Re: [PATCH net-next v4 1/4] dt-bindings: net: ftgmac100: Add delay properties for AST2600

["Rob Herring (Arm)" <robh@kernel.org>]

On Mon, 10 Nov 2025 19:09:25 +0800, Jacky Chou wrote:
> The AST2600 contains two dies, each with its own MAC, and these MACs
> require different delay configurations.
> Previously, these delay values were configured during the bootloader
> stage rather than in the driver. This change introduces the use of the
> standard properties defined in ethernet-controller.yaml to configure
> the delay values directly in the driver.
> 
> Add the new property, "aspeed,rgmii-delay-ps", to specify per step of
> RGMII delay in different MACs. And for Aspeed platform, the total steps
> of RGMII delay configuraion is 32 steps, so the total delay is
> "apseed,rgmii-delay-ps' * 32.
> Default delay values are declared so that tx-internal-delay-ps and
> rx-internal-delay-ps become optional. If these properties are not present,
> the driver will use the default values instead.
> Add conditional schema constraints for Aspeed AST2600 MAC controllers:
> - For MAC0/1, aspeed,rgmii-delay-ps property is 45 ps
> - For MAC2/3, aspeed,rgmii-delay-ps property is 250 ps
> - Both require the "aspeed,scu" and "aspeed,rgmii-delay-ps" properties.
> Other compatible values remain unrestricted.
> 
> Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
> ---
>  .../devicetree/bindings/net/faraday,ftgmac100.yaml | 35 ++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml: properties:aspeed,rgmii-delay-ps: 'anyOf' conditional failed, one must be fixed:
	'maxItems' is a required property
		hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values.
	'type' is not one of ['maxItems', 'description', 'deprecated']
		hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values.
	Additional properties are not allowed ('type' was unexpected)
		hint: Arrays must be described with a combination of minItems/maxItems/items
	'type' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf']
	hint: cell array properties must define how many entries and what the entries are when there is more than one entry.
	from schema $id: http://devicetree.org/meta-schemas/cell.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml: properties:aspeed,rgmii-delay-ps:type: 'integer' is not one of ['boolean', 'object']
	from schema $id: http://devicetree.org/meta-schemas/core.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251110-rgmii_delay_2600-v4-1-5cad32c766f7@aspeedtech.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.