[PATCH v1] arm64: dts: exynosautov920: add cmu_hsi2 clock DT nodes

[PATCH v1] arm64: dts: exynosautov920: add cmu_hsi2 clock DT nodes

[Raghav Sharma]

Add required dt node for cmu_hsi2 block, which
provides clocks to ufs and ethernet IPs

Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynosautov920.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
index 2cb8041c8a9f..7890373f5da0 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
@@ -1048,6 +1048,23 @@ pinctrl_hsi1: pinctrl@16450000 {
 			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		cmu_hsi2: clock-controller@16b00000 {
+			compatible = "samsung,exynosautov920-cmu-hsi2";
+			reg = <0x16b00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_NOC>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_NOC_UFS>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_UFS_EMBD>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_ETHERNET>;
+			clock-names = "oscclk",
+				      "noc",
+				      "ufs",
+				      "embd",
+				      "ethernet";
+		};
+
 		pinctrl_hsi2: pinctrl@16c10000 {
 			compatible = "samsung,exynosautov920-pinctrl";
 			reg = <0x16c10000 0x10000>;
-- 
2.34.1

Re: [PATCH v1] arm64: dts: exynosautov920: add cmu_hsi2 clock DT nodes

[Rob Herring (Arm)]

On Fri, 09 May 2025 18:40:16 +0530, Raghav Sharma wrote:
> Add required dt node for cmu_hsi2 block, which
> provides clocks to ufs and ethernet IPs
> 
> Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
> ---
>  arch/arm64/boot/dts/exynos/exynosautov920.dtsi | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: attempting to guess base-commit...
 Base: tags/v6.15-rc1-6-gaa833db4b822 (exact match)

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/exynos/' for 20250509131016.3173048-1-raghav.s@samsung.com:

arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: /soc@0/clock-controller@16b00000: failed to match any schema with compatible: ['samsung,exynosautov920-cmu-hsi2']

[PATCH v1] arm64: dts: exynosautov920: add cmu_hsi2 clock DT nodes

[Raghav Sharma]

Add required dt node for cmu_hsi2 block, which
provides clocks to ufs and ethernet IPs

Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynosautov920.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
index 2cb8041c8a9f..7890373f5da0 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
@@ -1048,6 +1048,23 @@ pinctrl_hsi1: pinctrl@16450000 {
 			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		cmu_hsi2: clock-controller@16b00000 {
+			compatible = "samsung,exynosautov920-cmu-hsi2";
+			reg = <0x16b00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_NOC>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_NOC_UFS>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_UFS_EMBD>,
+				 <&cmu_top DOUT_CLKCMU_HSI2_ETHERNET>;
+			clock-names = "oscclk",
+				      "noc",
+				      "ufs",
+				      "embd",
+				      "ethernet";
+		};
+
 		pinctrl_hsi2: pinctrl@16c10000 {
 			compatible = "samsung,exynosautov920-pinctrl";
 			reg = <0x16c10000 0x10000>;
-- 
2.34.1