[PATCH 1/2] dt-bindings: rockchip: pmu: Narrow definition of reboot-mode

[PATCH 1/2] dt-bindings: rockchip: pmu: Narrow definition of reboot-mode

[Krzysztof Kozlowski]

The 'reboot-mode' child of PMU node must be a syscon-reboot-mode one, so
add missing $ref to enforce the validation and disallow other
reboot-mode handlers.
Defining 'type: object' is on the other hand not necessary when other
schema is referenced.

This can be further restricted to match hardware/firmware:
syscon-reboot-mode schema allows arbitrary "mode-.* properties but only
a subset actually makes sense and is valid.  Provide negative look-ahead
pattern to disallow any modes not supported by the device, which
tightens the binding.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/arm/rockchip/pmu.yaml | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
index 55b2200d6e75..1cff2328cd01 100644
--- a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
@@ -61,7 +61,13 @@ properties:
     type: object
 
   reboot-mode:
-    type: object
+    $ref: /schemas/power/reset/syscon-reboot-mode.yaml
+    unevaluatedProperties: false
+
+    patternProperties:
+      # Negative look-ahead to disallow unsupported modes. The '$' has to be
+      # part of lookahead group to work, instead of trailing outside of ().
+      "^mode-(?!(bootloader$|loader$|normal$|recovery$))": false
 
 required:
   - compatible
-- 
2.53.0

[PATCH 2/2] dt-bindings: rockchip: grf: Narrow allowed reboot modes

[Krzysztof Kozlowski]

syscon-reboot-mode schema allows arbitrary "mode-.* properties but only
a subset actually makes sense and is valid.  Provide negative look-ahead
pattern to disallow any modes not supported by the device, which
tightens the binding.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 2cc43742b8e3..7bcb4e2f47ec 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -239,11 +239,14 @@ allOf:
       properties:
         reboot-mode:
           type: object
-
           $ref: /schemas/power/reset/syscon-reboot-mode.yaml#
-
           unevaluatedProperties: false
 
+          patternProperties:
+            # Negative look-ahead to disallow unsupported modes. The '$' has to be
+            # part of lookahead group to work, instead of trailing outside of ().
+            "^mode-(?!(bootloader$|fastboot$|loader$|normal$|recovery$))": false
+
   - if:
       properties:
         compatible:
-- 
2.53.0

Re: [PATCH 1/2] dt-bindings: rockchip: pmu: Narrow definition of reboot-mode

[Rob Herring (Arm)]

On Wed, 01 Jul 2026 12:58:50 +0200, Krzysztof Kozlowski wrote:
> The 'reboot-mode' child of PMU node must be a syscon-reboot-mode one, so
> add missing $ref to enforce the validation and disallow other
> reboot-mode handlers.
> Defining 'type: object' is on the other hand not necessary when other
> schema is referenced.
> 
> This can be further restricted to match hardware/firmware:
> syscon-reboot-mode schema allows arbitrary "mode-.* properties but only
> a subset actually makes sense and is valid.  Provide negative look-ahead
> pattern to disallow any modes not supported by the device, which
> tightens the binding.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> ---
>  Documentation/devicetree/bindings/arm/rockchip/pmu.yaml | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH 2/2] dt-bindings: rockchip: grf: Narrow allowed reboot modes

[Rob Herring (Arm)]

On Wed, 01 Jul 2026 12:58:51 +0200, Krzysztof Kozlowski wrote:
> syscon-reboot-mode schema allows arbitrary "mode-.* properties but only
> a subset actually makes sense and is valid.  Provide negative look-ahead
> pattern to disallow any modes not supported by the device, which
> tightens the binding.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> ---
>  Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH 1/2] dt-bindings: rockchip: pmu: Narrow definition of reboot-mode

[Heiko Stuebner]

On Wed, 01 Jul 2026 12:58:50 +0200, Krzysztof Kozlowski wrote:
> The 'reboot-mode' child of PMU node must be a syscon-reboot-mode one, so
> add missing $ref to enforce the validation and disallow other
> reboot-mode handlers.
> Defining 'type: object' is on the other hand not necessary when other
> schema is referenced.
> 
> This can be further restricted to match hardware/firmware:
> syscon-reboot-mode schema allows arbitrary "mode-.* properties but only
> a subset actually makes sense and is valid.  Provide negative look-ahead
> pattern to disallow any modes not supported by the device, which
> tightens the binding.
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: rockchip: pmu: Narrow definition of reboot-mode
      commit: c63037c69a5173dd87efde82bfa4c339adefd72e
[2/2] dt-bindings: rockchip: grf: Narrow allowed reboot modes
      commit: 39eace59ac826465fae0788d0a6b304ec94f9944

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>