mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "tip-bot2 for Peter Zijlstra" <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>,
	x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [tip: sched/core] rseq: Move slice_ext_nsec to debugfs
Date: Thu, 22 Jan 2026 10:15:38 -0000	[thread overview]
Message-ID: <176907693853.510.6603938718127476691.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20260121143207.923520192@infradead.org>

The following commit has been merged into the sched/core branch of tip:

Commit-ID:     e1d7f54900f1e1d3003a85b78cd7105a64203ff7
Gitweb:        https://git.kernel.org/tip/e1d7f54900f1e1d3003a85b78cd7105a64203ff7
Author:        Peter Zijlstra <peterz@infradead.org>
AuthorDate:    Wed, 21 Jan 2026 14:21:51 +01:00
Committer:     Peter Zijlstra <peterz@infradead.org>
CommitterDate: Thu, 22 Jan 2026 11:11:20 +01:00

rseq: Move slice_ext_nsec to debugfs

Move changing the slice ext duration to debugfs, a sliglty less permanent
interface.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260121143207.923520192@infradead.org
---
 Documentation/admin-guide/sysctl/kernel.rst | 11 +---
 Documentation/userspace-api/rseq.rst        |  4 +-
 kernel/rseq.c                               | 69 +++++++++++++-------
 3 files changed, 49 insertions(+), 35 deletions(-)

diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index b09d18e..239da22 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -1248,17 +1248,6 @@ reboot-cmd (SPARC only)
 ROM/Flash boot loader. Maybe to tell it what to do after
 rebooting. ???
 
-rseq_slice_extension_nsec
-=========================
-
-A task can request to delay its scheduling if it is in a critical section
-via the prctl(PR_RSEQ_SLICE_EXTENSION_SET) mechanism. This sets the maximum
-allowed extension in nanoseconds before scheduling of the task is enforced.
-Default value is 10000ns (10us). The possible range is 10000ns (10us) to
-50000ns (50us).
-
-This value has a direct correlation to the worst case scheduling latency;
-increment at your own risk.
 
 sched_energy_aware
 ==================
diff --git a/Documentation/userspace-api/rseq.rst b/Documentation/userspace-api/rseq.rst
index e1fdb0d..29af6c3 100644
--- a/Documentation/userspace-api/rseq.rst
+++ b/Documentation/userspace-api/rseq.rst
@@ -79,7 +79,9 @@ slice extension by setting rseq::slice_ctrl::request to 1. If the thread is
 interrupted and the interrupt results in a reschedule request in the
 kernel, then the kernel can grant a time slice extension and return to
 userspace instead of scheduling out. The length of the extension is
-determined by the ``rseq_slice_extension_nsec`` sysctl.
+determined by debugfs:rseq/slice_ext_nsec. The default value is 10 usec; which
+is the minimum value. It can be incremented to 50 usecs, however doing so
+can/will affect the minimum scheduling latency.
 
 The kernel indicates the grant by clearing rseq::slice_ctrl::request and
 setting rseq::slice_ctrl::granted to 1. If there is a reschedule of the
diff --git a/kernel/rseq.c b/kernel/rseq.c
index 1c5490a..e423a9b 100644
--- a/kernel/rseq.c
+++ b/kernel/rseq.c
@@ -123,7 +123,6 @@ void __rseq_trace_ip_fixup(unsigned long ip, unsigned long start_ip,
 }
 #endif /* CONFIG_TRACEPOINTS */
 
-#ifdef CONFIG_DEBUG_FS
 #ifdef CONFIG_RSEQ_STATS
 DEFINE_PER_CPU(struct rseq_stats, rseq_stats);
 
@@ -222,16 +221,19 @@ static const struct file_operations debug_ops = {
 	.release	= single_release,
 };
 
+static void rseq_slice_ext_init(struct dentry *root_dir);
+
 static int __init rseq_debugfs_init(void)
 {
 	struct dentry *root_dir = debugfs_create_dir("rseq", NULL);
 
 	debugfs_create_file("debug", 0644, root_dir, NULL, &debug_ops);
 	rseq_stats_init(root_dir);
+	if (IS_ENABLED(CONFIG_RSEQ_SLICE_EXTENSION))
+		rseq_slice_ext_init(root_dir);
 	return 0;
 }
 __initcall(rseq_debugfs_init);
-#endif /* CONFIG_DEBUG_FS */
 
 static bool rseq_set_ids(struct task_struct *t, struct rseq_ids *ids, u32 node_id)
 {
@@ -515,7 +517,9 @@ struct slice_timer {
 	void		*cookie;
 };
 
-unsigned int rseq_slice_ext_nsecs __read_mostly = 10 * NSEC_PER_USEC;
+static const unsigned int rseq_slice_ext_nsecs_min = 10 * NSEC_PER_USEC;
+static const unsigned int rseq_slice_ext_nsecs_max = 50 * NSEC_PER_USEC;
+unsigned int rseq_slice_ext_nsecs __read_mostly = rseq_slice_ext_nsecs_min;
 static DEFINE_PER_CPU(struct slice_timer, slice_timer);
 DEFINE_STATIC_KEY_TRUE(rseq_slice_extension_key);
 
@@ -761,30 +765,48 @@ SYSCALL_DEFINE0(rseq_slice_yield)
 	return yielded;
 }
 
-#ifdef CONFIG_SYSCTL
-static const unsigned int rseq_slice_ext_nsecs_min = 10 * NSEC_PER_USEC;
-static const unsigned int rseq_slice_ext_nsecs_max = 50 * NSEC_PER_USEC;
+static int rseq_slice_ext_show(struct seq_file *m, void *p)
+{
+	seq_printf(m, "%d\n", rseq_slice_ext_nsecs);
+	return 0;
+}
+
+static ssize_t rseq_slice_ext_write(struct file *file, const char __user *ubuf,
+				    size_t count, loff_t *ppos)
+{
+	unsigned int nsecs;
+
+	if (kstrtouint_from_user(ubuf, count, 10, &nsecs))
+		return -EINVAL;
+
+	if (nsecs < rseq_slice_ext_nsecs_min)
+		return -ERANGE;
 
-static const struct ctl_table rseq_slice_ext_sysctl[] = {
-	{
-		.procname	= "rseq_slice_extension_nsec",
-		.data		= &rseq_slice_ext_nsecs,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_douintvec_minmax,
-		.extra1		= (unsigned int *)&rseq_slice_ext_nsecs_min,
-		.extra2		= (unsigned int *)&rseq_slice_ext_nsecs_max,
-	},
+	if (nsecs > rseq_slice_ext_nsecs_max)
+		return -ERANGE;
+
+	rseq_slice_ext_nsecs = nsecs;
+
+	return count;
+}
+
+static int rseq_slice_ext_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, rseq_slice_ext_show, inode->i_private);
+}
+
+static const struct file_operations slice_ext_ops = {
+	.open		= rseq_slice_ext_open,
+	.read		= seq_read,
+	.write		= rseq_slice_ext_write,
+	.llseek		= seq_lseek,
+	.release	= single_release,
 };
 
-static void rseq_slice_sysctl_init(void)
+static void rseq_slice_ext_init(struct dentry *root_dir)
 {
-	if (rseq_slice_extension_enabled())
-		register_sysctl_init("kernel", rseq_slice_ext_sysctl);
+	debugfs_create_file("slice_ext_nsec", 0644, root_dir, NULL, &slice_ext_ops);
 }
-#else /* CONFIG_SYSCTL */
-static inline void rseq_slice_sysctl_init(void) { }
-#endif  /* !CONFIG_SYSCTL */
 
 static int __init rseq_slice_cmdline(char *str)
 {
@@ -807,8 +829,9 @@ static int __init rseq_slice_init(void)
 		hrtimer_setup(per_cpu_ptr(&slice_timer.timer, cpu), rseq_slice_expired,
 			      CLOCK_MONOTONIC, HRTIMER_MODE_REL_PINNED_HARD);
 	}
-	rseq_slice_sysctl_init();
 	return 0;
 }
 device_initcall(rseq_slice_init);
+#else
+static void rseq_slice_ext_init(struct dentry *root_dir) { }
 #endif /* CONFIG_RSEQ_SLICE_EXTENSION */

  parent reply	other threads:[~2026-01-22 10:15 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-21 14:24 [PATCH 0/5] rseq: Various slice-ext changes Peter Zijlstra
2026-01-21 14:24 ` [PATCH 1/5] rseq: Allow registering RSEQ with slice extension Peter Zijlstra
2026-01-22 10:15   ` [tip: sched/core] " tip-bot2 for Peter Zijlstra
2026-01-21 14:24 ` [PATCH 2/5] rseq: Move slice_ext_nsec to debugfs Peter Zijlstra
2026-01-21 14:50   ` Thomas Weißschuh
2026-01-21 14:56     ` Peter Zijlstra
2026-01-21 15:15     ` Peter Zijlstra
2026-01-22 10:15   ` tip-bot2 for Peter Zijlstra [this message]
2026-01-21 14:25 ` [PATCH 3/5] rseq: Lower default slice extension Peter Zijlstra
2026-01-22 10:15   ` [tip: sched/core] " tip-bot2 for Peter Zijlstra
2026-01-21 14:25 ` [PATCH 4/5] hrtimer: Fix trace oddity Peter Zijlstra
2026-01-22 10:15   ` [tip: sched/core] " tip-bot2 for Thomas Gleixner
2026-01-21 14:25 ` [PATCH 5/5] selftests/rseq: Add rseq slice histogram script Peter Zijlstra
2026-01-22 10:15   ` [tip: sched/core] " tip-bot2 for Peter Zijlstra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=176907693853.510.6603938718127476691.tip-bot2@tip-bot2 \
    --to=tip-bot2@linutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tip-commits@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®