[PATCH 2/2] irqchip: add MSM8x60 MPM wakeup interrupt controller driver

[Herman van Hazendonk <github.com@herrie.org>]

Add a driver for the MSM Power Manager (MPM) on the MSM8x60 family
(MSM8260/MSM8660/APQ8060). The MPM is a small wake-source controller
implemented in the always-on power domain that latches edge-triggered
interrupts during APPS power collapse and signals the RPM to wake the
APPS back up.

The driver:
  - implements an irqchip that wraps a parent GIC SPI line and
    overrides ->irq_set_wake() to enable the MPM mirror of the same
    interrupt;
  - exposes msm8660_mpm_set_pin_wake() etc. for consumers (e.g.
    mmci's SDC4 SDIO wake) that do not flow through irq_set_wake()
    directly;
  - communicates with the RPM via SMSM/syscon to apply the wake
    enable/clear bits and request a power collapse vote.

Used on the HP TouchPad (Tenderloin) for SDIO-attached Wi-Fi and
panel touch wake-from-suspend.

Signed-off-by: Herman van Hazendonk <github.com@herrie.org>
---
 drivers/irqchip/Kconfig           |  23 ++
 drivers/irqchip/Makefile          |   1 +
 drivers/irqchip/irq-msm8660-mpm.c | 627 ++++++++++++++++++++++++++++++
 include/soc/qcom/msm8660-mpm.h    |  80 ++++
 4 files changed, 731 insertions(+)
 create mode 100644 drivers/irqchip/irq-msm8660-mpm.c
 create mode 100644 include/soc/qcom/msm8660-mpm.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index e755a2a05209..35598a56ac79 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -525,6 +525,29 @@ config QCOM_MPM
 	  MSM Power Manager driver to manage and configure wakeup
 	  IRQs for Qualcomm Technologies Inc (QTI) mobile chips.
 
+config QCOM_MSM8660_MPM
+	bool "MSM8x60 MPM wakeup interrupt controller"
+	depends on ARCH_QCOM
+	depends on MFD_SYSCON
+	depends on MAILBOX
+	select IRQ_DOMAIN_HIERARCHY
+	default y
+	help
+	  Platform driver for the MSM Power Manager (MPM) wakeup interrupt
+	  controller on the MSM8x60 family (MSM8260/MSM8660/APQ8060). The vMPM registers live inside
+	  the RPM control block, which makes the generic QCOM_MPM driver
+	  unusable here (it assumes a dedicated MPM SRAM region, an IPCC
+	  mailbox, and uses IRQCHIP_DECLARE early-init that races platform
+	  device creation).
+
+	  This driver replicates the legacy 2.6.35-palm arch/arm/mach-msm/
+	  mpm.c mechanism as a regular platform driver, accessing the vMPM
+	  registers via a syscon phandle to the RPM block and signaling the
+	  MPM via the qcom-apcs-ipc mailbox (writing to GCC + 0x008 bit 1).
+
+	  Required for cpuidle deep-sleep states (SPC/PC) and for
+	  WoWLAN-style wake-from-suspend on MSM8x60 SoCs.
+
 config CSKY_MPINTC
 	bool
 	depends on CSKY
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 26aa3b6ec99f..3e64591f0f5b 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -100,6 +100,7 @@ obj-$(CONFIG_MESON_IRQ_GPIO)		+= irq-meson-gpio.o
 obj-$(CONFIG_GOLDFISH_PIC) 		+= irq-goldfish-pic.o
 obj-$(CONFIG_QCOM_PDC)			+= qcom-pdc.o
 obj-$(CONFIG_QCOM_MPM)			+= irq-qcom-mpm.o
+obj-$(CONFIG_QCOM_MSM8660_MPM)		+= irq-msm8660-mpm.o
 obj-$(CONFIG_CSKY_MPINTC)		+= irq-csky-mpintc.o
 obj-$(CONFIG_CSKY_APB_INTC)		+= irq-csky-apb-intc.o
 obj-$(CONFIG_RISCV_INTC)		+= irq-riscv-intc.o
diff --git a/drivers/irqchip/irq-msm8660-mpm.c b/drivers/irqchip/irq-msm8660-mpm.c
new file mode 100644
index 000000000000..c579d1476e01
--- /dev/null
+++ b/drivers/irqchip/irq-msm8660-mpm.c
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MSM8x60 family (MSM8260/MSM8660/APQ8060) MPM (MSM Power Manager) wakeup interrupt controller
+ *
+ * The MPM is an always-on hardware block that keeps a small set of wake
+ * sources alive while the application processor is powered down for
+ * cpuidle Power Collapse or suspend-to-RAM. On MSM8x60 the
+ * vMPM (virtual MPM) registers live INSIDE the RPM's 4 KB control block
+ * at:
+ *
+ *   request (control) regs: RPM_BASE + 0x9d8  (ENABLE, DETECT_CTL,
+ *                                              POLARITY, CLEAR)
+ *   status (pending) regs:  RPM_BASE + 0xdf8  (== 0x9d8 + 0x420)
+ *
+ * The mainline qcom-mpm driver (drivers/irqchip/irq-qcom-mpm.c) is
+ * fundamentally incompatible with this layout:
+ *   - it assumes a dedicated MPM SRAM region separate from RPM;
+ *   - it assumes a mailbox controller (IPCC) for wake notification;
+ *   - it uses IRQCHIP_DECLARE which runs before platform devices exist,
+ *     so of_find_device_by_node() returns NULL and the init silently
+ *     hangs.
+ *
+ * This driver replicates the 2.6.35-palm `arch/arm/mach-msm/mpm.c`
+ * mechanism as a regular platform driver: probes after platform
+ * infrastructure is ready, accesses RPM via a syscon phandle, and uses
+ * the qcom-apcs-ipc mailbox for wake notification (writing to
+ * GCC + 0x008 bit 1).
+ *
+ * Two consumer interfaces:
+ *
+ *   1. Hierarchical irqdomain: for MPM pins that map to GIC SPIs (USB,
+ *      HDMI, ...). Consumers wire their interrupts through this
+ *      controller via interrupts-extended and the kernel manages
+ *      enable / mask / set_type via the IRQ subsystem. This is the
+ *      mainline-recommended path for IRQ-mappable wake sources.
+ *
+ *   2. Raw-pin API: for MPM pins that do NOT correspond to a GIC IRQ
+ *      (SDC3_DAT1=21, SDC3_DAT3=22, SDC4_DAT1=23, SDC4_DAT3=24).
+ *      These are physical wake-signal lines monitored by MPM
+ *      directly. Consumers (mmci for SDC4 wake) call
+ *      msm8660_mpm_set_pin_wake() etc. to twiddle the MPM enable
+ *      register for these "raw" pins.
+ *
+ * Copyright (c) 2026, Herman van Hazendonk <github.com@herrie.org>
+ * Copyright (c) 2010-2012, The Linux Foundation (legacy mpm.c reference)
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mailbox_client.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+
+#include <soc/qcom/msm8660-mpm.h>
+
+/* vMPM register offsets (relative to RPM base + 0x9d8). Each register is
+ * a window of two 32-bit slots since MPM exposes 64 wake pins.
+ */
+#define MSM8660_MPM_REG_ENABLE		0x00
+#define MSM8660_MPM_REG_DETECT_CTL	0x08
+#define MSM8660_MPM_REG_POLARITY	0x10
+#define MSM8660_MPM_REG_CLEAR		0x18
+
+/* Status registers at +0x420 from vMPM base (== RPM + 0xdf8). */
+#define MSM8660_MPM_STATUS_OFFSET	0x420
+
+#define MSM8660_MPM_PIN_COUNT		64
+#define MSM8660_MPM_REG_WIDTH		2
+
+struct msm8660_mpm_pin {
+	int pin;
+	int hwirq;
+};
+
+struct msm8660_mpm {
+	struct device *dev;
+	struct regmap *regmap;
+	unsigned int regmap_offset;
+	struct irq_domain *domain;
+	struct msm8660_mpm_pin *pin_map;
+	unsigned int pin_map_count;
+	int parent_irq;
+	raw_spinlock_t lock;
+	struct mbox_client mbox_client;
+	struct mbox_chan *mbox_chan;
+};
+
+/* Singleton — there is only one MPM instance per SoC. The pin-API
+ * lookup helpers (msm8660_mpm_get()) return this.
+ */
+static struct msm8660_mpm *msm8660_mpm_global;
+
+static u32 msm8660_mpm_read(struct msm8660_mpm *mpm, unsigned int reg)
+{
+	u32 val;
+	regmap_read(mpm->regmap, mpm->regmap_offset + reg, &val);
+	return val;
+}
+
+static void msm8660_mpm_write(struct msm8660_mpm *mpm, unsigned int reg,
+			      u32 val)
+{
+	regmap_write(mpm->regmap, mpm->regmap_offset + reg, val);
+}
+
+static int msm8660_mpm_pin_to_hwirq(struct msm8660_mpm *mpm, int pin)
+{
+	int i;
+
+	for (i = 0; i < mpm->pin_map_count; i++) {
+		if (mpm->pin_map[i].pin == pin)
+			return mpm->pin_map[i].hwirq;
+	}
+	return -ENOENT;
+}
+
+/*
+ * IPC handler: MPM fires this IRQ when one or more enabled wake pins
+ * have pending activity. Read pending status, for each pin look up the
+ * corresponding GIC hwirq (if mapped), replay it through the
+ * irqdomain, then clear the pending bit.
+ */
+static irqreturn_t msm8660_mpm_irq(int irq, void *data)
+{
+	struct msm8660_mpm *mpm = data;
+	unsigned long pending[MSM8660_MPM_REG_WIDTH];
+	unsigned long enable[MSM8660_MPM_REG_WIDTH];
+	int i, j;
+
+	for (i = 0; i < MSM8660_MPM_REG_WIDTH; i++) {
+		pending[i] = msm8660_mpm_read(mpm,
+			MSM8660_MPM_STATUS_OFFSET + i * 4);
+		enable[i] = msm8660_mpm_read(mpm,
+			MSM8660_MPM_REG_ENABLE + i * 4);
+	}
+
+	for (i = 0; i < MSM8660_MPM_REG_WIDTH; i++) {
+		unsigned long bits = pending[i] & enable[i];
+
+		for_each_set_bit(j, &bits, 32) {
+			int pin = i * 32 + j;
+			int hwirq = msm8660_mpm_pin_to_hwirq(mpm, pin);
+
+			if (hwirq >= 0) {
+				dev_dbg(mpm->dev, "wake pin %d -> hwirq %d\n",
+					pin, hwirq);
+				generic_handle_domain_irq(mpm->domain, hwirq);
+			}
+		}
+
+		if (bits)
+			msm8660_mpm_write(mpm,
+				MSM8660_MPM_REG_CLEAR + i * 4, bits);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void msm8660_mpm_enable_hwirq(struct irq_data *d, bool enable)
+{
+	struct msm8660_mpm *mpm = irq_data_get_irq_chip_data(d);
+	unsigned long flags;
+	int i, pin = -1;
+	u32 val;
+
+	for (i = 0; i < mpm->pin_map_count; i++) {
+		if (mpm->pin_map[i].hwirq == d->hwirq) {
+			pin = mpm->pin_map[i].pin;
+			break;
+		}
+	}
+
+	if (pin < 0)
+		return;
+
+	raw_spin_lock_irqsave(&mpm->lock, flags);
+
+	val = msm8660_mpm_read(mpm,
+		MSM8660_MPM_REG_ENABLE + (pin / 32) * 4);
+	if (enable)
+		val |= BIT(pin % 32);
+	else
+		val &= ~BIT(pin % 32);
+	msm8660_mpm_write(mpm,
+		MSM8660_MPM_REG_ENABLE + (pin / 32) * 4, val);
+
+	raw_spin_unlock_irqrestore(&mpm->lock, flags);
+}
+
+static void msm8660_mpm_mask_irq(struct irq_data *d)
+{
+	msm8660_mpm_enable_hwirq(d, false);
+	irq_chip_mask_parent(d);
+}
+
+static void msm8660_mpm_unmask_irq(struct irq_data *d)
+{
+	msm8660_mpm_enable_hwirq(d, true);
+	irq_chip_unmask_parent(d);
+}
+
+static int msm8660_mpm_set_type(struct irq_data *d, unsigned int type)
+{
+	struct msm8660_mpm *mpm = irq_data_get_irq_chip_data(d);
+	unsigned long flags;
+	int i, pin = -1;
+	u32 detect, polarity;
+
+	for (i = 0; i < mpm->pin_map_count; i++) {
+		if (mpm->pin_map[i].hwirq == d->hwirq) {
+			pin = mpm->pin_map[i].pin;
+			break;
+		}
+	}
+
+	if (pin < 0)
+		return -ENOENT;
+
+	raw_spin_lock_irqsave(&mpm->lock, flags);
+
+	detect = msm8660_mpm_read(mpm,
+		MSM8660_MPM_REG_DETECT_CTL + (pin / 32) * 4);
+	polarity = msm8660_mpm_read(mpm,
+		MSM8660_MPM_REG_POLARITY + (pin / 32) * 4);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		detect |= BIT(pin % 32);
+		polarity |= BIT(pin % 32);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		detect |= BIT(pin % 32);
+		polarity &= ~BIT(pin % 32);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		detect &= ~BIT(pin % 32);
+		polarity |= BIT(pin % 32);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		detect &= ~BIT(pin % 32);
+		polarity &= ~BIT(pin % 32);
+		break;
+	default:
+		raw_spin_unlock_irqrestore(&mpm->lock, flags);
+		return -EINVAL;
+	}
+
+	msm8660_mpm_write(mpm,
+		MSM8660_MPM_REG_DETECT_CTL + (pin / 32) * 4, detect);
+	msm8660_mpm_write(mpm,
+		MSM8660_MPM_REG_POLARITY + (pin / 32) * 4, polarity);
+
+	raw_spin_unlock_irqrestore(&mpm->lock, flags);
+
+	return irq_chip_set_type_parent(d, type);
+}
+
+static struct irq_chip msm8660_mpm_chip = {
+	.name			= "msm8660-mpm",
+	.irq_mask		= msm8660_mpm_mask_irq,
+	.irq_unmask		= msm8660_mpm_unmask_irq,
+	.irq_set_type		= msm8660_mpm_set_type,
+	.irq_eoi		= irq_chip_eoi_parent,
+	.irq_set_affinity	= irq_chip_set_affinity_parent,
+	.flags			= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int msm8660_mpm_domain_alloc(struct irq_domain *domain,
+				    unsigned int virq,
+				    unsigned int nr_irqs, void *data)
+{
+	struct msm8660_mpm *mpm = domain->host_data;
+	struct irq_fwspec *fwspec = data;
+	struct irq_fwspec parent_fwspec;
+	int hwirq, ret;
+
+	if (fwspec->param_count != 2)
+		return -EINVAL;
+
+	hwirq = fwspec->param[0];
+
+	parent_fwspec.fwnode = domain->parent->fwnode;
+	parent_fwspec.param_count = 3;
+	parent_fwspec.param[0] = 0;	/* GIC_SPI */
+	parent_fwspec.param[1] = hwirq;
+	parent_fwspec.param[2] = fwspec->param[1];
+
+	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+					   &parent_fwspec);
+	if (ret)
+		return ret;
+
+	irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
+				      &msm8660_mpm_chip, mpm);
+
+	return 0;
+}
+
+static const struct irq_domain_ops msm8660_mpm_domain_ops = {
+	.alloc	= msm8660_mpm_domain_alloc,
+	.free	= irq_domain_free_irqs_common,
+	.translate = irq_domain_translate_twocell,
+};
+
+/* ===================================================================
+ * Raw-pin API for wake sources without a GIC IRQ mapping (SDC3/4 DATx)
+ * ===================================================================
+ *
+ * These helpers operate on MPM pins directly via the ENABLE / DETECT_CTL
+ * / POLARITY registers. Used by consumer drivers (mmci for SDC4 wake)
+ * that need to monitor a physical signal line via MPM but don't have a
+ * corresponding GIC interrupt to route through the irqdomain.
+ */
+
+/**
+ * msm8660_mpm_get() - get a handle to the MPM device
+ * @np: device node of the consumer (used for phandle lookup)
+ * @propname: phandle property name; if NULL, returns the singleton
+ *            without phandle verification.
+ *
+ * Returns the singleton MPM handle, or ERR_PTR(-EPROBE_DEFER) if the
+ * MPM driver hasn't probed yet.
+ */
+struct msm8660_mpm *msm8660_mpm_get(struct device_node *np,
+				    const char *propname)
+{
+	struct device_node *mpm_np;
+
+	if (!msm8660_mpm_global)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	if (np && propname) {
+		mpm_np = of_parse_phandle(np, propname, 0);
+		if (!mpm_np)
+			return ERR_PTR(-ENOENT);
+		of_node_put(mpm_np);
+	}
+
+	return msm8660_mpm_global;
+}
+EXPORT_SYMBOL_GPL(msm8660_mpm_get);
+
+/**
+ * msm8660_mpm_enable_pin() - enable/disable MPM monitoring of a pin
+ * @mpm: handle from msm8660_mpm_get()
+ * @pin: MPM pin index (0..63)
+ * @enable: true to monitor, false to ignore
+ *
+ * Programs the ENABLE register directly. Intended for "raw" wake pins
+ * (SDC3_DAT1=21, SDC3_DAT3=22, SDC4_DAT1=23, SDC4_DAT3=24) that have no
+ * GIC IRQ mapping. For pins that DO have a GIC mapping (in
+ * qcom,mpm-pin-map), use the irqdomain path instead.
+ */
+int msm8660_mpm_enable_pin(struct msm8660_mpm *mpm, unsigned int pin,
+			   bool enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (!mpm || pin >= MSM8660_MPM_PIN_COUNT)
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&mpm->lock, flags);
+	val = msm8660_mpm_read(mpm,
+		MSM8660_MPM_REG_ENABLE + (pin / 32) * 4);
+	if (enable)
+		val |= BIT(pin % 32);
+	else
+		val &= ~BIT(pin % 32);
+	msm8660_mpm_write(mpm,
+		MSM8660_MPM_REG_ENABLE + (pin / 32) * 4, val);
+	raw_spin_unlock_irqrestore(&mpm->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(msm8660_mpm_enable_pin);
+
+/**
+ * msm8660_mpm_set_pin_wake() - mark a pin as wake-capable
+ * @mpm: handle
+ * @pin: MPM pin index
+ * @on:  true to allow this pin to wake the system, false to clear.
+ *
+ * Equivalent to msm8660_mpm_enable_pin() on MSM8660 — the hardware has
+ * a single ENABLE register, not separate enable + wake masks. The name
+ * is kept for API parity with the legacy mpm.h interface so consumers
+ * can express the wake-source intent explicitly.
+ */
+int msm8660_mpm_set_pin_wake(struct msm8660_mpm *mpm, unsigned int pin,
+			     bool on)
+{
+	return msm8660_mpm_enable_pin(mpm, pin, on);
+}
+EXPORT_SYMBOL_GPL(msm8660_mpm_set_pin_wake);
+
+/**
+ * msm8660_mpm_set_pin_type() - set trigger type for a raw MPM pin
+ * @mpm: handle
+ * @pin: MPM pin index
+ * @flow_type: standard IRQ_TYPE_* constants
+ *
+ * On MSM8660 the trigger config is split across DETECT_CTL (edge vs
+ * level) and POLARITY (rising/high vs falling/low).
+ */
+int msm8660_mpm_set_pin_type(struct msm8660_mpm *mpm, unsigned int pin,
+			     unsigned int flow_type)
+{
+	unsigned long flags;
+	u32 detect, polarity;
+	bool edge, polarity_high;
+
+	if (!mpm || pin >= MSM8660_MPM_PIN_COUNT)
+		return -EINVAL;
+
+	edge = !!(flow_type & IRQ_TYPE_EDGE_BOTH);
+	polarity_high = !!(flow_type & (IRQ_TYPE_EDGE_RISING |
+					IRQ_TYPE_LEVEL_HIGH));
+
+	raw_spin_lock_irqsave(&mpm->lock, flags);
+
+	detect = msm8660_mpm_read(mpm,
+		MSM8660_MPM_REG_DETECT_CTL + (pin / 32) * 4);
+	polarity = msm8660_mpm_read(mpm,
+		MSM8660_MPM_REG_POLARITY + (pin / 32) * 4);
+
+	if (edge)
+		detect |= BIT(pin % 32);
+	else
+		detect &= ~BIT(pin % 32);
+
+	if (polarity_high)
+		polarity |= BIT(pin % 32);
+	else
+		polarity &= ~BIT(pin % 32);
+
+	msm8660_mpm_write(mpm,
+		MSM8660_MPM_REG_DETECT_CTL + (pin / 32) * 4, detect);
+	msm8660_mpm_write(mpm,
+		MSM8660_MPM_REG_POLARITY + (pin / 32) * 4, polarity);
+
+	raw_spin_unlock_irqrestore(&mpm->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(msm8660_mpm_set_pin_type);
+
+/* ===================================================================
+ * Platform driver
+ * ===================================================================
+ */
+
+static int msm8660_mpm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct msm8660_mpm *mpm;
+	struct irq_domain *parent_domain;
+	struct device_node *parent_np;
+	int ret, i;
+	u32 offset;
+
+	if (msm8660_mpm_global) {
+		dev_err(dev, "only one MPM instance is supported\n");
+		return -EBUSY;
+	}
+
+	mpm = devm_kzalloc(dev, sizeof(*mpm), GFP_KERNEL);
+	if (!mpm)
+		return -ENOMEM;
+
+	mpm->dev = dev;
+	raw_spin_lock_init(&mpm->lock);
+
+	mpm->regmap = syscon_regmap_lookup_by_phandle(np, "qcom,rpm-syscon");
+	if (IS_ERR(mpm->regmap)) {
+		dev_err(dev, "failed to get RPM syscon: %ld\n",
+			PTR_ERR(mpm->regmap));
+		return PTR_ERR(mpm->regmap);
+	}
+
+	ret = of_property_read_u32(np, "qcom,mpm-offset", &offset);
+	if (ret) {
+		dev_err(dev, "failed to read qcom,mpm-offset: %d\n", ret);
+		return ret;
+	}
+	mpm->regmap_offset = offset;
+
+	dev_info(dev, "vMPM registers at RPM offset 0x%x\n", offset);
+
+	/* Parse pin map (IRQ-mapped wake pins; raw pins like SDC4_DAT1 are
+	 * not listed here — they're accessed via the pin-API below).
+	 */
+	ret = of_property_count_u32_elems(np, "qcom,mpm-pin-map");
+	if (ret < 0 || ret % 2) {
+		dev_err(dev, "invalid qcom,mpm-pin-map\n");
+		return -EINVAL;
+	}
+
+	mpm->pin_map_count = ret / 2;
+	mpm->pin_map = devm_kcalloc(dev, mpm->pin_map_count,
+				    sizeof(*mpm->pin_map), GFP_KERNEL);
+	if (!mpm->pin_map)
+		return -ENOMEM;
+
+	for (i = 0; i < mpm->pin_map_count; i++) {
+		u32 pin, hwirq;
+
+		of_property_read_u32_index(np, "qcom,mpm-pin-map",
+					   i * 2, &pin);
+		of_property_read_u32_index(np, "qcom,mpm-pin-map",
+					   i * 2 + 1, &hwirq);
+
+		mpm->pin_map[i].pin = pin;
+		mpm->pin_map[i].hwirq = hwirq;
+
+		dev_dbg(dev, "pin map: pin %d -> hwirq %d\n", pin, hwirq);
+	}
+
+	parent_np = of_irq_find_parent(np);
+	if (!parent_np) {
+		dev_err(dev, "failed to find parent interrupt controller\n");
+		return -ENODEV;
+	}
+
+	parent_domain = irq_find_host(parent_np);
+	of_node_put(parent_np);
+	if (!parent_domain) {
+		dev_err(dev, "failed to find parent IRQ domain\n");
+		return -ENODEV;
+	}
+
+	mpm->domain = irq_domain_create_hierarchy(parent_domain, 0,
+						  MSM8660_MPM_PIN_COUNT,
+						  of_fwnode_handle(np),
+						  &msm8660_mpm_domain_ops,
+						  mpm);
+	if (!mpm->domain) {
+		dev_err(dev, "failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	mpm->parent_irq = platform_get_irq(pdev, 0);
+	if (mpm->parent_irq < 0) {
+		ret = mpm->parent_irq;
+		goto err_remove_domain;
+	}
+
+	ret = devm_request_irq(dev, mpm->parent_irq, msm8660_mpm_irq,
+			       IRQF_TRIGGER_HIGH | IRQF_NO_SUSPEND,
+			       "msm8660-mpm", mpm);
+	if (ret) {
+		dev_err(dev, "failed to request IRQ %d: %d\n",
+			mpm->parent_irq, ret);
+		goto err_remove_domain;
+	}
+
+	/* Mailbox channel for poking MPM to re-read its config (writes to
+	 * GCC + 0x008 bit 1 via the qcom-apcs-ipc mailbox).
+	 */
+	mpm->mbox_client.dev = dev;
+	mpm->mbox_client.knows_txdone = true;
+	mpm->mbox_chan = mbox_request_channel(&mpm->mbox_client, 0);
+	if (IS_ERR(mpm->mbox_chan)) {
+		dev_warn(dev, "no mailbox channel: %ld (continuing)\n",
+			 PTR_ERR(mpm->mbox_chan));
+		mpm->mbox_chan = NULL;
+	}
+
+	platform_set_drvdata(pdev, mpm);
+	msm8660_mpm_global = mpm;
+
+	dev_info(dev, "ready: %d pin mappings, irq=%d\n",
+		 mpm->pin_map_count, mpm->parent_irq);
+
+	return 0;
+
+err_remove_domain:
+	irq_domain_remove(mpm->domain);
+	return ret;
+}
+
+static void msm8660_mpm_remove(struct platform_device *pdev)
+{
+	struct msm8660_mpm *mpm = platform_get_drvdata(pdev);
+
+	msm8660_mpm_global = NULL;
+	if (mpm->mbox_chan)
+		mbox_free_channel(mpm->mbox_chan);
+	irq_domain_remove(mpm->domain);
+}
+
+static const struct of_device_id msm8660_mpm_of_match[] = {
+	{ .compatible = "qcom,msm8660-mpm" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, msm8660_mpm_of_match);
+
+static struct platform_driver msm8660_mpm_driver = {
+	.probe		= msm8660_mpm_probe,
+	.remove		= msm8660_mpm_remove,
+	.driver		= {
+		.name	= "msm8660-mpm",
+		.of_match_table = msm8660_mpm_of_match,
+	},
+};
+
+static int __init msm8660_mpm_init(void)
+{
+	return platform_driver_register(&msm8660_mpm_driver);
+}
+subsys_initcall(msm8660_mpm_init);
+
+static void __exit msm8660_mpm_exit(void)
+{
+	platform_driver_unregister(&msm8660_mpm_driver);
+}
+module_exit(msm8660_mpm_exit);
+
+MODULE_DESCRIPTION("Qualcomm MSM8x60 MPM wakeup interrupt controller");
+MODULE_LICENSE("GPL");
diff --git a/include/soc/qcom/msm8660-mpm.h b/include/soc/qcom/msm8660-mpm.h
new file mode 100644
index 000000000000..118748ad6960
--- /dev/null
+++ b/include/soc/qcom/msm8660-mpm.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Qualcomm MSM8x60 family (MSM8260/MSM8660/APQ8060) MPM wake-source consumer interface.
+ *
+ * The MPM driver lives at drivers/irqchip/irq-msm8660-mpm.c. It exposes
+ * TWO interfaces:
+ *
+ *  1. Hierarchical irqdomain (preferred). For wake sources that map to
+ *     GIC SPIs (USB1_HS, HDMI, ...). Consumers wire their IRQ through
+ *     the MPM via `interrupts-extended = <&msm8660_mpm ...>` in DT and
+ *     the IRQ subsystem manages enable / mask / set_type via the
+ *     irqdomain alloc path. No explicit C API call needed.
+ *
+ *  2. Raw-pin API (this header). For wake sources that do NOT have a
+ *     GIC IRQ mapping: SDC3_DAT1=21, SDC3_DAT3=22, SDC4_DAT1=23,
+ *     SDC4_DAT3=24. These are physical wake-signal lines that MPM
+ *     monitors directly. mmci (for SDC4 WiFi wake) obtains a handle
+ *     via msm8660_mpm_get() and uses the helpers below.
+ */
+
+#ifndef __SOC_QCOM_MSM8660_MPM_H__
+#define __SOC_QCOM_MSM8660_MPM_H__
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/irq.h>
+
+#define MSM8660_MPM_NR_PINS	64
+
+/* Well-known wake-source pin indices (from the legacy 2.6.35-palm tree). */
+#define MSM8660_MPM_PIN_SDC3_DAT1	21
+#define MSM8660_MPM_PIN_SDC3_DAT3	22
+#define MSM8660_MPM_PIN_SDC4_DAT1	23
+#define MSM8660_MPM_PIN_SDC4_DAT3	24
+
+struct device_node;
+struct msm8660_mpm;
+
+#if IS_ENABLED(CONFIG_QCOM_MSM8660_MPM)
+
+struct msm8660_mpm *msm8660_mpm_get(struct device_node *np,
+				    const char *propname);
+
+int msm8660_mpm_set_pin_wake(struct msm8660_mpm *mpm, unsigned int pin,
+			     bool on);
+int msm8660_mpm_enable_pin(struct msm8660_mpm *mpm, unsigned int pin,
+			   bool enable);
+int msm8660_mpm_set_pin_type(struct msm8660_mpm *mpm, unsigned int pin,
+			     unsigned int flow_type);
+
+#else /* !CONFIG_QCOM_MSM8660_MPM */
+
+static inline struct msm8660_mpm *
+msm8660_mpm_get(struct device_node *np, const char *propname)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline int msm8660_mpm_set_pin_wake(struct msm8660_mpm *mpm,
+					   unsigned int pin, bool on)
+{
+	return -ENODEV;
+}
+
+static inline int msm8660_mpm_enable_pin(struct msm8660_mpm *mpm,
+					 unsigned int pin, bool enable)
+{
+	return -ENODEV;
+}
+
+static inline int msm8660_mpm_set_pin_type(struct msm8660_mpm *mpm,
+					   unsigned int pin,
+					   unsigned int flow_type)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_QCOM_MSM8660_MPM */
+
+#endif /* __SOC_QCOM_MSM8660_MPM_H__ */
-- 
2.43.0