* [PATCH net-next v3 1/2] dt-bindings: net: dsa: lantiq,gswip: add MaxLinear R(G)MII slew rate
@ 2026-01-05 17:58 A. Sverdlin
2026-01-06 19:08 ` Rob Herring (Arm)
0 siblings, 1 reply; 2+ messages in thread
From: A. Sverdlin @ 2026-01-05 17:58 UTC (permalink / raw)
To: netdev
Cc: Alexander Sverdlin, Hauke Mehrtens, Andrew Lunn, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree,
linux-kernel, Daniel Golle
From: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Add new slew-rate uint32 property. This property is only applicable for
ports in R(G)MII mode and allows for slew rate reduction in comparison to
"normal" default configuration with the purpose to reduce radiated
emissions.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
---
Changelog:
v3:
- use [pinctrl] standard "slew-rate" property as suggested by Rob
https://lore.kernel.org/all/20251219204324.GA3881969-robh@kernel.org/
v2:
- unchanged
.../devicetree/bindings/net/dsa/lantiq,gswip.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
index 205b683849a53..277b121b159d5 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
@@ -111,6 +111,13 @@ patternProperties:
description:
Configure the RMII reference clock to be a clock output
rather than an input. Only applicable for RMII mode.
+ slew-rate:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ Configure R(G)MII TXD/TXC pads' slew rate:
+ 0: "normal"
+ 1: "slow"
tx-internal-delay-ps:
enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500]
description:
--
2.52.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH net-next v3 1/2] dt-bindings: net: dsa: lantiq,gswip: add MaxLinear R(G)MII slew rate
2026-01-05 17:58 [PATCH net-next v3 1/2] dt-bindings: net: dsa: lantiq,gswip: add MaxLinear R(G)MII slew rate A. Sverdlin
@ 2026-01-06 19:08 ` Rob Herring (Arm)
0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring (Arm) @ 2026-01-06 19:08 UTC (permalink / raw)
To: A. Sverdlin
Cc: David S. Miller, Jakub Kicinski, devicetree, Daniel Golle,
Krzysztof Kozlowski, linux-kernel, Eric Dumazet, Paolo Abeni,
Andrew Lunn, netdev, Conor Dooley, Hauke Mehrtens,
Vladimir Oltean
On Mon, 05 Jan 2026 18:58:21 +0100, A. Sverdlin wrote:
> From: Alexander Sverdlin <alexander.sverdlin@siemens.com>
>
> Add new slew-rate uint32 property. This property is only applicable for
> ports in R(G)MII mode and allows for slew rate reduction in comparison to
> "normal" default configuration with the purpose to reduce radiated
> emissions.
>
> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
> ---
> Changelog:
> v3:
> - use [pinctrl] standard "slew-rate" property as suggested by Rob
> https://lore.kernel.org/all/20251219204324.GA3881969-robh@kernel.org/
> v2:
> - unchanged
>
> .../devicetree/bindings/net/dsa/lantiq,gswip.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-01-06 19:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-01-05 17:58 [PATCH net-next v3 1/2] dt-bindings: net: dsa: lantiq,gswip: add MaxLinear R(G)MII slew rate A. Sverdlin
2026-01-06 19:08 ` Rob Herring (Arm)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®