[PATCH 0/2] ASoC: Add LPASS VA CSR HeartBeat pulse clock support

[PATCH 0/2] ASoC: Add LPASS VA CSR HeartBeat pulse clock support

[Sarath Ganapathiraju via B4 Relay]

The LPASS VA CSR block contains rate generator hardware that produces
a HeartBeat Pulse (also known as RateGen Pulse). This pulse
synchronizes the start of the DMAs and Codec Interfaces for the audio
usecases and can serve as a periodic wakeup source for the DSP.

This series adds the DT binding and driver support to model this
rate generator as a clock provider, and extends the VA macro binding
with a new hawi variant that consumes the heartbeatpulse clock
alongside its existing mclk, macro, and dcodec clocks.

Patch 1 adds the YAML binding for the new qcom,hawi-lpass-va-csr
clock provider node and extends qcom,lpass-va-macro to describe the
new qcom,hawi-lpass-va-macro compatible with its four-clock
constraint.

Patch 2 adds the lpass-va-csr driver that registers the
lpass_heartbeat_pulse clock and enables/disables the rate generator
via regmap when the clock consumer requests it.

Signed-off-by: Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
---
Sarath Ganapathiraju (2):
      ASoC: dt-bindings: qcom,lpass-va-csr: Add HeartBeat pulse clock
      ASoC: Add LPASS VA CSR heartbeat pulse clock

 .../bindings/sound/qcom,lpass-va-csr.yaml          |  47 +++++++
 .../bindings/sound/qcom,lpass-va-macro.yaml        |  18 +++
 sound/soc/codecs/Kconfig                           |  13 ++
 sound/soc/codecs/Makefile                          |   2 +
 sound/soc/codecs/lpass-va-csr.c                    | 143 +++++++++++++++++++++
 5 files changed, 223 insertions(+)
---
base-commit: bee763d5f341b99cf472afeb508d4988f62a6ca1
change-id: 20260714-master-ca87b5f19ae0

Best regards,
--  
Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>

[PATCH 1/2] ASoC: dt-bindings: qcom,lpass-va-csr: Add HeartBeat pulse clock

[Sarath Ganapathiraju via B4 Relay]

From: Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>

Add Qualcomm LPASS VA CSR rate generator node that exposes
the lpass_heartbeat_pulse clock on hawi. Also extend the
qcom,lpass-va-macro binding to add qcom,hawi-lpass-va-macro with
its four-clock constraint (mclk, macro, dcodec, heartbeatpulse).

The HeartBeat Pulse (also known as RateGen Pulse) synchronizes the
start of the DMAs and Codec Interfaces for the audio usecase
and can serve as a periodic wakeup source for the DSP.

Signed-off-by: Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
---
 .../bindings/sound/qcom,lpass-va-csr.yaml          | 47 ++++++++++++++++++++++
 .../bindings/sound/qcom,lpass-va-macro.yaml        | 18 +++++++++
 2 files changed, 65 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-csr.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-csr.yaml
new file mode 100644
index 000000000..794da92ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-csr.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-va-csr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS VA CSR heartbeat pulse clock provider
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
+  - Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
+
+description:
+  The LPASS VA CSR block contains the rate generator hardware which
+  produces the heartbeatpulse consumed by the Bolero codec macros
+  (rx, tx, wsa, va). It is modelled as a clock provider
+  so consumers can reference it by name in their clocks list.
+
+properties:
+  compatible:
+    enum:
+      - qcom,hawi-lpass-va-csr
+
+  reg:
+    maxItems: 1
+    description: Must cover the full VA CSR block (base 0x7EE0000, size 0xE000).
+
+  "#clock-cells":
+    const: 0
+    description:
+      Single clock output "lpass_heartbeat_pulse". Consumers reference
+      it by clock-name "heartbeatpulse" in their clocks list.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    va-csr@7ee0000 {
+      compatible = "qcom,hawi-lpass-va-csr";
+      reg = <0x0 0x07ee0000 0x0 0xe000>;
+      #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
index aea31fbda..ae4df8967 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
@@ -19,6 +19,7 @@ properties:
           - qcom,sm8450-lpass-va-macro
           - qcom,sm8550-lpass-va-macro
           - qcom,sc8280xp-lpass-va-macro
+          - qcom,hawi-lpass-va-macro
       - items:
           - enum:
               - qcom,eliza-lpass-va-macro
@@ -168,6 +169,23 @@ allOf:
             - const: macro
             - const: dcodec
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,hawi-lpass-va-macro
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: mclk
+            - const: macro
+            - const: dcodec
+            - const: heartbeatpulse
+
 unevaluatedProperties: false
 
 examples:

-- 
2.34.1

[PATCH 2/2] ASoC: Add LPASS VA CSR heartbeat pulse clock

[Sarath Ganapathiraju via B4 Relay]

From: Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>

The HeartBeat Pulse (also known as RateGen Pulse) synchronizes the
start of the DMAs and Codec Interfaces for the audio usecases
and can serve as a periodic wakeup source for the DSP.

Add the LPASS VA CSR driver that models the rate generator as a clock
provider so it is enabled and disabled automatically alongside the
other clocks during runtime PM resume and suspend.

Signed-off-by: Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
---
 sound/soc/codecs/Kconfig        |  13 ++++
 sound/soc/codecs/Makefile       |   2 +
 sound/soc/codecs/lpass-va-csr.c | 143 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 158 insertions(+)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index a41d0f508..e898c34a6 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -2902,11 +2902,24 @@ config SND_SOC_LPASS_WSA_MACRO
 	select SND_SOC_LPASS_MACRO_COMMON
 	tristate "Qualcomm WSA Macro in LPASS(Low Power Audio SubSystem)"
 
+config SND_SOC_LPASS_VA_CSR
+	depends on COMMON_CLK
+	select REGMAP_MMIO
+	tristate "Qualcomm LPASS VA CSR heartbeat pulse clock provider"
+	help
+	  Qualcomm LPASS VA CSR block contains the rate generator hardware
+	  that produces the HeartBeat Pulse (also known as RateGen Pulse).
+	  This driver models the rate generator as a clock provider so
+	  that consumers can enable or disable it via the common clock
+	  framework, and it can be used to synchronize the start of DMAs
+	  and Codec Interfaces or as a periodic wakeup source for the DSP.
+
 config SND_SOC_LPASS_VA_MACRO
 	depends on COMMON_CLK
 	depends on PM_CLK
 	select REGMAP_MMIO
 	select SND_SOC_LPASS_MACRO_COMMON
+	select SND_SOC_LPASS_VA_CSR
 	tristate "Qualcomm VA Macro in LPASS(Low Power Audio SubSystem)"
 
 config SND_SOC_LPASS_RX_MACRO
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index aa0396e5b..3e86c1bbf 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -163,6 +163,7 @@ snd-soc-lpass-rx-macro-y := lpass-rx-macro.o
 snd-soc-lpass-tx-macro-y := lpass-tx-macro.o
 snd-soc-lpass-wsa-macro-y := lpass-wsa-macro.o
 snd-soc-lpass-va-macro-y := lpass-va-macro.o
+snd-soc-lpass-va-csr-y := lpass-va-csr.o
 snd-soc-madera-y := madera.o
 snd-soc-max9759-y := max9759.o
 snd-soc-max9768-y := max9768.o
@@ -886,6 +887,7 @@ obj-$(CONFIG_SND_SOC_TPA6130A2)	+= snd-soc-tpa6130a2.o
 obj-$(CONFIG_SND_SOC_LPASS_MACRO_COMMON)	+= snd-soc-lpass-macro-common.o
 obj-$(CONFIG_SND_SOC_LPASS_WSA_MACRO)	+= snd-soc-lpass-wsa-macro.o
 obj-$(CONFIG_SND_SOC_LPASS_VA_MACRO)	+= snd-soc-lpass-va-macro.o
+obj-$(CONFIG_SND_SOC_LPASS_VA_CSR)	+= snd-soc-lpass-va-csr.o
 obj-$(CONFIG_SND_SOC_LPASS_RX_MACRO)	+= snd-soc-lpass-rx-macro.o
 obj-$(CONFIG_SND_SOC_LPASS_TX_MACRO)	+= snd-soc-lpass-tx-macro.o
 
diff --git a/sound/soc/codecs/lpass-va-csr.c b/sound/soc/codecs/lpass-va-csr.c
new file mode 100644
index 000000000..14aec8f94
--- /dev/null
+++ b/sound/soc/codecs/lpass-va-csr.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_clk.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define LPASS_RATE_GEN_CTRL		0xD000
+#define LPASS_RATE_GEN_COUNTER_0	0xD004
+#define LPASS_RATE_GEN_DELAY		0xD010
+
+#define LPASS_RATE_GEN_MAX_REG		LPASS_RATE_GEN_DELAY
+
+#define LPASS_RG_CTRL_EN		BIT(0)
+
+struct lpass_va_csr_data {
+	u32 counter_0;
+	u32 delay;
+};
+
+static const struct lpass_va_csr_data hawi_csr_data = {
+	.counter_0 = 0x960,
+	.delay = 0x16,
+};
+
+static const struct regmap_config lpass_rate_gen_regmap_config = {
+	.name = "lpass_rate_gen",
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = LPASS_RATE_GEN_MAX_REG,
+	.cache_type = REGCACHE_MAPLE,
+};
+
+struct lpass_va_csr {
+	struct regmap *regmap;
+	const struct lpass_va_csr_data *data;
+	struct clk_hw hb_hw;
+};
+
+#define to_lpass_va_csr(_hw) container_of(_hw, struct lpass_va_csr, hb_hw)
+
+static int heartbeat_pulse_enable(struct clk_hw *hw)
+{
+	struct lpass_va_csr *csr = to_lpass_va_csr(hw);
+
+	regmap_write(csr->regmap, LPASS_RATE_GEN_COUNTER_0, csr->data->counter_0);
+	regmap_write(csr->regmap, LPASS_RATE_GEN_DELAY, csr->data->delay);
+	regmap_update_bits(csr->regmap, LPASS_RATE_GEN_CTRL,
+			   LPASS_RG_CTRL_EN, LPASS_RG_CTRL_EN);
+
+	return 0;
+}
+
+static void heartbeat_pulse_disable(struct clk_hw *hw)
+{
+	struct lpass_va_csr *csr = to_lpass_va_csr(hw);
+
+	regmap_update_bits(csr->regmap, LPASS_RATE_GEN_CTRL,
+			   LPASS_RG_CTRL_EN, 0);
+}
+
+static int heartbeat_pulse_is_enabled(struct clk_hw *hw)
+{
+	struct lpass_va_csr *csr = to_lpass_va_csr(hw);
+	unsigned int val;
+
+	regmap_read(csr->regmap, LPASS_RATE_GEN_CTRL, &val);
+
+	return !!(val & LPASS_RG_CTRL_EN);
+}
+
+static const struct clk_ops heartbeat_pulse_ops = {
+	.enable = heartbeat_pulse_enable,
+	.disable = heartbeat_pulse_disable,
+	.is_enabled = heartbeat_pulse_is_enabled,
+};
+
+static int lpass_va_csr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lpass_va_csr *csr;
+	struct clk_init_data init = {
+		.name = "lpass_heartbeat_pulse",
+		.ops = &heartbeat_pulse_ops,
+	};
+	void __iomem *base;
+	int ret;
+
+	csr = devm_kzalloc(dev, sizeof(*csr), GFP_KERNEL);
+	if (!csr)
+		return -ENOMEM;
+
+	csr->data = of_device_get_match_data(dev);
+	if (!csr->data)
+		return dev_err_probe(dev, -EINVAL, "no variant data for compatible\n");
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	csr->regmap = devm_regmap_init_mmio(dev, base,
+					    &lpass_rate_gen_regmap_config);
+	if (IS_ERR(csr->regmap))
+		return dev_err_probe(dev, PTR_ERR(csr->regmap),
+				     "failed to init regmap\n");
+
+	csr->hb_hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &csr->hb_hw);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to register heartbeat clock\n");
+
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, &csr->hb_hw);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to add clock provider\n");
+
+	return 0;
+}
+
+static const struct of_device_id lpass_va_csr_dt_match[] = {
+	{ .compatible = "qcom,hawi-lpass-va-csr", .data = &hawi_csr_data },
+	{}
+};
+MODULE_DEVICE_TABLE(of, lpass_va_csr_dt_match);
+
+static struct platform_driver lpass_va_csr_driver = {
+	.driver = {
+		.name = "qcom-lpass-va-csr",
+		.of_match_table = lpass_va_csr_dt_match,
+	},
+	.probe = lpass_va_csr_probe,
+};
+
+module_platform_driver(lpass_va_csr_driver);
+
+MODULE_DESCRIPTION("Qualcomm LPASS VA CSR heartbeat pulse clock provider");
+MODULE_LICENSE("GPL");

-- 
2.34.1

Re: [PATCH 1/2] ASoC: dt-bindings: qcom,lpass-va-csr: Add HeartBeat pulse clock

[Rob Herring (Arm)]

On Tue, 14 Jul 2026 01:35:32 +0530, Sarath Ganapathiraju wrote:
> Add Qualcomm LPASS VA CSR rate generator node that exposes
> the lpass_heartbeat_pulse clock on hawi. Also extend the
> qcom,lpass-va-macro binding to add qcom,hawi-lpass-va-macro with
> its four-clock constraint (mclk, macro, dcodec, heartbeatpulse).
> 
> The HeartBeat Pulse (also known as RateGen Pulse) synchronizes the
> start of the DMAs and Codec Interfaces for the audio usecase
> and can serve as a periodic wakeup source for the DSP.
> 
> Signed-off-by: Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
> ---
>  .../bindings/sound/qcom,lpass-va-csr.yaml          | 47 ++++++++++++++++++++++
>  .../bindings/sound/qcom,lpass-va-macro.yaml        | 18 +++++++++
>  2 files changed, 65 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/qcom,lpass-va-csr.example.dtb: va-csr@7ee0000 (qcom,hawi-lpass-va-csr): reg: [[0, 133038080], [0, 57344]] is too long
	from schema $id: http://devicetree.org/schemas/sound/qcom,lpass-va-csr.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260714-master-v1-1-1ebe5993225e@oss.qualcomm.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 2/2] ASoC: Add LPASS VA CSR heartbeat pulse clock

[Konrad Dybcio]

On 7/13/26 10:05 PM, Sarath Ganapathiraju via B4 Relay wrote:
> From: Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
> 
> The HeartBeat Pulse (also known as RateGen Pulse) synchronizes the
> start of the DMAs and Codec Interfaces for the audio usecases
> and can serve as a periodic wakeup source for the DSP.
> 
> Add the LPASS VA CSR driver that models the rate generator as a clock
> provider so it is enabled and disabled automatically alongside the
> other clocks during runtime PM resume and suspend.
> 
> Signed-off-by: Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
> ---

[...]

> +#define LPASS_RATE_GEN_CTRL		0xD000
> +#define LPASS_RATE_GEN_COUNTER_0	0xD004
> +#define LPASS_RATE_GEN_DELAY		0xD010

lowercase hex, please

> +
> +#define LPASS_RATE_GEN_MAX_REG		LPASS_RATE_GEN_DELAY
> +
> +#define LPASS_RG_CTRL_EN		BIT(0)
> +
> +struct lpass_va_csr_data {
> +	u32 counter_0;
> +	u32 delay;
> +};
> +
> +static const struct lpass_va_csr_data hawi_csr_data = {
> +	.counter_0 = 0x960,
> +	.delay = 0x16,
> +};
> +
> +static const struct regmap_config lpass_rate_gen_regmap_config = {
> +	.name = "lpass_rate_gen",
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +	.max_register = LPASS_RATE_GEN_MAX_REG,
> +	.cache_type = REGCACHE_MAPLE,
> +};
> +
> +struct lpass_va_csr {
> +	struct regmap *regmap;
> +	const struct lpass_va_csr_data *data;
> +	struct clk_hw hb_hw;
> +};
> +
> +#define to_lpass_va_csr(_hw) container_of(_hw, struct lpass_va_csr, hb_hw)
> +
> +static int heartbeat_pulse_enable(struct clk_hw *hw)
> +{
> +	struct lpass_va_csr *csr = to_lpass_va_csr(hw);
> +
> +	regmap_write(csr->regmap, LPASS_RATE_GEN_COUNTER_0, csr->data->counter_0);
> +	regmap_write(csr->regmap, LPASS_RATE_GEN_DELAY, csr->data->delay);
> +	regmap_update_bits(csr->regmap, LPASS_RATE_GEN_CTRL,
> +			   LPASS_RG_CTRL_EN, LPASS_RG_CTRL_EN);

regmap_set_bits()

> +
> +	return 0;
> +}
> +
> +static void heartbeat_pulse_disable(struct clk_hw *hw)
> +{
> +	struct lpass_va_csr *csr = to_lpass_va_csr(hw);
> +
> +	regmap_update_bits(csr->regmap, LPASS_RATE_GEN_CTRL,
> +			   LPASS_RG_CTRL_EN, 0);

regmap_clear_bits()

> +}
> +
> +static int heartbeat_pulse_is_enabled(struct clk_hw *hw)
> +{
> +	struct lpass_va_csr *csr = to_lpass_va_csr(hw);
> +	unsigned int val;
> +
> +	regmap_read(csr->regmap, LPASS_RATE_GEN_CTRL, &val);
> +
> +	return !!(val & LPASS_RG_CTRL_EN);

regmap_test_bits()

Konrad

Re: [PATCH 1/2] ASoC: dt-bindings: qcom,lpass-va-csr: Add HeartBeat pulse clock

[Srinivas Kandagatla]

On 7/13/26 9:05 PM, Sarath Ganapathiraju via B4 Relay wrote:
> From: Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
> 
> Add Qualcomm LPASS VA CSR rate generator node that exposes
> the lpass_heartbeat_pulse clock on hawi. Also extend the
> qcom,lpass-va-macro binding to add qcom,hawi-lpass-va-macro with
> its four-clock constraint (mclk, macro, dcodec, heartbeatpulse).
> 
> The HeartBeat Pulse (also known as RateGen Pulse) synchronizes the
> start of the DMAs and Codec Interfaces for the audio usecase
> and can serve as a periodic wakeup source for the DSP.
> 
> Signed-off-by: Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
> ---
>  .../bindings/sound/qcom,lpass-va-csr.yaml          | 47 ++++++++++++++++++++++
>  .../bindings/sound/qcom,lpass-va-macro.yaml        | 18 +++++++++

Please split these into two patches, as you are adding two things in here.


--srini
>  2 files changed, 65 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-csr.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-csr.yaml
> new file mode 100644
> index 000000000..794da92ad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-csr.yaml
> @@ -0,0 +1,47 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,lpass-va-csr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm LPASS VA CSR heartbeat pulse clock provider
> +
> +maintainers:
> +  - Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
> +  - Sarath Ganapathiraju <sarath.ganapathiraju@oss.qualcomm.com>
> +
> +description:
> +  The LPASS VA CSR block contains the rate generator hardware which
> +  produces the heartbeatpulse consumed by the Bolero codec macros
> +  (rx, tx, wsa, va). It is modelled as a clock provider
> +  so consumers can reference it by name in their clocks list.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,hawi-lpass-va-csr
> +
> +  reg:
> +    maxItems: 1
> +    description: Must cover the full VA CSR block (base 0x7EE0000, size 0xE000).
> +
> +  "#clock-cells":
> +    const: 0
> +    description:
> +      Single clock output "lpass_heartbeat_pulse". Consumers reference
> +      it by clock-name "heartbeatpulse" in their clocks list.
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#clock-cells"
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    va-csr@7ee0000 {
> +      compatible = "qcom,hawi-lpass-va-csr";
> +      reg = <0x0 0x07ee0000 0x0 0xe000>;
> +      #clock-cells = <0>;
> +    };
> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
> index aea31fbda..ae4df8967 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
> @@ -19,6 +19,7 @@ properties:
>            - qcom,sm8450-lpass-va-macro
>            - qcom,sm8550-lpass-va-macro
>            - qcom,sc8280xp-lpass-va-macro
> +          - qcom,hawi-lpass-va-macro
>        - items:
>            - enum:
>                - qcom,eliza-lpass-va-macro
> @@ -168,6 +169,23 @@ allOf:
>              - const: macro
>              - const: dcodec
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,hawi-lpass-va-macro
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 4
> +          maxItems: 4
> +        clock-names:
> +          items:
> +            - const: mclk
> +            - const: macro
> +            - const: dcodec
> +            - const: heartbeatpulse
> +
>  unevaluatedProperties: false
>  
>  examples:
>