* [PATCH 2/3] arm64: dts: ti: k3-am625: Add OLDI support
2025-09-24 14:39 [PATCH 1/3] arm64: dts: ti: k3-am62: Add support for AM625 OLDI IO Control Wadim Egorov
@ 2025-09-24 14:39 ` Wadim Egorov
2025-09-24 14:39 ` [PATCH 3/3] arm64: dts: ti: am625-phyboard-lyra: Add Lincoln LCD185-101CT panel overlay Wadim Egorov
2025-09-25 1:18 ` [PATCH 1/3] arm64: dts: ti: k3-am62: Add support for AM625 OLDI IO Control Rob Herring (Arm)
2 siblings, 0 replies; 4+ messages in thread
From: Wadim Egorov @ 2025-09-24 14:39 UTC (permalink / raw)
To: nm, vigneshr, kristo, robh, krzk+dt, conor+dt, aradhya.bhatia
Cc: linux-arm-kernel, devicetree, linux-kernel, upstream
From: Aradhya Bhatia <a-bhatia1@ti.com>
The AM625 SoC has 2 OLDI TXes under the DSS. Add their support.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 32 ++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index ffa485545a5f..fbb49d9c70af 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -793,6 +793,38 @@ dss: dss@30200000 {
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ oldi-transmitters {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ oldi0: oldi@0 {
+ reg = <0>;
+ clocks = <&k3_clks 186 0>;
+ clock-names = "serial";
+ ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+ status = "disabled";
+
+ oldi0_ports: ports {
+ };
+ };
+
+ /*
+ * OLDI1 in AM625 SoC can only act as a secondary OLDI, if
+ * required, hence the clock and io-ctrl properties are not
+ * required at the moment.
+ */
+ oldi1: oldi@1 {
+ reg = <1>;
+ clocks = <&k3_clks 186 0>;
+ clock-names = "serial";
+ ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+ status = "disabled";
+
+ oldi1_ports: ports {
+ };
+ };
+ };
+
dss_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
--
2.48.1
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH 3/3] arm64: dts: ti: am625-phyboard-lyra: Add Lincoln LCD185-101CT panel overlay
2025-09-24 14:39 [PATCH 1/3] arm64: dts: ti: k3-am62: Add support for AM625 OLDI IO Control Wadim Egorov
2025-09-24 14:39 ` [PATCH 2/3] arm64: dts: ti: k3-am625: Add OLDI support Wadim Egorov
@ 2025-09-24 14:39 ` Wadim Egorov
2025-09-25 1:18 ` [PATCH 1/3] arm64: dts: ti: k3-am62: Add support for AM625 OLDI IO Control Rob Herring (Arm)
2 siblings, 0 replies; 4+ messages in thread
From: Wadim Egorov @ 2025-09-24 14:39 UTC (permalink / raw)
To: nm, vigneshr, kristo, robh, krzk+dt, conor+dt, aradhya.bhatia
Cc: linux-arm-kernel, devicetree, linux-kernel, upstream
The panel is a Lincoln Technology Solutions LCD185-101CT [0]. It is
a dual-link LVDS panel and supports WUXGA resolution (1920x1200).
Furthermore, it has an I2C based touch controller: Goodix-GT928.
Add an device tree overlay to support the Lincoln LCD185-101CT panel
in combination with the phyBOARD-Lyra-AM62x.
[0] https://lincolntechsolutions.com/wp-content/uploads/2024/09/LCD185-101CTL1ARNTT_DS_R1.3.pdf
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
arch/arm64/boot/dts/ti/Makefile | 3 +
.../k3-am625-phyboard-lyra-oldi-lcd185.dtso | 202 ++++++++++++++++++
2 files changed, 205 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-oldi-lcd185.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index aad9177930e6..aa34a0d77615 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-ov5640.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am652-phyboard-lyra-oldi-lcd185.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb
@@ -165,6 +166,8 @@ k3-am625-phyboard-lyra-gpio-fan-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
k3-am62x-phyboard-lyra-gpio-fan.dtbo
k3-am625-phyboard-lyra-qspi-nor-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
k3-am6xx-phycore-qspi-nor.dtbo
+k3-am625-phyboard-lyra-oldi-lcd185-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
+ k3-am625-phyboard-lyra-oldi-lcd185.dtbo
k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \
k3-am62x-sk-csi2-imx219.dtbo
k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-oldi-lcd185.dtso b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-oldi-lcd185.dtso
new file mode 100644
index 000000000000..8f8e0eddc748
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-oldi-lcd185.dtso
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ display {
+ compatible = "lincolntech,lcd185-101ct";
+ backlight = <&backlight>;
+ power-supply = <&vdd_usb_5v0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dual-lvds-odd-pixels;
+ lcd_in0: endpoint {
+ remote-endpoint = <&oldi_0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dual-lvds-even-pixels;
+ lcd_in1: endpoint {
+ remote-endpoint = <&oldi_1_out>;
+ };
+ };
+ };
+ };
+
+ backlight: backlight {
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_pwm_pins_default>;
+
+ compatible = "pwm-backlight";
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+
+ enable-gpios = <&gpio_exp 5 GPIO_ACTIVE_HIGH>;
+ pwms = <&epwm0 1 50000 0>;
+ };
+
+ vdd_usb_5v0: regulator-vdd-usb5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-usb5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_oldi0_pins_default &main_dss0_pins_default>;
+};
+
+&dss_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VP1: Output to OLDI */
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpi0_out0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&oldi_0_in>;
+ };
+
+ dpi0_out1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&oldi_1_in>;
+ };
+ };
+};
+
+&epwm0 {
+ status = "okay";
+};
+
+&main_i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_screen_pins_default>;
+
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&main_gpio0 18 GPIO_ACTIVE_HIGH>;
+ irq-gpios = <&main_gpio0 19 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&main_pmx0 {
+ bl_pwm_pins_default: bl-pwm-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01b8, PIN_INPUT, 2) /* (C13) SPI0_CS1.EHRPWM0_B */
+ >;
+ };
+
+ touch_screen_pins_default: touch-screen-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x048, PIN_OUTPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 - RST */
+ AM62X_IOPAD(0x04c, PIN_INPUT, 7) /* (P24) GPMC0_AD4.GPIO0_19 - INT */
+ >;
+ };
+
+ main_oldi0_pins_default: main-oldi0-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0260, PIN_OUTPUT, 0) /* (AA5) OLDI0_A0N */
+ AM62X_IOPAD(0x025c, PIN_OUTPUT, 0) /* (Y6) OLDI0_A0P */
+ AM62X_IOPAD(0x0268, PIN_OUTPUT, 0) /* (AD3) OLDI0_A1N */
+ AM62X_IOPAD(0x0264, PIN_OUTPUT, 0) /* (AB4) OLDI0_A1P */
+ AM62X_IOPAD(0x0270, PIN_OUTPUT, 0) /* (Y8) OLDI0_A2N */
+ AM62X_IOPAD(0x026c, PIN_OUTPUT, 0) /* (AA8) OLDI0_A2P */
+ AM62X_IOPAD(0x0278, PIN_OUTPUT, 0) /* (AB6) OLDI0_A3N */
+ AM62X_IOPAD(0x0274, PIN_OUTPUT, 0) /* (AA7) OLDI0_A3P */
+ AM62X_IOPAD(0x0280, PIN_OUTPUT, 0) /* (AC6) OLDI0_A4N */
+ AM62X_IOPAD(0x027c, PIN_OUTPUT, 0) /* (AC5) OLDI0_A4P */
+ AM62X_IOPAD(0x0288, PIN_OUTPUT, 0) /* (AE5) OLDI0_A5N */
+ AM62X_IOPAD(0x0284, PIN_OUTPUT, 0) /* (AD6) OLDI0_A5P */
+ AM62X_IOPAD(0x0290, PIN_OUTPUT, 0) /* (AE6) OLDI0_A6N */
+ AM62X_IOPAD(0x028c, PIN_OUTPUT, 0) /* (AD7) OLDI0_A6P */
+ AM62X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AD8) OLDI0_A7N */
+ AM62X_IOPAD(0x0294, PIN_OUTPUT, 0) /* (AE7) OLDI0_A7P */
+ AM62X_IOPAD(0x02a0, PIN_OUTPUT, 0) /* (AD4) OLDI0_CLK0N */
+ AM62X_IOPAD(0x029c, PIN_OUTPUT, 0) /* (AE3) OLDI0_CLK0P */
+ AM62X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (AE4) OLDI0_CLK1N */
+ AM62X_IOPAD(0x02a4, PIN_OUTPUT, 0) /* (AD5) OLDI0_CLK1P */
+ >;
+ };
+};
+
+&oldi0 {
+ ti,companion-oldi = <&oldi1>;
+ status = "okay";
+};
+
+&oldi1 {
+ ti,secondary-oldi;
+ status = "okay";
+};
+
+&oldi0_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ oldi_0_in: endpoint {
+ remote-endpoint = <&dpi0_out0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ oldi_0_out: endpoint {
+ remote-endpoint = <&lcd_in0>;
+ };
+ };
+};
+
+&oldi1_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ oldi_1_in: endpoint {
+ remote-endpoint = <&dpi0_out1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ oldi_1_out: endpoint {
+ remote-endpoint = <&lcd_in1>;
+ };
+ };
+};
--
2.48.1
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH 1/3] arm64: dts: ti: k3-am62: Add support for AM625 OLDI IO Control
2025-09-24 14:39 [PATCH 1/3] arm64: dts: ti: k3-am62: Add support for AM625 OLDI IO Control Wadim Egorov
2025-09-24 14:39 ` [PATCH 2/3] arm64: dts: ti: k3-am625: Add OLDI support Wadim Egorov
2025-09-24 14:39 ` [PATCH 3/3] arm64: dts: ti: am625-phyboard-lyra: Add Lincoln LCD185-101CT panel overlay Wadim Egorov
@ 2025-09-25 1:18 ` Rob Herring (Arm)
2 siblings, 0 replies; 4+ messages in thread
From: Rob Herring (Arm) @ 2025-09-25 1:18 UTC (permalink / raw)
To: Wadim Egorov
Cc: linux-kernel, kristo, krzk+dt, devicetree, upstream, conor+dt,
aradhya.bhatia, vigneshr, nm, linux-arm-kernel
On Wed, 24 Sep 2025 16:39:14 +0200, Wadim Egorov wrote:
> From: Aradhya Bhatia <a-bhatia1@ti.com>
>
> Add TI DSS OLDI-IO control registers for AM625 DSS. This is a region of
> 12 32bit registers found in the TI AM625 CTRL_MMR0 register space[0].
> They are used to control the characteristics of the OLDI DATA/CLK IO as
> needed by the DSS display controller node.
>
> [0]: https://www.ti.com/lit/pdf/spruiv7
>
> Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
> Signed-off-by: Swamil Jain <s-jain1@ti.com>
> Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
> ---
> arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: tags/v6.17-rc1-58-g7c1d13a14e61 (best guess, 1/2 blobs matched)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/ti/' for 20250924143916.2023919-1-w.egorov@phytec.de:
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@0:ports: 'oneOf' conditional failed, one must be fixed:
'port' is a required property
'#address-cells' is a required property
'#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@0:ports: 'port@0' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@0:ports: 'port@1' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@1:ports: 'oneOf' conditional failed, one must be fixed:
'port' is a required property
'#address-cells' is a required property
'#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@1:ports: 'port@0' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@1:ports: 'port@1' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am62-lp-sk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@0:ports: 'oneOf' conditional failed, one must be fixed:
'port' is a required property
'#address-cells' is a required property
'#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am62-lp-sk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@0:ports: 'port@0' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am62-lp-sk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@0:ports: 'port@1' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am62-lp-sk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@1:ports: 'oneOf' conditional failed, one must be fixed:
'port' is a required property
'#address-cells' is a required property
'#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am62-lp-sk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@1:ports: 'port@0' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am62-lp-sk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@1:ports: 'port@1' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-sk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@0:ports: 'oneOf' conditional failed, one must be fixed:
'port' is a required property
'#address-cells' is a required property
'#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-sk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@0:ports: 'port@0' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-sk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@0:ports: 'port@1' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-sk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@1:ports: 'oneOf' conditional failed, one must be fixed:
'port' is a required property
'#address-cells' is a required property
'#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-sk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@1:ports: 'port@0' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-sk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@1:ports: 'port@1' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@0:ports: 'oneOf' conditional failed, one must be fixed:
'port' is a required property
'#address-cells' is a required property
'#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@0:ports: 'port@0' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@0:ports: 'port@1' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@1:ports: 'oneOf' conditional failed, one must be fixed:
'port' is a required property
'#address-cells' is a required property
'#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@1:ports: 'port@0' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dtb: dss@30200000 (ti,am625-dss): oldi-transmitters:oldi@1:ports: 'port@1' is a required property
from schema $id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
^ permalink raw reply [flat|nested] 4+ messages in thread