* [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3533 for RTL8821CE
@ 2025-11-19 7:33 Gongwei Li
2025-12-01 20:00 ` patchwork-bot+bluetooth
0 siblings, 1 reply; 2+ messages in thread
From: Gongwei Li @ 2025-11-19 7:33 UTC (permalink / raw)
To: marcel, luiz.dentz; +Cc: linux-bluetooth, linux-kernel, Gongwei Li
From: Gongwei Li <ligongwei@kylinos.cn>
Add VID 13d3 & PID 3533 for Realtek RTL8821CE USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3533 Rev= 1.10
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Gongwei Li <ligongwei@kylinos.cn>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index fcc62e2fb..49ae202a2 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -504,6 +504,8 @@ static const struct usb_device_id quirks_table[] = {
/* Realtek 8821CE Bluetooth devices */
{ USB_DEVICE(0x13d3, 0x3529), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x13d3, 0x3533), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Realtek 8822CE Bluetooth devices */
{ USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK |
--
2.25.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3533 for RTL8821CE
2025-11-19 7:33 [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3533 for RTL8821CE Gongwei Li
@ 2025-12-01 20:00 ` patchwork-bot+bluetooth
0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+bluetooth @ 2025-12-01 20:00 UTC (permalink / raw)
To: Gongwei Li; +Cc: marcel, luiz.dentz, linux-bluetooth, linux-kernel, ligongwei
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:
On Wed, 19 Nov 2025 15:33:38 +0800 you wrote:
> From: Gongwei Li <ligongwei@kylinos.cn>
>
> Add VID 13d3 & PID 3533 for Realtek RTL8821CE USB Bluetooth chip.
>
> The information in /sys/kernel/debug/usb/devices about the Bluetooth
> device is listed as the below.
>
> [...]
Here is the summary with links:
- Bluetooth: btusb: Add new VID/PID 13d3/3533 for RTL8821CE
https://git.kernel.org/bluetooth/bluetooth-next/c/b02695809572
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-12-01 20:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-11-19 7:33 [PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3533 for RTL8821CE Gongwei Li
2025-12-01 20:00 ` patchwork-bot+bluetooth
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®