[PATCH] regulator: rt6160: Add rt6166 vout min_uV setting for compatible

[PATCH] regulator: rt6160: Add rt6166 vout min_uV setting for compatible

[jeff_chang]

From: Jeff Chang <jeff_chang@richtek.com>

1. remove unintentional GPL change
2. using switch case for Device ID probe check.

Signed-off-by: Jeff Chang <jeff_chang@richtek.com>
---
 drivers/regulator/rt6160-regulator.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/rt6160-regulator.c b/drivers/regulator/rt6160-regulator.c
index e2a0eee95c61..548ffdf537d3 100644
--- a/drivers/regulator/rt6160-regulator.c
+++ b/drivers/regulator/rt6160-regulator.c
@@ -31,8 +31,11 @@
 #define RT6160_PGSTAT_MASK	BIT(0)
 
 #define RT6160_VENDOR_ID	0xA0
+#define RT6166_VENDOR_ID	0xB0
 #define RT6160_VOUT_MINUV	2025000
 #define RT6160_VOUT_MAXUV	5200000
+#define RT6166_VOUT_MINUV	1800000
+#define RT6166_VOUD_MAXUV	4950000
 #define RT6160_VOUT_STPUV	25000
 #define RT6160_N_VOUTS		((RT6160_VOUT_MAXUV - RT6160_VOUT_MINUV) / RT6160_VOUT_STPUV + 1)
 
@@ -43,6 +46,7 @@ struct rt6160_priv {
 	struct gpio_desc *enable_gpio;
 	struct regmap *regmap;
 	bool enable_state;
+	uint8_t devid;
 };
 
 static const unsigned int rt6160_ramp_tables[] = {
@@ -260,15 +264,26 @@ static int rt6160_probe(struct i2c_client *i2c)
 	if (ret)
 		return ret;
 
-	if ((devid & RT6160_VID_MASK) != RT6160_VENDOR_ID) {
+	devid = devid & RT6160_VID_MASK;
+
+	switch (devid) {
+	case RT6166_VENDOR_ID:
+	case RT6160_VENDOR_ID:
+		break;
+	default:
 		dev_err(&i2c->dev, "VID not correct [0x%02x]\n", devid);
 		return -ENODEV;
 	}
 
+	priv->devid = devid;
+
 	priv->desc.name = "rt6160-buckboost";
 	priv->desc.type = REGULATOR_VOLTAGE;
 	priv->desc.owner = THIS_MODULE;
-	priv->desc.min_uV = RT6160_VOUT_MINUV;
+	if (priv->devid == RT6166_VENDOR_ID)
+		priv->desc.min_uV = RT6166_VOUT_MINUV;
+	else
+		priv->desc.min_uV = RT6160_VOUT_MINUV;
 	priv->desc.uV_step = RT6160_VOUT_STPUV;
 	if (vsel_active_low)
 		priv->desc.vsel_reg = RT6160_REG_VSELL;
-- 
2.43.0

Re: [PATCH] regulator: rt6160: Add rt6166 vout min_uV setting for compatible

[Mark Brown]

On Wed, 16 Jul 2025 10:08:30 +0800, jeff_chang@richtek.com wrote:
> 1. remove unintentional GPL change
> 2. using switch case for Device ID probe check.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: rt6160: Add rt6166 vout min_uV setting for compatible
      commit: 63be976da994260ea116c431a2e61485dbede1b0

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark