* [PATCH] arm64: dts: qcom: ipq5018: add QUP1 UART2 node
@ 2025-09-17 11:49 George Moussalem via B4 Relay
2025-09-17 19:23 ` Bjorn Andersson
0 siblings, 1 reply; 2+ messages in thread
From: George Moussalem via B4 Relay @ 2025-09-17 11:49 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Manikanta Mylavarapu,
George Moussalem
From: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Add node to support the second UART node controller in IPQ5018.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index e88b52006566fd39c0690e6fb53be743eb56d11b..52840eb00a262a05fe2e7cbe5b77c47ff5937222 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -490,6 +490,16 @@ blsp1_uart1: serial@78af000 {
status = "disabled";
};
+ blsp1_uart2: serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b0000 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_spi1: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
---
base-commit: 05af764719214d6568adb55c8749dec295228da8
change-id: 20250917-ipq5018-uart2-999482e00c7c
Best regards,
--
George Moussalem <george.moussalem@outlook.com>
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: qcom: ipq5018: add QUP1 UART2 node
2025-09-17 11:49 [PATCH] arm64: dts: qcom: ipq5018: add QUP1 UART2 node George Moussalem via B4 Relay
@ 2025-09-17 19:23 ` Bjorn Andersson
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Andersson @ 2025-09-17 19:23 UTC (permalink / raw)
To: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
George Moussalem
Cc: linux-arm-msm, devicetree, linux-kernel, Manikanta Mylavarapu
On Wed, 17 Sep 2025 15:49:00 +0400, George Moussalem wrote:
> Add node to support the second UART node controller in IPQ5018.
>
>
Applied, thanks!
[1/1] arm64: dts: qcom: ipq5018: add QUP1 UART2 node
commit: b410d25fb349bc32132749bd2cb17aa17054287d
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-09-17 19:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-09-17 11:49 [PATCH] arm64: dts: qcom: ipq5018: add QUP1 UART2 node George Moussalem via B4 Relay
2025-09-17 19:23 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®