* [PATCH] arm64: dts: qcom: glymur: fix QUP serial engine IRQs
@ 2026-06-11 17:22 Bjorn Andersson
2026-06-11 23:04 ` Dmitry Baryshkov
2026-07-02 23:40 ` Bjorn Andersson
0 siblings, 2 replies; 5+ messages in thread
From: Bjorn Andersson @ 2026-06-11 17:22 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Pankaj Patil, Taniya Das,
Manaf Meethalavalappu Pallikunhi, Jyothi Kumar Seerapu,
Jishnu Prakash
Cc: Maulik Shah, Sibi Sankar, Kamal Wadhwa, linux-arm-msm,
devicetree, linux-kernel, Bjorn Andersson
The Geni serial-engine interrupts from QUP wrapper 0 all fall in ESPI
INTIDs space. While some of the i2c instances has gotten their
interrupt specifiers corrected, even the other functions on the same
serial-engines are wrong.
Ensure that all the serial engine interrupts for QUP wrapper 0 matches
the datasheet.
Assisted-by: Codex:GPT-5.5
Fixes: 41b6e8db400c ("arm64: dts: qcom: Introduce Glymur base dtsi")
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/glymur.dtsi | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index 20b49af7298e..2271ac080ccb 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -1876,7 +1876,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
spi0: spi@b80000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x00b80000 0x0 0x4000>;
- interrupts = <GIC_SPI 1052 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1903,7 +1903,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
i2c1: i2c@b84000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x00b84000 0x0 0x4000>;
- interrupts = <GIC_SPI 1053 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1930,7 +1930,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
spi1: spi@b84000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x00b84000 0x0 0x4000>;
- interrupts = <GIC_SPI 1053 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1957,7 +1957,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
i2c2: i2c@b88000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x00b88000 0x0 0x4000>;
- interrupts = <GIC_SPI 1054 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1984,7 +1984,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
spi2: spi@b88000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x00b88000 0x0 0x4000>;
- interrupts = <GIC_SPI 1054 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -2011,7 +2011,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
uart2: serial@b88000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00b88000 0x0 0x4000>;
- interrupts = <GIC_SPI 1054 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -2056,7 +2056,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
spi3: spi@b8c000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x00b8c000 0x0 0x4000>;
- interrupts = <GIC_SPI 1055 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -2110,7 +2110,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
spi4: spi@b90000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x00b90000 0x0 0x4000>;
- interrupts = <GIC_SPI 1056 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -2164,7 +2164,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
spi5: spi@b94000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x00b94000 0x0 0x4000>;
- interrupts = <GIC_SPI 1057 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -2191,7 +2191,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
i2c6: i2c@b98000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x00b98000 0x0 0x4000>;
- interrupts = <GIC_SPI 1058 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -2218,7 +2218,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
spi6: spi@b98000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x00b98000 0x0 0x4000>;
- interrupts = <GIC_SPI 1058 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -2245,7 +2245,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
i2c7: i2c@b9c000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x00b9c000 0x0 0x4000>;
- interrupts = <GIC_SPI 1059 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -2272,7 +2272,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
spi7: spi@b9c000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x00b9c000 0x0 0x4000>;
- interrupts = <GIC_SPI 1059 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_ESPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
clock-names = "se";
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
---
base-commit: ec039126b7fac4e3af35ebccaa7c6f9b6875ba81
change-id: 20260611-glymur-geni-irqs-1f796376a62d
Best regards,
--
Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] arm64: dts: qcom: glymur: fix QUP serial engine IRQs
2026-06-11 17:22 [PATCH] arm64: dts: qcom: glymur: fix QUP serial engine IRQs Bjorn Andersson
@ 2026-06-11 23:04 ` Dmitry Baryshkov
2026-06-28 2:44 ` Bjorn Andersson
2026-07-02 23:40 ` Bjorn Andersson
1 sibling, 1 reply; 5+ messages in thread
From: Dmitry Baryshkov @ 2026-06-11 23:04 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Pankaj Patil, Taniya Das,
Manaf Meethalavalappu Pallikunhi, Jyothi Kumar Seerapu,
Jishnu Prakash, Maulik Shah, Sibi Sankar, Kamal Wadhwa,
linux-arm-msm, devicetree, linux-kernel
On Thu, Jun 11, 2026 at 05:22:37PM +0000, Bjorn Andersson wrote:
> The Geni serial-engine interrupts from QUP wrapper 0 all fall in ESPI
> INTIDs space. While some of the i2c instances has gotten their
> interrupt specifiers corrected, even the other functions on the same
> serial-engines are wrong.
>
> Ensure that all the serial engine interrupts for QUP wrapper 0 matches
> the datasheet.
>
> Assisted-by: Codex:GPT-5.5
> Fixes: 41b6e8db400c ("arm64: dts: qcom: Introduce Glymur base dtsi")
> Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
> ---
> arch/arm64/boot/dts/qcom/glymur.dtsi | 26 +++++++++++++-------------
> 1 file changed, 13 insertions(+), 13 deletions(-)
What about the SPI / I2C controllers which are a part of qupv3_1?
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] arm64: dts: qcom: glymur: fix QUP serial engine IRQs
2026-06-11 23:04 ` Dmitry Baryshkov
@ 2026-06-28 2:44 ` Bjorn Andersson
2026-06-28 12:58 ` Dmitry Baryshkov
0 siblings, 1 reply; 5+ messages in thread
From: Bjorn Andersson @ 2026-06-28 2:44 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Pankaj Patil, Taniya Das,
Manaf Meethalavalappu Pallikunhi, Jyothi Kumar Seerapu,
Jishnu Prakash, Maulik Shah, Sibi Sankar, Kamal Wadhwa,
linux-arm-msm, devicetree, linux-kernel
On Fri, Jun 12, 2026 at 02:04:05AM +0300, Dmitry Baryshkov wrote:
> On Thu, Jun 11, 2026 at 05:22:37PM +0000, Bjorn Andersson wrote:
> > The Geni serial-engine interrupts from QUP wrapper 0 all fall in ESPI
> > INTIDs space. While some of the i2c instances has gotten their
> > interrupt specifiers corrected, even the other functions on the same
> > serial-engines are wrong.
> >
> > Ensure that all the serial engine interrupts for QUP wrapper 0 matches
> > the datasheet.
> >
> > Assisted-by: Codex:GPT-5.5
> > Fixes: 41b6e8db400c ("arm64: dts: qcom: Introduce Glymur base dtsi")
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
> > ---
> > arch/arm64/boot/dts/qcom/glymur.dtsi | 26 +++++++++++++-------------
> > 1 file changed, 13 insertions(+), 13 deletions(-)
>
> What about the SPI / I2C controllers which are a part of qupv3_1?
>
They are well inside the SPI range.
Regards,
Bjorn
>
> --
> With best wishes
> Dmitry
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] arm64: dts: qcom: glymur: fix QUP serial engine IRQs
2026-06-28 2:44 ` Bjorn Andersson
@ 2026-06-28 12:58 ` Dmitry Baryshkov
0 siblings, 0 replies; 5+ messages in thread
From: Dmitry Baryshkov @ 2026-06-28 12:58 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Pankaj Patil, Taniya Das,
Manaf Meethalavalappu Pallikunhi, Jyothi Kumar Seerapu,
Jishnu Prakash, Maulik Shah, Sibi Sankar, Kamal Wadhwa,
linux-arm-msm, devicetree, linux-kernel
On Sat, Jun 27, 2026 at 09:44:31PM -0500, Bjorn Andersson wrote:
> On Fri, Jun 12, 2026 at 02:04:05AM +0300, Dmitry Baryshkov wrote:
> > On Thu, Jun 11, 2026 at 05:22:37PM +0000, Bjorn Andersson wrote:
> > > The Geni serial-engine interrupts from QUP wrapper 0 all fall in ESPI
> > > INTIDs space. While some of the i2c instances has gotten their
> > > interrupt specifiers corrected, even the other functions on the same
> > > serial-engines are wrong.
> > >
> > > Ensure that all the serial engine interrupts for QUP wrapper 0 matches
> > > the datasheet.
> > >
> > > Assisted-by: Codex:GPT-5.5
> > > Fixes: 41b6e8db400c ("arm64: dts: qcom: Introduce Glymur base dtsi")
> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
> > > ---
> > > arch/arm64/boot/dts/qcom/glymur.dtsi | 26 +++++++++++++-------------
> > > 1 file changed, 13 insertions(+), 13 deletions(-)
> >
> > What about the SPI / I2C controllers which are a part of qupv3_1?
> >
>
> They are well inside the SPI range.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] arm64: dts: qcom: glymur: fix QUP serial engine IRQs
2026-06-11 17:22 [PATCH] arm64: dts: qcom: glymur: fix QUP serial engine IRQs Bjorn Andersson
2026-06-11 23:04 ` Dmitry Baryshkov
@ 2026-07-02 23:40 ` Bjorn Andersson
1 sibling, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2026-07-02 23:40 UTC (permalink / raw)
To: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Pankaj Patil, Taniya Das, Manaf Meethalavalappu Pallikunhi,
Jyothi Kumar Seerapu, Jishnu Prakash, Bjorn Andersson
Cc: Maulik Shah, Sibi Sankar, Kamal Wadhwa, linux-arm-msm,
devicetree, linux-kernel
On Thu, 11 Jun 2026 17:22:37 +0000, Bjorn Andersson wrote:
> The Geni serial-engine interrupts from QUP wrapper 0 all fall in ESPI
> INTIDs space. While some of the i2c instances has gotten their
> interrupt specifiers corrected, even the other functions on the same
> serial-engines are wrong.
>
> Ensure that all the serial engine interrupts for QUP wrapper 0 matches
> the datasheet.
>
> [...]
Applied, thanks!
[1/1] arm64: dts: qcom: glymur: fix QUP serial engine IRQs
commit: a74a98f956ef8e075f28d58507bc5dad7f937fb4
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2026-07-02 23:40 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-06-11 17:22 [PATCH] arm64: dts: qcom: glymur: fix QUP serial engine IRQs Bjorn Andersson
2026-06-11 23:04 ` Dmitry Baryshkov
2026-06-28 2:44 ` Bjorn Andersson
2026-06-28 12:58 ` Dmitry Baryshkov
2026-07-02 23:40 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®