mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH net-next] net: mdio: mdio-bcm-unimac: Refine incorrect clock message
@ 2025-08-11 16:59 Florian Fainelli
  2025-08-13  0:40 ` patchwork-bot+netdevbpf
  0 siblings, 1 reply; 2+ messages in thread
From: Florian Fainelli @ 2025-08-11 16:59 UTC (permalink / raw)
  To: netdev
  Cc: Florian Fainelli, Doug Berger,
	Broadcom internal kernel review list, Andrew Lunn,
	Heiner Kallweit, Russell King, David S. Miller, Eric Dumazet,
	Jakub Kicinski, Paolo Abeni, open list

In light of a81649a4efd3 ("net: mdio: mdio-bcm-unimac: Correct rate
fallback logic"), it became clear that the warning should be specific to
the MDIO controller instance, and there should be further information
provided to indicate what is wrong, whether the requested clock
frequency or the rate calculation. Clarify the message accordingly.

Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/net/mdio/mdio-bcm-unimac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/mdio/mdio-bcm-unimac.c b/drivers/net/mdio/mdio-bcm-unimac.c
index 7baab230008a..37e35f282d9a 100644
--- a/drivers/net/mdio/mdio-bcm-unimac.c
+++ b/drivers/net/mdio/mdio-bcm-unimac.c
@@ -215,7 +215,9 @@ static int unimac_mdio_clk_set(struct unimac_mdio_priv *priv)
 
 	div = (rate / (2 * priv->clk_freq)) - 1;
 	if (div & ~MDIO_CLK_DIV_MASK) {
-		pr_warn("Incorrect MDIO clock frequency, ignoring\n");
+		dev_warn(priv->mii_bus->parent,
+			 "Ignoring MDIO clock frequency request: %d vs. rate: %ld\n",
+			 priv->clk_freq, rate);
 		ret = 0;
 		goto out;
 	}
-- 
2.43.0


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2025-08-13  0:39 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-08-11 16:59 [PATCH net-next] net: mdio: mdio-bcm-unimac: Refine incorrect clock message Florian Fainelli
2025-08-13  0:40 ` patchwork-bot+netdevbpf

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®