mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Rob Herring (Arm)" <robh@kernel.org>
To: John Madieu <john.madieu.xa@bp.renesas.com>
Cc: daniel.lezcano@linaro.org, krzk+dt@kernel.org, rafael@kernel.org,
	 geert+renesas@glider.be, linux-pm@vger.kernel.org,
	 biju.das.jz@bp.renesas.com, mturquette@baylibre.com,
	 linux-kernel@vger.kernel.org, rui.zhang@intel.com,
	lukasz.luba@arm.com,  sboyd@kernel.org,
	linux-renesas-soc@vger.kernel.org, conor+dt@kernel.org,
	 will@kernel.org, magnus.damm@gmail.com, john.madieu@gmail.com,
	 linux-arm-kernel@lists.infradead.org, p.zabel@pengutronix.de,
	 devicetree@vger.kernel.org, catalin.marinas@arm.com
Subject: Re: [PATCH v7 0/6] thermal: renesas: Add support for RZ/G3E
Date: Mon, 18 Aug 2025 13:24:42 -0500	[thread overview]
Message-ID: <175554055722.1719725.13076334498195294379.robh@kernel.org> (raw)
In-Reply-To: <20250818162859.9661-1-john.madieu.xa@bp.renesas.com>


On Mon, 18 Aug 2025 18:28:46 +0200, John Madieu wrote:
> This series adds support for the temperature sensor unit (TSU) found on the
> Renesas RZ/G3E SoC.
> 
> The series consists of 5 patches (one of which is not related to the thermal
> framework) that progressively add TSU support as follows:
> - patch 1/6:    adds syscon/regmap support for accessing system controller
>                 registers, enabling access to TSU calibration values
> 
> - patch 2-6/6:  adds dt-bindings, actual driver, DT node, and config symbol.
> 
> Patch 1/6 has been duplicated at [1] in USB series. This series addresses comments
> got from there.
> 
> Changes:
> 
> v1 -> v2
>  * Fix yaml warnings from dt-binding
>  * Update IRQ names to reflect TSU expectations
> 
> v2 -> v3
>  * Remove useless 'renesas,tsu-operating-mode' property
> 
> v3 -> v4
>  * Improve commit messages
> 
> v4 -> v5
>  * Remove useless curly braces on single line-protected scoped guards
> 
> v5 -> v6
>  * Minor typo fix
>  * Constify regmap config in patch 1/5
> 
> v6 -> v7
>  * Update DTS trim priperty name and specifier, updading the documentation
>  accordingly
>  * Refactor main driver: remove spinlock usage, using polling timeout as computed
>  from datasheet. Also use polling for get_temp() while using IRQ for trip-point
>  cross detection, and finally add both runtime and sleep PM support.
>  * Add new patch to update sys #address-cells as trim specifier now requires an
>  offet from sys base
> 
> Regards,
> 
> [1] https://lore.kernel.org/all/20250808061806.2729274-2-claudiu.beznea.uj@bp.renesas.com/
> 
> 
> John Madieu (6):
>   soc: renesas: rz-sysc: Add syscon/regmap support
>   dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
>   thermal: renesas: rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
>   arm64: dts: renesas: r9a09g047: Add #address-cells property in sys
>     node
>   arm64: dts: renesas: r9a09g047: Add TSU node
>   arm64: defconfig: Enable the Renesas RZ/G3E thermal driver
> 
>  .../thermal/renesas,r9a09g047-tsu.yaml        |  87 +++
>  MAINTAINERS                                   |   7 +
>  arch/arm64/boot/dts/renesas/r9a09g047.dtsi    |  49 ++
>  arch/arm64/configs/defconfig                  |   1 +
>  drivers/soc/renesas/Kconfig                   |   1 +
>  drivers/soc/renesas/r9a08g045-sysc.c          |   1 +
>  drivers/soc/renesas/r9a09g047-sys.c           |   1 +
>  drivers/soc/renesas/r9a09g057-sys.c           |   1 +
>  drivers/soc/renesas/rz-sysc.c                 |  28 +-
>  drivers/soc/renesas/rz-sysc.h                 |   2 +
>  drivers/thermal/renesas/Kconfig               |   7 +
>  drivers/thermal/renesas/Makefile              |   1 +
>  drivers/thermal/renesas/rzg3e_thermal.c       | 575 ++++++++++++++++++
>  13 files changed, 760 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
>  create mode 100644 drivers/thermal/renesas/rzg3e_thermal.c
> 
> --
> 2.25.1
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: attempting to guess base-commit...
 Base: tags/v6.17-rc1-12-g0a0e0852f3f3 (best guess, 10/11 blobs matched)

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/renesas/' for 20250818162859.9661-1-john.madieu.xa@bp.renesas.com:

arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dtb: system-controller@10430000 (renesas,r9a09g047-sys): '#address-cells' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/soc/renesas/renesas,r9a09g057-sys.yaml#






  parent reply	other threads:[~2025-08-18 18:24 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-18 16:28 John Madieu
2025-08-18 16:28 ` [PATCH v7 1/6] soc: renesas: rz-sysc: Add syscon/regmap support John Madieu
2025-08-19  5:07   ` claudiu beznea
2025-08-19  7:54   ` Geert Uytterhoeven
2025-08-18 16:28 ` [PATCH v7 2/6] dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit John Madieu
2025-08-21  0:05   ` Rob Herring
2025-08-18 16:28 ` [PATCH v7 3/6] thermal: renesas: rzg3e: Add thermal driver for the Renesas RZ/G3E SoC John Madieu
2025-08-19  7:49   ` Geert Uytterhoeven
2025-08-19  8:23     ` John Madieu
2025-08-18 16:28 ` [PATCH v7 4/6] arm64: dts: renesas: r9a09g047: Add #address-cells property in sys node John Madieu
2025-08-19  7:44   ` Geert Uytterhoeven
2025-08-19  8:25     ` John Madieu
2025-08-18 16:28 ` [PATCH v7 5/6] arm64: dts: renesas: r9a09g047: Add TSU node John Madieu
2025-08-18 16:28 ` [PATCH v7 6/6] arm64: defconfig: Enable the Renesas RZ/G3E thermal driver John Madieu
2025-08-18 18:24 ` Rob Herring (Arm) [this message]
2025-08-19  8:49   ` [PATCH v7 0/6] thermal: renesas: Add support for RZ/G3E John Madieu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=175554055722.1719725.13076334498195294379.robh@kernel.org \
    --to=robh@kernel.org \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=john.madieu.xa@bp.renesas.com \
    --cc=john.madieu@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=lukasz.luba@arm.com \
    --cc=magnus.damm@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=rafael@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=sboyd@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®