* [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT
@ 2025-11-05 5:50 Max Chou
2025-11-05 5:50 ` [PATCH 1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F " Max Chou
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Max Chou @ 2025-11-05 5:50 UTC (permalink / raw)
To: Marcel Holtmann, Luiz Augusto von Dentz, linux-bluetooth, linux-kernel
Cc: Hilda Wu, alex_lu, niall_ni, KidmanLee, Max Chou
This patch series adds new VID/PID support for RTL8852BE-VT.
Max Chou (3):
Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
drivers/bluetooth/btusb.c | 6 ++++++
1 file changed, 6 insertions(+)
--
2.43.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
2025-11-05 5:50 [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT Max Chou
@ 2025-11-05 5:50 ` Max Chou
2025-11-05 5:50 ` [PATCH 2/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 " Max Chou
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Max Chou @ 2025-11-05 5:50 UTC (permalink / raw)
To: Marcel Holtmann, Luiz Augusto von Dentz, linux-bluetooth, linux-kernel
Cc: Hilda Wu, alex_lu, niall_ni, KidmanLee, Max Chou
Add the support ID(0x0489, 0xE12F) to usb_device_id table for
Realtek RTL8852BE-VT.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e12f Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Max Chou <max.chou@realtek.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index dcbff764122f..0308fb92c122 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -585,6 +585,8 @@ static const struct usb_device_id quirks_table[] = {
/* Realtek 8852BT/8852BE-VT Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0489, 0xe12f), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Realtek 8922AE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
--
2.43.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
2025-11-05 5:50 [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT Max Chou
2025-11-05 5:50 ` [PATCH 1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F " Max Chou
@ 2025-11-05 5:50 ` Max Chou
2025-11-05 5:50 ` [PATCH 3/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 " Max Chou
2025-11-07 19:10 ` [PATCH 0/3] Bluetooth: btusb: Add new VID/PID " patchwork-bot+bluetooth
3 siblings, 0 replies; 5+ messages in thread
From: Max Chou @ 2025-11-05 5:50 UTC (permalink / raw)
To: Marcel Holtmann, Luiz Augusto von Dentz, linux-bluetooth, linux-kernel
Cc: Hilda Wu, alex_lu, niall_ni, KidmanLee, Max Chou
Add the support ID(0x13d3, 0x3618) to usb_device_id table for
Realtek RTL8852BE-VT.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3618 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Max Chou <max.chou@realtek.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 0308fb92c122..6b4262755bda 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -587,6 +587,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0489, 0xe12f), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3618), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Realtek 8922AE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
--
2.43.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 3/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
2025-11-05 5:50 [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT Max Chou
2025-11-05 5:50 ` [PATCH 1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F " Max Chou
2025-11-05 5:50 ` [PATCH 2/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 " Max Chou
@ 2025-11-05 5:50 ` Max Chou
2025-11-07 19:10 ` [PATCH 0/3] Bluetooth: btusb: Add new VID/PID " patchwork-bot+bluetooth
3 siblings, 0 replies; 5+ messages in thread
From: Max Chou @ 2025-11-05 5:50 UTC (permalink / raw)
To: Marcel Holtmann, Luiz Augusto von Dentz, linux-bluetooth, linux-kernel
Cc: Hilda Wu, alex_lu, niall_ni, KidmanLee, Max Chou
Add the support ID(0x13d3, 0x3619) to usb_device_id table for
Realtek RTL8852BE-VT.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3619 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Max Chou <max.chou@realtek.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 6b4262755bda..2172783dbeee 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -589,6 +589,8 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x13d3, 0x3618), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3619), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Realtek 8922AE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
--
2.43.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT
2025-11-05 5:50 [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT Max Chou
` (2 preceding siblings ...)
2025-11-05 5:50 ` [PATCH 3/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 " Max Chou
@ 2025-11-07 19:10 ` patchwork-bot+bluetooth
3 siblings, 0 replies; 5+ messages in thread
From: patchwork-bot+bluetooth @ 2025-11-07 19:10 UTC (permalink / raw)
To: Max Chou
Cc: marcel, luiz.dentz, linux-bluetooth, linux-kernel, hildawu,
alex_lu, niall_ni, kidman
Hello:
This series was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:
On Wed, 5 Nov 2025 13:50:38 +0800 you wrote:
> This patch series adds new VID/PID support for RTL8852BE-VT.
>
> Max Chou (3):
> Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
> Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
> Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
>
> [...]
Here is the summary with links:
- [1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
https://git.kernel.org/bluetooth/bluetooth-next/c/234c42bfac07
- [2/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
https://git.kernel.org/bluetooth/bluetooth-next/c/121a21fd7599
- [3/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
https://git.kernel.org/bluetooth/bluetooth-next/c/92f51644e1cf
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2025-11-07 19:10 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-11-05 5:50 [PATCH 0/3] Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT Max Chou
2025-11-05 5:50 ` [PATCH 1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F " Max Chou
2025-11-05 5:50 ` [PATCH 2/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 " Max Chou
2025-11-05 5:50 ` [PATCH 3/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 " Max Chou
2025-11-07 19:10 ` [PATCH 0/3] Bluetooth: btusb: Add new VID/PID " patchwork-bot+bluetooth
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®