mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH 0/3] media: qcom: camss: Add qcs615 support
@ 2025-05-18  6:33 Wenmeng Liu
  2025-05-18  6:33 ` [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding Wenmeng Liu
                   ` (2 more replies)
  0 siblings, 3 replies; 24+ messages in thread
From: Wenmeng Liu @ 2025-05-18  6:33 UTC (permalink / raw)
  To: Robert Foss, Todor Tomov, Bryan O'Donoghue,
	Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Wenmeng Liu
  Cc: linux-arm-msm, linux-media, devicetree, linux-kernel

QCS615 is a Qualcomm flagship SoC. This series adds support to
bring up the CSIPHY, CSID, VFE/RDI interfaces in QCS615.

QCS615 provides

- 2 x VFE, 3 RDI per VFE
- 1 x VFE Lite, 4 RDI per VFE
- 2 x CSID
- 1 x CSID Lite
- 3 x CSI PHY

Tested this on QCS615 ADP AIR board with CSID TPG.

Tested with following commands:
media-ctl --reset
v4l2-ctl -d /dev/v4l-subdev3 -c test_pattern=0
media-ctl -V '"msm_csid0":0[fmt:SRGGB10/1920x1080 field:none]'
media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/1920x1080 field:none]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
v4l2-ctl -d /dev/v4l-subdev3 -c test_pattern=9
yavta -B capture-mplane -n 5 -f SRGGB10P -s 1920x1080 /dev/video0 --capture=7

---
This patch series depends on patch series:
https://lore.kernel.org/all/20250424-qcs615-mm-v7-clock-controllers-v8-0-bacad5b3659a@quicinc.com
---

Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>

---
Wenmeng Liu (3):
      dt-bindings: media: Add qcom,qcs615-camss binding
      media: qcom: camss: csiphy: Add 14nm CSIPHY 2ph DPHY v2.0.0 init sequence
      media: qcom: camss: Add qcs615 camss support

 .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
 .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     |  85 +++++
 drivers/media/platform/qcom/camss/camss-vfe.c      |   2 +
 drivers/media/platform/qcom/camss/camss.c          | 196 ++++++++++++
 drivers/media/platform/qcom/camss/camss.h          |   1 +
 5 files changed, 640 insertions(+)
---
base-commit: 3e324f3a60a8b7c484c46275be0897a0f5d7fc31
change-id: 20250518-qcs615_camss-f33d85f29e6f

Best regards,
-- 
Wenmeng Liu <quic_wenmliu@quicinc.com>


^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  6:33 [PATCH 0/3] media: qcom: camss: Add qcs615 support Wenmeng Liu
@ 2025-05-18  6:33 ` Wenmeng Liu
  2025-05-18  7:25   ` Rob Herring (Arm)
  2025-05-18  7:53   ` Dmitry Baryshkov
  2025-05-18  6:33 ` [PATCH 2/3] media: qcom: camss: csiphy: Add 14nm CSIPHY 2ph DPHY v2.0.0 init sequence Wenmeng Liu
  2025-05-18  6:33 ` [PATCH 3/3] media: qcom: camss: Add qcs615 camss support Wenmeng Liu
  2 siblings, 2 replies; 24+ messages in thread
From: Wenmeng Liu @ 2025-05-18  6:33 UTC (permalink / raw)
  To: Robert Foss, Todor Tomov, Bryan O'Donoghue,
	Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Wenmeng Liu
  Cc: linux-arm-msm, linux-media, devicetree, linux-kernel

Add bindings for qcom,qcs615-camss in order to support the camera
subsystem for qcs615.

Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
---
 .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
 1 file changed, 356 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/qcom,qcs615-camss.yaml b/Documentation/devicetree/bindings/media/qcom,qcs615-camss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..9a87243f88d4b739cc29033509878ae706d3017f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,qcs615-camss.yaml
@@ -0,0 +1,356 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,qcs615-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS615 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Wenmeng Liu <quic_wenmliu@quicinc.com>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,qcs615-camss
+
+  clocks:
+    minItems: 26
+    maxItems: 26
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: cphy_rx_src
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: gcc_axi_hf
+      - const: slow_ahb_src
+      - const: soc_ahb
+      - const: vfe0
+      - const: vfe0_axi
+      - const: vfe0_cphy_rx
+      - const: vfe0_csid
+      - const: vfe0_src
+      - const: vfe1
+      - const: vfe1_axi
+      - const: vfe1_cphy_rx
+      - const: vfe1_csid
+      - const: vfe1_src
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+      - const: vfe_lite_src
+
+  interrupts:
+    minItems: 9
+    maxItems: 9
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid_lite
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  iommus:
+    minItems: 3
+    maxItems: 3
+
+  interconnects:
+    minItems: 2
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: ahb
+      - const: hf_0_mnoc
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: top
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  reg:
+    minItems: 9
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid_lite
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interconnects
+  - interconnect-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,qcs615-camcc.h>
+    #include <dt-bindings/clock/qcom,qcs615-gcc.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss: camss@acb3000 {
+            compatible = "qcom,qcs615-camss";
+
+            reg = <0x0 0x0acb3000 0x0 0x1000>,
+                  <0x0 0x0acba000 0x0 0x1000>,
+                  <0x0 0x0acc8000 0x0 0x1000>,
+                  <0x0 0x0ac65000 0x0 0x1000>,
+                  <0x0 0x0ac66000 0x0 0x1000>,
+                  <0x0 0x0ac67000 0x0 0x1000>,
+                  <0x0 0x0acaf000 0x0 0x4000>,
+                  <0x0 0x0acb6000 0x0 0x4000>,
+                  <0x0 0x0acc4000 0x0 0x4000>;
+            reg-names = "csid0",
+                        "csid1",
+                        "csid_lite",
+                        "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "vfe0",
+                        "vfe1",
+                        "vfe_lite";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CPHY_RX_CLK_SRC>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                     <&camcc CAM_CC_SOC_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_0_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK_SRC>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_1_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK_SRC>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK_SRC>;
+
+            clock-names = "camnoc_axi",
+                          "cpas_ahb",
+                          "cphy_rx_src",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "gcc_axi_hf",
+                          "slow_ahb_src",
+                          "soc_ahb",
+                          "vfe0",
+                          "vfe0_axi",
+                          "vfe0_cphy_rx",
+                          "vfe0_csid",
+                          "vfe0_src",
+                          "vfe1",
+                          "vfe1_axi",
+                          "vfe1_cphy_rx",
+                          "vfe1_csid",
+                          "vfe1_src",
+                          "vfe_lite",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid",
+                          "vfe_lite_src";
+
+
+            interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+                            <&mmss_noc MASTER_CAMNOC_HF0 0 &mc_virt SLAVE_EBI1 0>;
+            interconnect-names = "ahb",
+                                 "hf_0_mnoc";
+
+            interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid_lite",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite";
+
+            iommus = <&apps_smmu 0x820 0x40>,
+                     <&apps_smmu 0x840 0x0>,
+                     <&apps_smmu 0x860 0x40>;
+
+            power-domains = <&camcc IFE_0_GDSC>,
+                            <&camcc IFE_1_GDSC>,
+                            <&camcc TITAN_TOP_GDSC>;
+
+            vdda-phy-supply = <&vreg_l5a_0p88>;
+            vdda-pll-supply = <&vreg_l12a_1p2>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };

-- 
2.34.1


^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCH 2/3] media: qcom: camss: csiphy: Add 14nm CSIPHY 2ph DPHY v2.0.0 init sequence
  2025-05-18  6:33 [PATCH 0/3] media: qcom: camss: Add qcs615 support Wenmeng Liu
  2025-05-18  6:33 ` [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding Wenmeng Liu
@ 2025-05-18  6:33 ` Wenmeng Liu
  2025-05-18  7:56   ` Dmitry Baryshkov
  2025-05-18  6:33 ` [PATCH 3/3] media: qcom: camss: Add qcs615 camss support Wenmeng Liu
  2 siblings, 1 reply; 24+ messages in thread
From: Wenmeng Liu @ 2025-05-18  6:33 UTC (permalink / raw)
  To: Robert Foss, Todor Tomov, Bryan O'Donoghue,
	Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Wenmeng Liu
  Cc: linux-arm-msm, linux-media, devicetree, linux-kernel

Add a PHY configuration sequence and PHY resource for the qcs615 which
uses a Qualcomm Gen 2 version 2.0.0 CSI-2 PHY.

Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
---
 .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     | 80 ++++++++++++++++++++++
 1 file changed, 80 insertions(+)

diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index f732a76de93e3e7b787d9553bf7f31e6c0596c58..3f3d875b8a74ee8f6585bebd29629bdb16eadb28 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -64,6 +64,86 @@ struct csiphy_lane_regs {
 	u32 csiphy_param_type;
 };
 
+/* GEN2 2.0 2PH DPHY mode */
+static const struct
+csiphy_lane_regs lane_regs_qcs615[] = {
+	{0x0030, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0034, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0028, 0x04, 0x00, CSIPHY_DNP_PARAMS},
+	{0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x001C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0000, 0xD7, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0004, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0020, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0008, 0x04, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+	{0x000C, 0xFF, 0x00, CSIPHY_DNP_PARAMS},
+	{0x0010, 0x50, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0038, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0060, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0064, 0x3F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0730, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x072C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0734, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0728, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x073C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x071C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0700, 0xC0, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0704, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0720, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0708, 0x04, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+	{0x070C, 0xFF, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0710, 0x50, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0738, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0760, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0764, 0x3F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0230, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x022C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0234, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0228, 0x04, 0x00, CSIPHY_DNP_PARAMS},
+	{0x023C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x021C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0200, 0xD7, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0204, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0220, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0208, 0x04, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+	{0x020C, 0xFF, 0x00, CSIPHY_DNP_PARAMS},
+	{0x0210, 0x50, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0238, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0260, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0264, 0x3F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0430, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0434, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0428, 0x04, 0x00, CSIPHY_DNP_PARAMS},
+	{0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x041C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0400, 0xD7, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0404, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0420, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0408, 0x04, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+	{0x040C, 0xFF, 0x00, CSIPHY_DNP_PARAMS},
+	{0x0410, 0x50, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0438, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0460, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0464, 0x3F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0630, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x062C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0634, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0628, 0x04, 0x00, CSIPHY_DNP_PARAMS},
+	{0x063C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x061C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0600, 0xD7, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0604, 0x08, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0620, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0608, 0x04, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+	{0x060C, 0xFF, 0x00, CSIPHY_DNP_PARAMS},
+	{0x0610, 0x50, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0638, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0660, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+	{0x0664, 0x3F, 0x00, CSIPHY_DEFAULT_PARAMS},
+};
+
 /* GEN2 1.0 2PH */
 static const struct
 csiphy_lane_regs lane_regs_sdm845[] = {

-- 
2.34.1


^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCH 3/3] media: qcom: camss: Add qcs615 camss support
  2025-05-18  6:33 [PATCH 0/3] media: qcom: camss: Add qcs615 support Wenmeng Liu
  2025-05-18  6:33 ` [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding Wenmeng Liu
  2025-05-18  6:33 ` [PATCH 2/3] media: qcom: camss: csiphy: Add 14nm CSIPHY 2ph DPHY v2.0.0 init sequence Wenmeng Liu
@ 2025-05-18  6:33 ` Wenmeng Liu
  2025-05-18  8:00   ` Dmitry Baryshkov
  2 siblings, 1 reply; 24+ messages in thread
From: Wenmeng Liu @ 2025-05-18  6:33 UTC (permalink / raw)
  To: Robert Foss, Todor Tomov, Bryan O'Donoghue,
	Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Wenmeng Liu
  Cc: linux-arm-msm, linux-media, devicetree, linux-kernel

Populate CAMSS with qcs615 specific hooks.

Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
---
 .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     |   5 +
 drivers/media/platform/qcom/camss/camss-vfe.c      |   2 +
 drivers/media/platform/qcom/camss/camss.c          | 196 +++++++++++++++++++++
 drivers/media/platform/qcom/camss/camss.h          |   1 +
 4 files changed, 204 insertions(+)

diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index 3f3d875b8a74ee8f6585bebd29629bdb16eadb28..3b58b938ad419b6d482314e23b4f51aae5f8a59e 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -824,6 +824,7 @@ static bool csiphy_is_gen2(u32 version)
 	bool ret = false;
 
 	switch (version) {
+	case CAMSS_615:
 	case CAMSS_7280:
 	case CAMSS_8250:
 	case CAMSS_8280XP:
@@ -905,6 +906,10 @@ static int csiphy_init(struct csiphy_device *csiphy)
 	regs->offset = 0x800;
 
 	switch (csiphy->camss->res->version) {
+	case CAMSS_615:
+		regs->lane_regs = &lane_regs_qcs615[0];
+		regs->lane_array_size = ARRAY_SIZE(lane_regs_qcs615);
+		break;
 	case CAMSS_845:
 		regs->lane_regs = &lane_regs_sdm845[0];
 		regs->lane_array_size = ARRAY_SIZE(lane_regs_sdm845);
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 4bca6c3abaff9b898ea879674a3ff8f3592d3139..145b27cde8b6f76d44893b5c1bd9211a81b10ff5 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -339,6 +339,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
 			return sink_code;
 		}
 		break;
+	case CAMSS_615:
 	case CAMSS_660:
 	case CAMSS_7280:
 	case CAMSS_8x96:
@@ -1969,6 +1970,7 @@ static int vfe_bpl_align(struct vfe_device *vfe)
 	int ret = 8;
 
 	switch (vfe->camss->res->version) {
+	case CAMSS_615:
 	case CAMSS_7280:
 	case CAMSS_8250:
 	case CAMSS_8280XP:
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 06f42875702f02f9d8d83d06ddaa972eacb593f8..29c5c3a9554e8a25eadc2c2df8108d99c65708c6 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -515,6 +515,187 @@ static const struct camss_subdev_resources vfe_res_8x96[] = {
 	}
 };
 
+static const struct camss_subdev_resources csiphy_res_615[] = {
+	/* CSIPHY0 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "csiphy0", "csiphy0_timer" },
+		.clock_rate = { { 269333333, 384000000 },
+				{ 269333333 } },
+		.reg = { "csiphy0" },
+		.interrupt = { "csiphy0" },
+		.csiphy = {
+			.id = 0,
+			.hw_ops = &csiphy_ops_3ph_1_0,
+			.formats = &csiphy_formats_sdm845
+		}
+	},
+	/* CSIPHY1 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "csiphy1", "csiphy1_timer" },
+		.clock_rate = { { 269333333, 384000000 },
+				{ 269333333 } },
+		.reg = { "csiphy1" },
+		.interrupt = { "csiphy1" },
+		.csiphy = {
+			.id = 1,
+			.hw_ops = &csiphy_ops_3ph_1_0,
+			.formats = &csiphy_formats_sdm845
+		}
+	},
+	/* CSIPHY2 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "csiphy2", "csiphy2_timer" },
+		.clock_rate = { { 269333333, 384000000 },
+				{ 269333333 } },
+		.reg = { "csiphy2" },
+		.interrupt = { "csiphy2" },
+		.csiphy = {
+			.id = 2,
+			.hw_ops = &csiphy_ops_3ph_1_0,
+			.formats = &csiphy_formats_sdm845
+		}
+	},
+};
+
+static const struct camss_subdev_resources csid_res_615[] = {
+	/* CSID0 */
+	{
+		.regulators = {},
+		.clock = {  "cphy_rx_src", "vfe0_cphy_rx", "vfe0_csid" },
+		.clock_rate = { { 269333333, 384000000 },
+				{ 269333333, 384000000 },
+				{ 320000000, 540000000 } },
+		.reg = { "csid0" },
+		.interrupt = { "csid0" },
+		.csid = {
+			.is_lite = false,
+			.hw_ops = &csid_ops_gen2,
+			.parent_dev_ops = &vfe_parent_dev_ops,
+			.formats = &csid_formats_gen2
+		}
+	},
+	/* CSID1 */
+	{
+		.regulators = {},
+		.clock = {  "cphy_rx_src", "vfe1_cphy_rx", "vfe1_csid" },
+		.clock_rate = { { 269333333, 384000000 },
+				{ 269333333, 384000000 },
+				{ 320000000, 540000000 } },
+		.reg = { "csid1" },
+		.interrupt = { "csid1" },
+		.csid = {
+			.is_lite = false,
+			.hw_ops = &csid_ops_gen2,
+			.parent_dev_ops = &vfe_parent_dev_ops,
+			.formats = &csid_formats_gen2
+		}
+	},
+	/* CSID2 */
+	{
+		.regulators = {},
+		.clock = {  "cphy_rx_src", "vfe_lite_cphy_rx", "vfe_lite_csid" },
+		.clock_rate = { { 269333333, 384000000 },
+				{ 269333333, 384000000 },
+				{ 320000000, 540000000 } },
+		.reg = { "csid_lite" },
+		.interrupt = { "csid_lite" },
+		.csid = {
+			.is_lite = true,
+			.hw_ops = &csid_ops_gen2,
+			.parent_dev_ops = &vfe_parent_dev_ops,
+			.formats = &csid_formats_gen2
+		}
+	},
+};
+
+static const struct camss_subdev_resources vfe_res_615[] = {
+	/* VFE0 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "camnoc_axi", "cpas_ahb", "slow_ahb_src",
+			   "soc_ahb", "vfe0", "vfe0_axi"},
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 80000000 },
+				{ 80000000 },
+				{ 37500000, 40000000 },
+				{ 360000000, 432000000, 540000000, 600000000 },
+				{ 265000000, 426000000 } },
+		.reg = { "vfe0" },
+		.interrupt = { "vfe0" },
+		.vfe = {
+			.line_num = 3,
+			.is_lite = false,
+			.has_pd = true,
+			.pd_name = "ife0",
+			.hw_ops = &vfe_ops_170,
+			.formats_rdi = &vfe_formats_rdi_845,
+			.formats_pix = &vfe_formats_pix_845
+		}
+	},
+	/* VFE1 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "camnoc_axi", "cpas_ahb", "slow_ahb_src",
+			   "soc_ahb", "vfe1", "vfe1_axi"},
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 80000000 },
+				{ 80000000 },
+				{ 37500000, 40000000 },
+				{ 360000000, 432000000, 540000000, 600000000 },
+				{ 265000000, 426000000 } },
+		.reg = { "vfe1" },
+		.interrupt = { "vfe1" },
+		.vfe = {
+			.line_num = 3,
+			.is_lite = false,
+			.has_pd = true,
+			.pd_name = "ife1",
+			.hw_ops = &vfe_ops_170,
+			.formats_rdi = &vfe_formats_rdi_845,
+			.formats_pix = &vfe_formats_pix_845
+		}
+	},
+	/* VFE2 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "camnoc_axi", "cpas_ahb", "slow_ahb_src",
+			   "soc_ahb", "vfe_lite" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 80000000 },
+				{ 80000000 },
+				{ 37500000, 40000000 },
+				{ 360000000, 432000000, 540000000, 600000000 } },
+		.reg = { "vfe_lite" },
+		.interrupt = { "vfe_lite" },
+		.vfe = {
+			.line_num = 4,
+			.is_lite = true,
+			.hw_ops = &vfe_ops_170,
+			.formats_rdi = &vfe_formats_rdi_845,
+			.formats_pix = &vfe_formats_pix_845
+		}
+	},
+};
+
+static const struct resources_icc icc_res_qcs615[] = {
+	{
+		.name = "ahb",
+		.icc_bw_tbl.avg = 38400,
+		.icc_bw_tbl.peak = 76800,
+	},
+	{
+		.name = "hf_0_mnoc",
+		.icc_bw_tbl.avg = 2097152,
+		.icc_bw_tbl.peak = 2097152,
+	},
+};
+
 static const struct camss_subdev_resources csiphy_res_660[] = {
 	/* CSIPHY0 */
 	{
@@ -3753,6 +3934,20 @@ static const struct camss_resources msm8996_resources = {
 	.link_entities = camss_link_entities
 };
 
+static const struct camss_resources qcs615_resources = {
+	.version = CAMSS_615,
+	.pd_name = "top",
+	.csiphy_res = csiphy_res_615,
+	.csid_res = csid_res_615,
+	.vfe_res = vfe_res_615,
+	.icc_res = icc_res_qcs615,
+	.icc_path_num = ARRAY_SIZE(icc_res_qcs615),
+	.csiphy_num = ARRAY_SIZE(csiphy_res_615),
+	.csid_num = ARRAY_SIZE(csid_res_615),
+	.vfe_num = ARRAY_SIZE(vfe_res_615),
+	.link_entities = camss_link_entities
+};
+
 static const struct camss_resources sdm660_resources = {
 	.version = CAMSS_660,
 	.csiphy_res = csiphy_res_660,
@@ -3865,6 +4060,7 @@ static const struct of_device_id camss_dt_match[] = {
 	{ .compatible = "qcom,msm8916-camss", .data = &msm8916_resources },
 	{ .compatible = "qcom,msm8953-camss", .data = &msm8953_resources },
 	{ .compatible = "qcom,msm8996-camss", .data = &msm8996_resources },
+	{ .compatible = "qcom,qcs615-camss", .data = &qcs615_resources },
 	{ .compatible = "qcom,sc7280-camss", .data = &sc7280_resources },
 	{ .compatible = "qcom,sc8280xp-camss", .data = &sc8280xp_resources },
 	{ .compatible = "qcom,sdm660-camss", .data = &sdm660_resources },
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index 63c0afee154a02194820016ccf554620d6521c8b..04e2359fccd5f61b27692caadf2855a1fde31ed9 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -77,6 +77,7 @@ enum pm_domain {
 };
 
 enum camss_version {
+	CAMSS_615,
 	CAMSS_660,
 	CAMSS_7280,
 	CAMSS_8x16,

-- 
2.34.1


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  6:33 ` [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding Wenmeng Liu
@ 2025-05-18  7:25   ` Rob Herring (Arm)
  2025-05-18  8:26     ` Rob Herring (Arm)
                       ` (15 more replies)
  2025-05-18  7:53   ` Dmitry Baryshkov
  1 sibling, 16 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-18  7:25 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  6:33 ` [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding Wenmeng Liu
  2025-05-18  7:25   ` Rob Herring (Arm)
@ 2025-05-18  7:53   ` Dmitry Baryshkov
  1 sibling, 0 replies; 24+ messages in thread
From: Dmitry Baryshkov @ 2025-05-18  7:53 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: Robert Foss, Todor Tomov, Bryan O'Donoghue,
	Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, linux-arm-msm, linux-media, devicetree,
	linux-kernel

On Sun, May 18, 2025 at 02:33:07PM +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/qcom,qcs615-camss.yaml b/Documentation/devicetree/bindings/media/qcom,qcs615-camss.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..9a87243f88d4b739cc29033509878ae706d3017f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,qcs615-camss.yaml
> @@ -0,0 +1,356 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,qcs615-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm QCS615 Camera Subsystem (CAMSS)
> +

[...]

> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/clock/qcom,qcs615-camcc.h>
> +    #include <dt-bindings/clock/qcom,qcs615-gcc.h>

Could you please update internal guidelines: when adding support for new
hardware, don't use bindings for clock controllers, use ephemeral clocks
instead. See below.

> +    #include <dt-bindings/interconnect/qcom,icc.h>
> +    #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +
> +            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
> +                     <&camcc CAM_CC_CPAS_AHB_CLK>,


So this can become <&camcc_camnoc_axi_clk>, <&camnoc_cpas_ahb_clk>, etc.

> +                     <&camcc CAM_CC_CPHY_RX_CLK_SRC>,

-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 2/3] media: qcom: camss: csiphy: Add 14nm CSIPHY 2ph DPHY v2.0.0 init sequence
  2025-05-18  6:33 ` [PATCH 2/3] media: qcom: camss: csiphy: Add 14nm CSIPHY 2ph DPHY v2.0.0 init sequence Wenmeng Liu
@ 2025-05-18  7:56   ` Dmitry Baryshkov
  0 siblings, 0 replies; 24+ messages in thread
From: Dmitry Baryshkov @ 2025-05-18  7:56 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: Robert Foss, Todor Tomov, Bryan O'Donoghue,
	Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, linux-arm-msm, linux-media, devicetree,
	linux-kernel

On Sun, May 18, 2025 at 02:33:08PM +0800, Wenmeng Liu wrote:
> Add a PHY configuration sequence and PHY resource for the qcs615 which
> uses a Qualcomm Gen 2 version 2.0.0 CSI-2 PHY.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     | 80 ++++++++++++++++++++++
>  1 file changed, 80 insertions(+)
> 
> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> index f732a76de93e3e7b787d9553bf7f31e6c0596c58..3f3d875b8a74ee8f6585bebd29629bdb16eadb28 100644
> --- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> +++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> @@ -64,6 +64,86 @@ struct csiphy_lane_regs {
>  	u32 csiphy_param_type;
>  };
>  
> +/* GEN2 2.0 2PH DPHY mode */
> +static const struct
> +csiphy_lane_regs lane_regs_qcs615[] = {

You are adding an object without no references. Most likely it will
trigger "unused" warning. Please also reference it from csiphy_init() in
the same commit.

> +	{0x0030, 0x02, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},

Lowercase hex.

> +	{0x0034, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
> +	{0x0028, 0x04, 0x00, CSIPHY_DNP_PARAMS},

-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 3/3] media: qcom: camss: Add qcs615 camss support
  2025-05-18  6:33 ` [PATCH 3/3] media: qcom: camss: Add qcs615 camss support Wenmeng Liu
@ 2025-05-18  8:00   ` Dmitry Baryshkov
  0 siblings, 0 replies; 24+ messages in thread
From: Dmitry Baryshkov @ 2025-05-18  8:00 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: Robert Foss, Todor Tomov, Bryan O'Donoghue,
	Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, linux-arm-msm, linux-media, devicetree,
	linux-kernel

On Sun, May 18, 2025 at 02:33:09PM +0800, Wenmeng Liu wrote:
> Populate CAMSS with qcs615 specific hooks.

QCS615

> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     |   5 +
>  drivers/media/platform/qcom/camss/camss-vfe.c      |   2 +
>  drivers/media/platform/qcom/camss/camss.c          | 196 +++++++++++++++++++++
>  drivers/media/platform/qcom/camss/camss.h          |   1 +
>  4 files changed, 204 insertions(+)
> 
> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> index 3f3d875b8a74ee8f6585bebd29629bdb16eadb28..3b58b938ad419b6d482314e23b4f51aae5f8a59e 100644
> --- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> +++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> @@ -824,6 +824,7 @@ static bool csiphy_is_gen2(u32 version)
>  	bool ret = false;
>  
>  	switch (version) {
> +	case CAMSS_615:
>  	case CAMSS_7280:
>  	case CAMSS_8250:
>  	case CAMSS_8280XP:
> @@ -905,6 +906,10 @@ static int csiphy_init(struct csiphy_device *csiphy)
>  	regs->offset = 0x800;
>  
>  	switch (csiphy->camss->res->version) {
> +	case CAMSS_615:
> +		regs->lane_regs = &lane_regs_qcs615[0];
> +		regs->lane_array_size = ARRAY_SIZE(lane_regs_qcs615);
> +		break;
>  	case CAMSS_845:
>  		regs->lane_regs = &lane_regs_sdm845[0];
>  		regs->lane_array_size = ARRAY_SIZE(lane_regs_sdm845);

This definitely should be a part of the previous commit.


> diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
> index 63c0afee154a02194820016ccf554620d6521c8b..04e2359fccd5f61b27692caadf2855a1fde31ed9 100644
> --- a/drivers/media/platform/qcom/camss/camss.h
> +++ b/drivers/media/platform/qcom/camss/camss.h
> @@ -77,6 +77,7 @@ enum pm_domain {
>  };
>  
>  enum camss_version {
> +	CAMSS_615,
>  	CAMSS_660,
>  	CAMSS_7280,
>  	CAMSS_8x16,

And, as a dependency, this chunk.

-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
@ 2025-05-18  8:26     ` Rob Herring (Arm)
  2025-05-18  9:26     ` Rob Herring (Arm)
                       ` (14 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-18  8:26 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
  2025-05-18  8:26     ` Rob Herring (Arm)
@ 2025-05-18  9:26     ` Rob Herring (Arm)
  2025-05-18 19:29     ` Rob Herring (Arm)
                       ` (13 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-18  9:26 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
  2025-05-18  8:26     ` Rob Herring (Arm)
  2025-05-18  9:26     ` Rob Herring (Arm)
@ 2025-05-18 19:29     ` Rob Herring (Arm)
  2025-05-19  0:00     ` Rob Herring (Arm)
                       ` (12 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-18 19:29 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (2 preceding siblings ...)
  2025-05-18 19:29     ` Rob Herring (Arm)
@ 2025-05-19  0:00     ` Rob Herring (Arm)
  2025-05-19  0:31     ` Rob Herring (Arm)
                       ` (11 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19  0:00 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (3 preceding siblings ...)
  2025-05-19  0:00     ` Rob Herring (Arm)
@ 2025-05-19  0:31     ` Rob Herring (Arm)
  2025-05-19  3:16     ` Rob Herring (Arm)
                       ` (10 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19  0:31 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (4 preceding siblings ...)
  2025-05-19  0:31     ` Rob Herring (Arm)
@ 2025-05-19  3:16     ` Rob Herring (Arm)
  2025-05-19  4:32     ` Rob Herring (Arm)
                       ` (9 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19  3:16 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (5 preceding siblings ...)
  2025-05-19  3:16     ` Rob Herring (Arm)
@ 2025-05-19  4:32     ` Rob Herring (Arm)
  2025-05-19  6:32     ` Rob Herring (Arm)
                       ` (8 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19  4:32 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (6 preceding siblings ...)
  2025-05-19  4:32     ` Rob Herring (Arm)
@ 2025-05-19  6:32     ` Rob Herring (Arm)
  2025-05-19  7:18     ` Rob Herring (Arm)
                       ` (7 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19  6:32 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (7 preceding siblings ...)
  2025-05-19  6:32     ` Rob Herring (Arm)
@ 2025-05-19  7:18     ` Rob Herring (Arm)
  2025-05-19  8:18     ` Rob Herring (Arm)
                       ` (6 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19  7:18 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (8 preceding siblings ...)
  2025-05-19  7:18     ` Rob Herring (Arm)
@ 2025-05-19  8:18     ` Rob Herring (Arm)
  2025-05-19  9:18     ` Rob Herring (Arm)
                       ` (5 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19  8:18 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (9 preceding siblings ...)
  2025-05-19  8:18     ` Rob Herring (Arm)
@ 2025-05-19  9:18     ` Rob Herring (Arm)
  2025-05-19  9:34     ` Rob Herring (Arm)
                       ` (4 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19  9:18 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (10 preceding siblings ...)
  2025-05-19  9:18     ` Rob Herring (Arm)
@ 2025-05-19  9:34     ` Rob Herring (Arm)
  2025-05-19  9:49     ` Rob Herring (Arm)
                       ` (3 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19  9:34 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (11 preceding siblings ...)
  2025-05-19  9:34     ` Rob Herring (Arm)
@ 2025-05-19  9:49     ` Rob Herring (Arm)
  2025-05-19 10:34     ` Rob Herring (Arm)
                       ` (2 subsequent siblings)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19  9:49 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (12 preceding siblings ...)
  2025-05-19  9:49     ` Rob Herring (Arm)
@ 2025-05-19 10:34     ` Rob Herring (Arm)
  2025-05-19 11:19     ` Rob Herring (Arm)
  2025-05-19 11:35     ` Rob Herring (Arm)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19 10:34 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (13 preceding siblings ...)
  2025-05-19 10:34     ` Rob Herring (Arm)
@ 2025-05-19 11:19     ` Rob Herring (Arm)
  2025-05-19 11:35     ` Rob Herring (Arm)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19 11:19 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding
  2025-05-18  7:25   ` Rob Herring (Arm)
                       ` (14 preceding siblings ...)
  2025-05-19 11:19     ` Rob Herring (Arm)
@ 2025-05-19 11:35     ` Rob Herring (Arm)
  15 siblings, 0 replies; 24+ messages in thread
From: Rob Herring (Arm) @ 2025-05-19 11:35 UTC (permalink / raw)
  To: Wenmeng Liu
  Cc: linux-media, Robert Foss, Conor Dooley, devicetree,
	Krzysztof Kozlowski, linux-arm-msm, Bryan O'Donoghue,
	Todor Tomov, linux-kernel, Mauro Carvalho Chehab


On Sun, 18 May 2025 14:33:07 +0800, Wenmeng Liu wrote:
> Add bindings for qcom,qcs615-camss in order to support the camera
> subsystem for qcs615.
> 
> Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
> ---
>  .../bindings/media/qcom,qcs615-camss.yaml          | 356 +++++++++++++++++++++
>  1 file changed, 356 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dts:25:18: fatal error: dt-bindings/clock/qcom,qcs615-camcc.h: No such file or directory
   25 |         #include <dt-bindings/clock/qcom,qcs615-camcc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/media/qcom,qcs615-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1524: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250518-qcs615_camss-v1-1-12723e26ea3e@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


^ permalink raw reply	[flat|nested] 24+ messages in thread

end of thread, other threads:[~2025-05-19 11:35 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-05-18  6:33 [PATCH 0/3] media: qcom: camss: Add qcs615 support Wenmeng Liu
2025-05-18  6:33 ` [PATCH 1/3] dt-bindings: media: Add qcom,qcs615-camss binding Wenmeng Liu
2025-05-18  7:25   ` Rob Herring (Arm)
2025-05-18  8:26     ` Rob Herring (Arm)
2025-05-18  9:26     ` Rob Herring (Arm)
2025-05-18 19:29     ` Rob Herring (Arm)
2025-05-19  0:00     ` Rob Herring (Arm)
2025-05-19  0:31     ` Rob Herring (Arm)
2025-05-19  3:16     ` Rob Herring (Arm)
2025-05-19  4:32     ` Rob Herring (Arm)
2025-05-19  6:32     ` Rob Herring (Arm)
2025-05-19  7:18     ` Rob Herring (Arm)
2025-05-19  8:18     ` Rob Herring (Arm)
2025-05-19  9:18     ` Rob Herring (Arm)
2025-05-19  9:34     ` Rob Herring (Arm)
2025-05-19  9:49     ` Rob Herring (Arm)
2025-05-19 10:34     ` Rob Herring (Arm)
2025-05-19 11:19     ` Rob Herring (Arm)
2025-05-19 11:35     ` Rob Herring (Arm)
2025-05-18  7:53   ` Dmitry Baryshkov
2025-05-18  6:33 ` [PATCH 2/3] media: qcom: camss: csiphy: Add 14nm CSIPHY 2ph DPHY v2.0.0 init sequence Wenmeng Liu
2025-05-18  7:56   ` Dmitry Baryshkov
2025-05-18  6:33 ` [PATCH 3/3] media: qcom: camss: Add qcs615 camss support Wenmeng Liu
2025-05-18  8:00   ` Dmitry Baryshkov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®