Re: [PATCH 3/6] dt-bindings: phy: spacemit: introduce PCIe root complex

[Alex Elder <elder@riscstar.com>]

On 8/13/25 3:49 PM, Rob Herring (Arm) wrote:
> 
> On Wed, 13 Aug 2025 13:46:57 -0500, Alex Elder wrote:
>> Add the Device Tree binding for the PCIe root complex found on the
>> SpacemiT K1 SoC.  This device is derived from the Synopsys Designware
>> PCIe IP.  It supports up to three PCIe ports operating at PCIe gen 2
>> link speeds (5 GT/sec).  One of the ports uses a combo PHY, which is
>> typically used to support a USB 3 port.
>>
>> Signed-off-by: Alex Elder <elder@riscstar.com>
>> ---
>>   .../bindings/pci/spacemit,k1-pcie-rc.yaml     | 141 ++++++++++++++++++
>>   1 file changed, 141 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/pci/spacemit,k1-pcie-rc.yaml
>>
> 
> My bot found errors running 'make dt_binding_check' on your patch:

Mine didn't for some reason, so I must be doing something wrong.

Simple inspection shows my compatible string contains ".yaml"!

I'll fix in a new version.  Sorry I missed this.

					-Alex

> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/pci/spacemit,k1-pcie-rc.example.dtb: /example-0/pcie@ca000000: failed to match any schema with compatible: ['spacemit,k1-pcie-rc']
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250813184701.2444372-4-elder@riscstar.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>