mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v5 0/2] arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A
@ 2025-09-29  6:46 Xilin Wu
  2025-09-29  6:46 ` [PATCH v5 1/2] dt-bindings: arm: qcom: Add " Xilin Wu
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Xilin Wu @ 2025-09-29  6:46 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley
  Cc: linux-arm-msm, devicetree, linux-kernel, Xilin Wu,
	Krzysztof Kozlowski, Konrad Dybcio, Dmitry Baryshkov

Radxa Dragon Q6A (https://docs.radxa.com/en/dragon/q6a) is a single board
computer, based on the Qualcomm QCS6490 platform.

The board ships with a modified version of the Qualcomm Linux boot
firmware, which is stored on the onboard SPI NOR flash. This allows
booting standard EFI-based bootloaders from SD/eMMC/USB/UFS/NVMe. It
supports replaceable UFS 3.1/eMMC modules for easy user upgrades.

The board schematic is available at [1].

Features enabled and working:

- Configurable I2C/SPI/UART from 40-Pin GPIO
- Three USB-A 2.0 ports
- RTL8111K Ethernet connected to PCIe0
- eMMC module
- SD card
- M.2 M-Key 2230 PCIe 3.0 x2
- Headphone jack
- Onboard thermal sensors
- QSPI controller for updating boot firmware
- ADSP remoteproc (Type-C and charging features disabled in firmware)
- CDSP remoteproc (for AI applications using QNN)
- Venus video encode and decode accelerator

Features available with additional DT overlays:
- CSI cameras
- DSI display

Features that will be submitted separately once the required bindings are
merged:

- USB-A 3.0 port
- UFS 3.1 module
- HDMI 2.0 port including audio

ALSA UCM and Audioreach topology patches are available at [2] and [3].

[1]: https://docs.radxa.com/en/dragon/q6a/download
[2]: https://github.com/alsa-project/alsa-ucm-conf/pull/601
[3]: https://github.com/linux-msm/audioreach-topology/pull/24

Signed-off-by: Xilin Wu <sophon@radxa.com>
---
Changes in v5:
- Change LED default function to panic-indicator
- Fix line break in sound node
- Fix status-not-last in usb_2_hsphy
- Remove unused regulators to avoid potential issues
- Link to v4: https://lore.kernel.org/r/20250924-radxa-dragon-q6a-v4-0-10d584f2c806@radxa.com

Changes in v4:
- Change CDSP firmware to use the existing one from linux-firmware
- Describe onboard USB 2.0 hub and ports
- Add configurable I2C/SPI/UART QUP controllers
- Link to v3: https://lore.kernel.org/r/20250915-radxa-dragon-q6a-v3-0-a6c32d988ed7@radxa.com

Changes in v3:
- Dropped patches for USB/HDMI, UFS and GPIO.
- Removed Reviewed-by tag from the board DTS patch as it was significantly
  modified.
- Link to v2: https://lore.kernel.org/r/20250914-radxa-dragon-q6a-v2-0-045f7e92b3bb@radxa.com

Changes in v2:
- Move codec before cpu in sound node to get sorted.
- Drop patch dependencies in cover letter
- Separate the changes that have unmet dependencies, and mark them as DNM
- Link to v1: https://lore.kernel.org/r/20250912-radxa-dragon-q6a-v1-0-8ccdbf9cd19b@radxa.com

---
Xilin Wu (2):
      dt-bindings: arm: qcom: Add Radxa Dragon Q6A
      arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A

 Documentation/devicetree/bindings/arm/qcom.yaml    |    1 +
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 .../boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts     | 1095 ++++++++++++++++++++
 3 files changed, 1097 insertions(+)
---
base-commit: 590b221ed4256fd6c34d3dea77aa5bd6e741bbc1
change-id: 20250912-radxa-dragon-q6a-eedcdeaf3e66

Best regards,
-- 
Xilin Wu <sophon@radxa.com>


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v5 1/2] dt-bindings: arm: qcom: Add Radxa Dragon Q6A
  2025-09-29  6:46 [PATCH v5 0/2] arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A Xilin Wu
@ 2025-09-29  6:46 ` Xilin Wu
  2025-09-29  6:46 ` [PATCH v5 2/2] arm64: dts: qcom: qcs6490: Introduce " Xilin Wu
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: Xilin Wu @ 2025-09-29  6:46 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley
  Cc: linux-arm-msm, devicetree, linux-kernel, Xilin Wu, Krzysztof Kozlowski

Radxa Dragon Q6A is a single board computer, based on the Qualcomm
QCS6490 platform.

Document the top-level compatible for this board.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xilin Wu <sophon@radxa.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 0a3222d6f3686f1647b9e2ea192c175b0b96d48a..a7469a51adf0d6ebc1bf25acce8f125a844dcdbf 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -339,6 +339,7 @@ properties:
               - fairphone,fp5
               - qcom,qcm6490-idp
               - qcom,qcs6490-rb3gen2
+              - radxa,dragon-q6a
               - shift,otter
           - const: qcom,qcm6490
 

-- 
2.51.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v5 2/2] arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A
  2025-09-29  6:46 [PATCH v5 0/2] arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A Xilin Wu
  2025-09-29  6:46 ` [PATCH v5 1/2] dt-bindings: arm: qcom: Add " Xilin Wu
@ 2025-09-29  6:46 ` Xilin Wu
  2025-09-29 15:29 ` [PATCH v5 0/2] " Rob Herring (Arm)
  2025-10-27 22:37 ` Bjorn Andersson
  3 siblings, 0 replies; 5+ messages in thread
From: Xilin Wu @ 2025-09-29  6:46 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley
  Cc: linux-arm-msm, devicetree, linux-kernel, Xilin Wu, Konrad Dybcio,
	Dmitry Baryshkov

Radxa Dragon Q6A is a single board computer, based on the Qualcomm
QCS6490 platform.

Features enabled and working:

- Configurable I2C/SPI/UART from 40-Pin GPIO
- Three USB-A 2.0 ports
- RTL8111K Ethernet connected to PCIe0
- eMMC module
- SD card
- M.2 M-Key 2230 PCIe 3.0 x2
- Headphone jack
- Onboard thermal sensors
- QSPI controller for updating boot firmware
- ADSP remoteproc (Type-C and charging features disabled in firmware)
- CDSP remoteproc (for AI applications using QNN)
- Venus video encode and decode accelerator

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Xilin Wu <sophon@radxa.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 .../boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts     | 1095 ++++++++++++++++++++
 2 files changed, 1096 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5b52f9e4e5f31ac5a398d0762337a0a31af1f4dd..3a246adb0c435d7b08dda404ed2bcb2a9c8c48b0 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -120,6 +120,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-shift-otter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs615-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-radxa-dragon-q6a.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
 
 qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts b/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts
new file mode 100644
index 0000000000000000000000000000000000000000..a63f79b0844c8472c16e3b5b979bcc8a892ee245
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts
@@ -0,0 +1,1095 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Radxa Computer (Shenzhen) Co., Ltd.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi" /* PM7350C */
+#include "pmk8350.dtsi" /* PMK7325 */
+#include "qcs6490-audioreach.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &remoteproc_wpss;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wifi;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wlan_fw_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Radxa Dragon Q6A";
+	compatible = "radxa,dragon-q6a", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &uart5;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
+
+		vdd-rxtx-supply = <&vreg_l18b_1p8>;
+		vdd-io-supply = <&vreg_l18b_1p8>;
+		vdd-buck-supply = <&vreg_l17b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob_3p296>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		qcom,hphl-jack-type-normally-closed;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb2_1_con: connector-0 {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vcc_5v_peri>;
+
+		port {
+			usb2_1_connector: endpoint {
+				remote-endpoint = <&usb_hub_2_1>;
+			};
+		};
+	};
+
+	usb2_2_con: connector-1 {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vcc_5v_peri>;
+
+		port {
+			usb2_2_connector: endpoint {
+				remote-endpoint = <&usb_hub_2_2>;
+			};
+		};
+	};
+
+	usb2_3_con: connector-2 {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vcc_5v_peri>;
+
+		port {
+			usb2_3_connector: endpoint {
+				remote-endpoint = <&usb_hub_2_3>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&user_led>;
+		pinctrl-names = "default";
+
+		user-led {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@84800000 {
+			reg = <0x0 0x84800000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@87000000 {
+			reg = <0x0 0x87000000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@88e00000 {
+			reg = <0x0 0x88e00000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@89500000 {
+			reg = <0x0 0x89500000 0x0 0x500000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@89a00000 {
+			reg = <0x0 0x89a00000 0x0 0x2000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		msm-skin-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+		};
+
+		ufs-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+		};
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_5v_peri>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v_peri>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_5v_peri: regulator-vcc-5v-peri {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v_peri";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vph_pwr>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p536>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p2>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p84>;
+
+		vreg_s1b_1p84: smps1 {
+			regulator-name = "vreg_s1b_1p84";
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7b_0p536: smps7 {
+			regulator-name = "vreg_s7b_0p536";
+			regulator-min-microvolt = <536000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p2: smps8 {
+			regulator-name = "vreg_s8b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1496000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-name = "vreg_l1b_0p912";
+			regulator-min-microvolt = <832000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+							RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-name = "vreg_l2b_3p072";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+							RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+							RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p96: ldo7 {
+			regulator-name = "vreg_l7b_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+							RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p8: ldo17 {
+			regulator-name = "vreg_l17b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-name = "vreg_l18b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-name = "vreg_l19b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p84>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p536>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1976000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-name = "vreg_l10c_0p88";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-name = "vreg_bob_3p296";
+			regulator-min-microvolt = <3032000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcs6490/a660_zap.mbn";
+};
+
+/* Pin 13, 15 in GPIO header */
+&i2c0 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+/* Pin 27, 28 in GPIO header */
+&i2c2 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+/* Pin 3, 5 in GPIO header */
+&i2c6 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+&i2c10 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t11";
+		reg = <0x68>;
+	};
+};
+
+/* External touchscreen */
+&i2c13 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+&lpass_audiocc {
+	compatible = "qcom,qcm6490-lpassaudiocc";
+	/delete-property/ power-domains;
+};
+
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_clkreq_n>, <&pcie0_reset_n>, <&pcie0_wake_n>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie1_clkreq_n>, <&pcie1_reset_n>, <&pcie1_wake_n>;
+	pinctrl-names = "default";
+
+	/* Support for QPS615 PCIe switch */
+	iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+		    <0x100 &apps_smmu 0x1c81 0x1>,
+		    <0x208 &apps_smmu 0x1c84 0x1>,
+		    <0x210 &apps_smmu 0x1c85 0x1>,
+		    <0x218 &apps_smmu 0x1c86 0x1>,
+		    <0x300 &apps_smmu 0x1c87 0x1>,
+		    <0x400 &apps_smmu 0x1c88 0x1>,
+		    <0x500 &apps_smmu 0x1c89 0x1>,
+		    <0x501 &apps_smmu 0x1c90 0x1>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pm7325_gpios {
+	pm7325_adc_default: adc-default-state {
+		pins = "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+};
+
+&pm7325_temp_alarm {
+	io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
+	io-channel-names = "thermal";
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	msm-skin-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	ufs-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_vadc {
+	pinctrl-0 = <&pm7325_adc_default>;
+	pinctrl-names = "default";
+
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk7325_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		label = "xo_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@103 {
+		reg = <PM7325_ADC7_DIE_TEMP>;
+		label = "pm7325_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "quiet_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "msm_skin_therm";
+	};
+
+	channel@14a {
+		/* According to datasheet, 0x4a = AMUX1_GPIO = GPIO_02 */
+		reg = <PM7325_ADC7_GPIO1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "ufs_therm";
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&qspi {
+	/* It's not possible to use QSPI with iommu */
+	/* due to an error in qcom_smmu_write_s2cr */
+	/delete-property/ iommus;
+
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>,
+				<&qspi_data1>, <&qspi_data23>;
+	pinctrl-1 = <&qspi_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	spi_flash: flash@0 {
+		compatible = "winbond,w25q256", "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&qupv3_id_0 {
+	firmware-name = "qcom/qcm6490/qupv3fw.elf";
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	firmware-name = "qcom/qcm6490/qupv3fw.elf";
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs6490/radxa/dragon-q6a/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs6490/cdsp.mbn";
+	status = "okay";
+};
+
+&sdhc_1 {
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	vmmc-supply = <&vreg_l7b_2p96>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
+
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_2p96>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,qcs6490-rb3gen2-sndcard";
+	model = "QCS6490-Radxa-Dragon-Q6A";
+
+	audio-routing = "IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC2", "MIC BIAS2",
+			"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+};
+
+/* Pin 11, 29, 31, 32 in GPIO header */
+&spi7 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+/* Pin 19, 21, 23, 24, 26 in GPIO header */
+&spi12 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+/* Pin 22, 33, 36, 37 in GPIO header */
+&spi14 {
+	qcom,enable-gsi-dma;
+	status = "okay";
+};
+
+&swr0 {
+	status = "okay";
+
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&tlmm {
+	gpio-line-names =
+		/* GPIO_0 ~ GPIO_3 */
+		"PIN_13", "PIN_15", "", "",
+		/* GPIO_4 ~ GPIO_7 */
+		"", "", "", "",
+		/* GPIO_8 ~ GPIO_11 */
+		"PIN_27", "PIN_28", "", "",
+		/* GPIO_12 ~ GPIO_15 */
+		"", "", "", "",
+		/* GPIO_16 ~ GPIO_19 */
+		"", "", "", "",
+		/* GPIO_20 ~ GPIO_23 */
+		"", "", "PIN_8", "PIN_10",
+		/* GPIO_24 ~ GPIO_27 */
+		"PIN_3", "PIN_5", "PIN_16", "PIN_27",
+		/* GPIO_28 ~ GPIO_31 */
+		"PIN_31", "PIN_11", "PIN_32", "PIN_29",
+		/* GPIO_32 ~ GPIO_35 */
+		"", "", "", "",
+		/* GPIO_36 ~ GPIO_39 */
+		"", "", "", "",
+		/* GPIO_40 ~ GPIO_43 */
+		"", "", "", "",
+		/* GPIO_44 ~ GPIO_47 */
+		"", "", "", "",
+		/* GPIO_48 ~ GPIO_51 */
+		"PIN_21", "PIN_19", "PIN_23", "PIN_24",
+		/* GPIO_52 ~ GPIO_55 */
+		"", "", "", "PIN_26",
+		/* GPIO_56 ~ GPIO_59 */
+		"PIN_33", "PIN_22", "PIN_37", "PIN_36",
+		/* GPIO_60 ~ GPIO_63 */
+		"", "", "", "",
+		/* GPIO_64 ~ GPIO_67 */
+		"", "", "", "",
+		/* GPIO_68 ~ GPIO_71 */
+		"", "", "", "",
+		/* GPIO_72 ~ GPIO_75 */
+		"", "", "", "",
+		/* GPIO_76 ~ GPIO_79 */
+		"", "", "", "",
+		/* GPIO_80 ~ GPIO_83 */
+		"", "", "", "",
+		/* GPIO_84 ~ GPIO_87 */
+		"", "", "", "",
+		/* GPIO_88 ~ GPIO_91 */
+		"", "", "", "",
+		/* GPIO_92 ~ GPIO_95 */
+		"", "", "", "",
+		/* GPIO_96 ~ GPIO_99 */
+		"PIN_7", "PIN_12", "PIN_38", "PIN_40",
+		/* GPIO_100 ~ GPIO_103 */
+		"PIN_35", "", "", "",
+		/* GPIO_104 ~ GPIO_107 */
+		"", "", "", "",
+		/* GPIO_108 ~ GPIO_111 */
+		"", "", "", "",
+		/* GPIO_112 ~ GPIO_115 */
+		"", "", "", "",
+		/* GPIO_116 ~ GPIO_119 */
+		"", "", "", "",
+		/* GPIO_120 ~ GPIO_123 */
+		"", "", "", "",
+		/* GPIO_124 ~ GPIO_127 */
+		"", "", "", "",
+		/* GPIO_128 ~ GPIO_131 */
+		"", "", "", "",
+		/* GPIO_132 ~ GPIO_135 */
+		"", "", "", "",
+		/* GPIO_136 ~ GPIO_139 */
+		"", "", "", "",
+		/* GPIO_140 ~ GPIO_143 */
+		"", "", "", "",
+		/* GPIO_144 ~ GPIO_147 */
+		"", "", "", "",
+		/* GPIO_148 ~ GPIO_151 */
+		"", "", "", "",
+		/* GPIO_152 ~ GPIO_155 */
+		"", "", "", "",
+		/* GPIO_156 ~ GPIO_159 */
+		"", "", "", "",
+		/* GPIO_160 ~ GPIO_163 */
+		"", "", "", "",
+		/* GPIO_164 ~ GPIO_167 */
+		"", "", "", "",
+		/* GPIO_168 ~ GPIO_171 */
+		"", "", "", "",
+		/* GPIO_172 ~ GPIO_174 */
+		"", "", "";
+
+	pcie0_reset_n: pcie0-reset-n-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie0_wake_n: pcie0-wake-n-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	pcie1_reset_n: pcie1-reset-n-state {
+		pins = "gpio2";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie1_wake_n: pcie1-wake-n-state {
+		pins = "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qspi_sleep: qspi-sleep-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15", "gpio16", "gpio17";
+		function = "gpio";
+		output-disable;
+	};
+
+	sd_cd: sd-cd-state {
+		pins = "gpio91";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	user_led: user-led-state {
+		pins = "gpio42";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usb_2 {
+	dr_mode = "host";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	/* Onboard USB 2.0 hub */
+	usb_hub_2_x: hub@1 {
+		compatible = "usb1a40,0101";
+		reg = <1>;
+		vdd-supply = <&vcc_5v_peri>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				usb_hub_2_1: endpoint {
+					remote-endpoint = <&usb2_1_connector>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				usb_hub_2_2: endpoint {
+					remote-endpoint = <&usb2_2_connector>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				usb_hub_2_3: endpoint {
+					remote-endpoint = <&usb2_3_connector>;
+				};
+			};
+		};
+
+		/* FCU760K Wi-Fi & Bluetooth module */
+		wifi@4 {
+			compatible = "usba69c,8d80";
+			reg = <4>;
+		};
+	};
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&venus {
+	status = "okay";
+};
+
+/* PINCTRL - additions to nodes defined in sc7280.dtsi */
+&pcie0_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
+
+&pcie1_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
+
+&qspi_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&qspi_cs0 {
+	bias-disable;
+	drive-strength = <8>;
+};
+
+&qspi_data0 {
+	bias-disable;
+	drive-strength = <8>;
+};
+
+&qspi_data1 {
+	bias-disable;
+	drive-strength = <8>;
+};
+
+&qspi_data23 {
+	bias-disable;
+	drive-strength = <8>;
+};
+
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_rclk {
+	bias-pull-down;
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};

-- 
2.51.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v5 0/2] arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A
  2025-09-29  6:46 [PATCH v5 0/2] arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A Xilin Wu
  2025-09-29  6:46 ` [PATCH v5 1/2] dt-bindings: arm: qcom: Add " Xilin Wu
  2025-09-29  6:46 ` [PATCH v5 2/2] arm64: dts: qcom: qcs6490: Introduce " Xilin Wu
@ 2025-09-29 15:29 ` Rob Herring (Arm)
  2025-10-27 22:37 ` Bjorn Andersson
  3 siblings, 0 replies; 5+ messages in thread
From: Rob Herring (Arm) @ 2025-09-29 15:29 UTC (permalink / raw)
  To: Xilin Wu
  Cc: Konrad Dybcio, Dmitry Baryshkov, Konrad Dybcio,
	Krzysztof Kozlowski, linux-kernel, Conor Dooley, linux-arm-msm,
	devicetree, Bjorn Andersson, Krzysztof Kozlowski


On Mon, 29 Sep 2025 14:46:40 +0800, Xilin Wu wrote:
> Radxa Dragon Q6A (https://docs.radxa.com/en/dragon/q6a) is a single board
> computer, based on the Qualcomm QCS6490 platform.
> 
> The board ships with a modified version of the Qualcomm Linux boot
> firmware, which is stored on the onboard SPI NOR flash. This allows
> booting standard EFI-based bootloaders from SD/eMMC/USB/UFS/NVMe. It
> supports replaceable UFS 3.1/eMMC modules for easy user upgrades.
> 
> The board schematic is available at [1].
> 
> Features enabled and working:
> 
> - Configurable I2C/SPI/UART from 40-Pin GPIO
> - Three USB-A 2.0 ports
> - RTL8111K Ethernet connected to PCIe0
> - eMMC module
> - SD card
> - M.2 M-Key 2230 PCIe 3.0 x2
> - Headphone jack
> - Onboard thermal sensors
> - QSPI controller for updating boot firmware
> - ADSP remoteproc (Type-C and charging features disabled in firmware)
> - CDSP remoteproc (for AI applications using QNN)
> - Venus video encode and decode accelerator
> 
> Features available with additional DT overlays:
> - CSI cameras
> - DSI display
> 
> Features that will be submitted separately once the required bindings are
> merged:
> 
> - USB-A 3.0 port
> - UFS 3.1 module
> - HDMI 2.0 port including audio
> 
> ALSA UCM and Audioreach topology patches are available at [2] and [3].
> 
> [1]: https://docs.radxa.com/en/dragon/q6a/download
> [2]: https://github.com/alsa-project/alsa-ucm-conf/pull/601
> [3]: https://github.com/linux-msm/audioreach-topology/pull/24
> 
> Signed-off-by: Xilin Wu <sophon@radxa.com>
> ---
> Changes in v5:
> - Change LED default function to panic-indicator
> - Fix line break in sound node
> - Fix status-not-last in usb_2_hsphy
> - Remove unused regulators to avoid potential issues
> - Link to v4: https://lore.kernel.org/r/20250924-radxa-dragon-q6a-v4-0-10d584f2c806@radxa.com
> 
> Changes in v4:
> - Change CDSP firmware to use the existing one from linux-firmware
> - Describe onboard USB 2.0 hub and ports
> - Add configurable I2C/SPI/UART QUP controllers
> - Link to v3: https://lore.kernel.org/r/20250915-radxa-dragon-q6a-v3-0-a6c32d988ed7@radxa.com
> 
> Changes in v3:
> - Dropped patches for USB/HDMI, UFS and GPIO.
> - Removed Reviewed-by tag from the board DTS patch as it was significantly
>   modified.
> - Link to v2: https://lore.kernel.org/r/20250914-radxa-dragon-q6a-v2-0-045f7e92b3bb@radxa.com
> 
> Changes in v2:
> - Move codec before cpu in sound node to get sorted.
> - Drop patch dependencies in cover letter
> - Separate the changes that have unmet dependencies, and mark them as DNM
> - Link to v1: https://lore.kernel.org/r/20250912-radxa-dragon-q6a-v1-0-8ccdbf9cd19b@radxa.com
> 
> ---
> Xilin Wu (2):
>       dt-bindings: arm: qcom: Add Radxa Dragon Q6A
>       arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A
> 
>  Documentation/devicetree/bindings/arm/qcom.yaml    |    1 +
>  arch/arm64/boot/dts/qcom/Makefile                  |    1 +
>  .../boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts     | 1095 ++++++++++++++++++++
>  3 files changed, 1097 insertions(+)
> ---
> base-commit: 590b221ed4256fd6c34d3dea77aa5bd6e741bbc1
> change-id: 20250912-radxa-dragon-q6a-eedcdeaf3e66
> 
> Best regards,
> --
> Xilin Wu <sophon@radxa.com>
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: using specified base-commit 590b221ed4256fd6c34d3dea77aa5bd6e741bbc1

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250929-radxa-dragon-q6a-v5-0-aa96ffc352f8@radxa.com:

arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: geniqup@9c0000 (qcom,geni-se-qup): i2c@980000: Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: geniqup@9c0000 (qcom,geni-se-qup): i2c@988000: Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: geniqup@9c0000 (qcom,geni-se-qup): i2c@998000: Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: geniqup@9c0000 (qcom,geni-se-qup): spi@99c000: Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: i2c@980000 (qcom,geni-i2c): Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: i2c@988000 (qcom,geni-i2c): Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: i2c@998000 (qcom,geni-i2c): Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: spi@99c000 (qcom,geni-spi): Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: geniqup@ac0000 (qcom,geni-se-qup): i2c@a88000: Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: geniqup@ac0000 (qcom,geni-se-qup): i2c@a94000: Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: geniqup@ac0000 (qcom,geni-se-qup): spi@a90000: Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: geniqup@ac0000 (qcom,geni-se-qup): spi@a98000: Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: i2c@a88000 (qcom,geni-i2c): Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: spi@a90000 (qcom,geni-spi): Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: i2c@a94000 (qcom,geni-i2c): Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: spi@a98000 (qcom,geni-spi): Unevaluated properties are not allowed ('qcom,enable-gsi-dma' was unexpected)
	from schema $id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml#
arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dtb: edp@aea0000 (qcom,sc7280-edp): reg: [[0, 183107584, 0, 512], [0, 183108096, 0, 512], [0, 183108608, 0, 3072], [0, 183111680, 0, 1024]] is too short
	from schema $id: http://devicetree.org/schemas/display/msm/dp-controller.yaml#






^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v5 0/2] arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A
  2025-09-29  6:46 [PATCH v5 0/2] arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A Xilin Wu
                   ` (2 preceding siblings ...)
  2025-09-29 15:29 ` [PATCH v5 0/2] " Rob Herring (Arm)
@ 2025-10-27 22:37 ` Bjorn Andersson
  3 siblings, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2025-10-27 22:37 UTC (permalink / raw)
  To: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Xilin Wu
  Cc: linux-arm-msm, devicetree, linux-kernel, Krzysztof Kozlowski,
	Konrad Dybcio, Dmitry Baryshkov


On Mon, 29 Sep 2025 14:46:40 +0800, Xilin Wu wrote:
> Radxa Dragon Q6A (https://docs.radxa.com/en/dragon/q6a) is a single board
> computer, based on the Qualcomm QCS6490 platform.
> 
> The board ships with a modified version of the Qualcomm Linux boot
> firmware, which is stored on the onboard SPI NOR flash. This allows
> booting standard EFI-based bootloaders from SD/eMMC/USB/UFS/NVMe. It
> supports replaceable UFS 3.1/eMMC modules for easy user upgrades.
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: arm: qcom: Add Radxa Dragon Q6A
      commit: 8388ebac980201382941600d4d9a2dc0bc1c9db4
[2/2] arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A
      commit: ef254b12ec60c2672c18dbf423bd16476a7fb62e

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2025-10-27 22:35 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-09-29  6:46 [PATCH v5 0/2] arm64: dts: qcom: qcs6490: Introduce Radxa Dragon Q6A Xilin Wu
2025-09-29  6:46 ` [PATCH v5 1/2] dt-bindings: arm: qcom: Add " Xilin Wu
2025-09-29  6:46 ` [PATCH v5 2/2] arm64: dts: qcom: qcs6490: Introduce " Xilin Wu
2025-09-29 15:29 ` [PATCH v5 0/2] " Rob Herring (Arm)
2025-10-27 22:37 ` Bjorn Andersson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®