Re: [PATCH 1/2] dt-bindings: thermal: qcom: add pm8901-temp-alarm

["Rob Herring (Arm)" <robh@kernel.org>]

On Sat, 30 May 2026 16:00:39 +0200, Herman van Hazendonk wrote:
> Add the binding for the temperature-alarm block inside the Qualcomm
> PM8901 PMIC (companion to the PM8058 on MSM8x60). The driver exposes
> the PM8901 die-temperature trip stages (105 / 125 / 145 C) to the
> thermal framework via a thermal-zone, with stage 3 wired as a
> critical trip so the kernel issues orderly_poweroff() when the part
> overheats.
> 
> The binding describes the SSBI sub-node address, the GIC interrupt
> the alarm raises on a stage transition, and the parent PMIC
> reference.
> 
> Signed-off-by: Herman van Hazendonk <github.com@herrie.org>
> ---
>  .../thermal/qcom,pm8901-temp-alarm.yaml       | 79 +++++++++++++++++++
>  1 file changed, 79 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/qcom,pm8901-temp-alarm.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/qcom,pm8901-temp-alarm.example.dtb: pmic (qcom,pm8901): 'temp-alarm@23' does not match any of the regexes: '^pinctrl-[0-9]+$', 'gpio@[0-9a-f]+$', 'keypad@[0-9a-f]+$', 'led@[0-9a-f]+$', 'mpps@[0-9a-f]+$', 'pwrkey@[0-9a-f]+$', 'rtc@[0-9a-f]+$', 'vibrator@[0-9a-f]+$', 'xoadc@[0-9a-f]+$'
	from schema $id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/qcom,pm8901-temp-alarm.example.dtb: pmic (qcom,pm8901): 'oneOf' conditional failed, one must be fixed:
	'interrupts' is a required property
	'interrupts-extended' is a required property
	from schema $id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/386f3cef9d50d61f588f99706d9f979c56f8bab8.1780148149.git.github.com@herrie.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.