Re: [PATCH 3/6] dt-bindings: phy: spacemit: introduce PCIe root complex

["Rob Herring (Arm)" <robh@kernel.org>]

On Wed, 13 Aug 2025 13:46:57 -0500, Alex Elder wrote:
> Add the Device Tree binding for the PCIe root complex found on the
> SpacemiT K1 SoC.  This device is derived from the Synopsys Designware
> PCIe IP.  It supports up to three PCIe ports operating at PCIe gen 2
> link speeds (5 GT/sec).  One of the ports uses a combo PHY, which is
> typically used to support a USB 3 port.
> 
> Signed-off-by: Alex Elder <elder@riscstar.com>
> ---
>  .../bindings/pci/spacemit,k1-pcie-rc.yaml     | 141 ++++++++++++++++++
>  1 file changed, 141 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/spacemit,k1-pcie-rc.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pci/spacemit,k1-pcie-rc.example.dtb: /example-0/pcie@ca000000: failed to match any schema with compatible: ['spacemit,k1-pcie-rc']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250813184701.2444372-4-elder@riscstar.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.