iq-9075-evk.dts
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024-2025, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "qcs9075-som.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IQ 9075 EVK";
+ compatible = "qcom,qcs9075-iq-9075-evk", "qcom,qcs9075-som", "qcom,qcs9075", "qcom,sa8775p";
+
+ aliases {
+ serial0 = &uart10;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_s4a: smps4 {
+ regulator-name = "vreg_s4a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1816000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5a: smps5 {
+ regulator-name = "vreg_s5a";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1996000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9a: smps9 {
+ regulator-name = "vreg_s9a";
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4a: ldo4 {
+ regulator-name = "vreg_l4a";
+ regulator-min-microvolt = <788000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a: ldo5 {
+ regulator-name = "vreg_l5a";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a: ldo6 {
+ regulator-name = "vreg_l6a";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a: ldo7 {
+ regulator-name = "vreg_l7a";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a: ldo8 {
+ regulator-name = "vreg_l8a";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a: ldo9 {
+ regulator-name = "vreg_l9a";
+ regulator-min-microvolt = <2970000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c: ldo3 {
+ regulator-name = "vreg_l3c";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c: ldo5 {
+ regulator-name = "vreg_l5c";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c: ldo6 {
+ regulator-name = "vreg_l6c";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c: ldo7 {
+ regulator-name = "vreg_l7c";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c: ldo8 {
+ regulator-name = "vreg_l8c";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c: ldo9 {
+ regulator-name = "vreg_l9c";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vreg_s4e: smps4 {
+ regulator-name = "vreg_s4e";
+ regulator-min-microvolt = <970000>;
+ regulator-max-microvolt = <1520000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s7e: smps7 {
+ regulator-name = "vreg_s7e";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9e: smps9 {
+ regulator-name = "vreg_s9e";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <570000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6e: ldo6 {
+ regulator-name = "vreg_l6e";
+ regulator-min-microvolt = <1280000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8e: ldo8 {
+ regulator-name = "vreg_l8e";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32768>;
+};
+
+&tlmm {
+ qup_uart10_default: qup-uart10-state {
+ pins = "gpio46", "gpio47";
+ function = "qup1_se3";
+ };
+};
+
+&uart10 {
+ compatible = "qcom,geni-debug-uart";
+ pinctrl-0 = <&qup_uart10_default>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <38400000>;
+};
--
2.49.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v6 0/4] qcom: Add support for IQ-9075-evk board
2025-04-29 5:49 [PATCH v6 0/4] qcom: Add support for IQ-9075-evk board Wasim Nazir
` (3 preceding siblings ...)
2025-04-29 5:49 ` [PATCH v6 4/4] arm64: dts: qcom: Add support for qcs9075 IQ-9075-EVK Wasim Nazir
@ 2025-04-29 14:44 ` Rob Herring (Arm)
4 siblings, 0 replies; 8+ messages in thread
From: Rob Herring (Arm) @ 2025-04-29 14:44 UTC (permalink / raw)
To: Wasim Nazir
Cc: linux-arm-msm, linux-kernel, kernel, Krzysztof Kozlowski, kernel,
Bjorn Andersson, devicetree, Konrad Dybcio, Conor Dooley
On Tue, 29 Apr 2025 11:19:00 +0530, Wasim Nazir wrote:
> This series:
>
> Add support for Qualcomm's iq9-evk board using QCS9075 SoC.
>
> QCS9075 is compatible IoT-industrial grade variant of SA8775p SoC.
> Unlike QCS9100, it doesn't have safety monitoring feature of
> Safety-Island(SAIL) subsystem, which affects thermal management.
>
> In QCS9100 SoC, the safety subsystem monitors all thermal sensors and
> does corrective action for each subsystem based on sensor violation
> to comply safety standards. But as QCS9075 is non-safe SoC it requires
> conventional thermal mitigation for thermal management.
> In this series thermal mitigation changes are not included as it needs
> more discussion whether to include the change in DT or in drivers.
>
> Below are detailed informations on IQ-9075-evk HW:
> ------------------------------------------------------
> QCS9075M SoM is stacked on top of IQ-9075-evk board.
> On top of IQ-9075-evk board additional mezzanine boards can be stacked
> in future.
> IQ-9075-evk is single board supporting these peripherals:
> - Storage: 2 × 128 GB UFS, micro-SD card, EEPROMs for MACs,
> eMMC on mezzanine card
> - Audio/Video, Camera & Display ports
> - Connectivity: RJ45 2.5GbE, WLAN/Bluetooth, CAN/CAN-FD
> - Sensors: IMU
> - PCIe ports
> - USB & UART ports
>
> Currently basic features are enabled to support 'boot to shell'.
>
> ---
> Changelog:
>
> v6:
> - Splitting v5 and bringing only rb8/IQ-9075-evk changes.
> - IQ-9075-evk is the new marketing/product name for RB8 and files are
> renamed accordingly.
> - Introduce SoM for qcs9075 SoC.
> - Introduce Memory map changes for IQ9 boards, currently enabled
> for qcs9075 based boards only.
> - Remove l4c regulator as it needs more validation with UFS for
> over-current check.
> - Remove thermal mitigation change, needs more discussion for final
> change.
> - v5:
> https://lore.kernel.org/all/20241229152332.3068172-1-quic_wasimn@quicinc.com/
>
> Pratyush Brahma (1):
> arm64: dts: qcom: iq9: Introduce new memory map for qcs9100/qcs9075
>
> Wasim Nazir (3):
> dt-bindings: arm: qcom: Add bindings for QCS9075 SOC based board
> arm64: dts: qcom: qcs9075: Introduce QCS9075M SOM
> arm64: dts: qcom: Add support for qcs9075 IQ-9075-EVK
>
> .../devicetree/bindings/arm/qcom.yaml | 8 +
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/iq9-reserved-memory.dtsi | 108 +++++++
> .../boot/dts/qcom/qcs9075-iq-9075-evk.dts | 268 ++++++++++++++++++
> arch/arm64/boot/dts/qcom/qcs9075-som.dtsi | 10 +
> 5 files changed, 395 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/iq9-reserved-memory.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-iq-9075-evk.dts
> create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-som.dtsi
>
>
> base-commit: 33035b665157558254b3c21c3f049fd728e72368
> --
> 2.49.0
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: using specified base-commit 33035b665157558254b3c21c3f049fd728e72368
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250429054906.113317-1-quic_wasimn@quicinc.com:
arch/arm64/boot/dts/qcom/qcs9075-iq-9075-evk.dtb: display-controller@ae01000 (qcom,sa8775p-dpu): clock-names:0: 'nrt_bus' was expected
from schema $id: http://devicetree.org/schemas/display/msm/qcom,sm8650-dpu.yaml#
arch/arm64/boot/dts/qcom/qcs9075-iq-9075-evk.dtb: rsc@18200000 (qcom,rpmh-rsc): 'power-domains' is a required property
from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml#
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v6 1/4] dt-bindings: arm: qcom: Add bindings for QCS9075 SOC based board
2025-04-29 5:49 ` [PATCH v6 1/4] dt-bindings: arm: qcom: Add bindings for QCS9075 SOC based board Wasim Nazir
@ 2025-04-30 6:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2025-04-30 6:33 UTC (permalink / raw)
To: Wasim Nazir
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel, kernel,
kernel
On Tue, Apr 29, 2025 at 11:19:01AM GMT, Wasim Nazir wrote:
> QCS9075 is compatible Industrial-IOT grade variant of SA8775p SOC.
> Unlike QCS9100, it doesn't have safety monitoring feature of
> Safety-Island(SAIL) subsystem, which affects thermal management.
>
> QCS9075M SOM is based on QCS9075 SOC and also it has PMICs, DDR
> along with memory-map updates.
>
> qcs9075-iq-9075-evk board is based on QCS9075M SOM.
>
> Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 8 ++++++++
> 1 file changed, 8 insertions(+)
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v6 4/4] arm64: dts: qcom: Add support for qcs9075 IQ-9075-EVK
2025-04-29 5:49 ` [PATCH v6 4/4] arm64: dts: qcom: Add support for qcs9075 IQ-9075-EVK Wasim Nazir
@ 2025-05-08 15:40 ` Dmitry Baryshkov
0 siblings, 0 replies; 8+ messages in thread
From: Dmitry Baryshkov @ 2025-05-08 15:40 UTC (permalink / raw)
To: Wasim Nazir
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel, kernel,
kernel
On Tue, Apr 29, 2025 at 11:19:04AM +0530, Wasim Nazir wrote:
> Add initial device tree support for IQ-9075-EVK board,
> based on Qualcomm's QCS9075M SOM. QCS9075M SOM is based on QCS9075 SOC.
>
> Basic changes are supported for boot to shell.
For v7 please include UFS support. 'Boot to sheel' as 'no storage' means
almost a useless board, which even can not boot the CI images.
>
> Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/qcs9075-iq-9075-evk.dts | 268 ++++++++++++++++++
> 2 files changed, 269 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-iq-9075-evk.dts
>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2025-05-08 15:40 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-04-29 5:49 [PATCH v6 0/4] qcom: Add support for IQ-9075-evk board Wasim Nazir
2025-04-29 5:49 ` [PATCH v6 1/4] dt-bindings: arm: qcom: Add bindings for QCS9075 SOC based board Wasim Nazir
2025-04-30 6:33 ` Krzysztof Kozlowski
2025-04-29 5:49 ` [PATCH v6 2/4] arm64: dts: qcom: iq9: Introduce new memory map for qcs9100/qcs9075 Wasim Nazir
2025-04-29 5:49 ` [PATCH v6 3/4] arm64: dts: qcom: qcs9075: Introduce QCS9075M SOM Wasim Nazir
2025-04-29 5:49 ` [PATCH v6 4/4] arm64: dts: qcom: Add support for qcs9075 IQ-9075-EVK Wasim Nazir
2025-05-08 15:40 ` Dmitry Baryshkov
2025-04-29 14:44 ` [PATCH v6 0/4] qcom: Add support for IQ-9075-evk board Rob Herring (Arm)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®