[PATCH v4 0/3] PCI: ultrarisc: Add DP1000 PCIe clock support

[PATCH v4 0/3] PCI: ultrarisc: Add DP1000 PCIe clock support

[Jia Wang via B4 Relay]

Add clock handling for the UltraRISC DP1000 DesignWare PCIe host
controller.

The DP1000 PCIe controller depends on three input clocks: core, dbi, and
aux. The driver accesses DBI registers during host initialization, so the
clocks must be enabled before the controller registers are touched.

This series documents the required clocks in the device tree binding,
enables the core, dbi, and aux clocks before DesignWare host
initialization, and keeps them managed across probe failure, detach, and
system suspend/resume. It also switches the driver to
module_platform_driver() so the existing tristate Kconfig option builds
correctly as a module.

Testing:
- Build and module build tested with ARCH=riscv.
- Boot tested on UltraRISC DP1000.
- Validated the PCIe binding with dt_binding_check and dtbs_check.

Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
---
Changes in v4:
- Use devm_clk_bulk_get_all() instead of hardcoding clock names in the driver.
- Drop clks_enabled and simplify the clock enable/disable helpers.
- Keep the suspend guard for the failed-resume case without disabling the
  clocks again when the guard is hit.
- Keep module_platform_driver(), but drop the .remove callback.
- Link to v3: https://patch.msgid.link/20260714-ultrarisc-pci-clk-v3-0-e72723fc0ef1@ultrarisc.com

Changes in v3:
- Track whether the PCIe clocks are enabled and make clock enable/disable
  helpers idempotent.
- Skip dw_pcie_suspend_noirq() when the controller is already suspended to
  avoid register access with clocks disabled after a failed resume.
- Disable clocks again if dw_pcie_resume_noirq() fails after clocks were
  re-enabled.
- Add a remove callback to deinitialize the DesignWare host when the module
  build support is added.
- Link to v2: https://patch.msgid.link/20260706-ultrarisc-pci-clk-v2-0-2f3fb6fba66b@ultrarisc.com

Changes in v2:
- Add Fixes and Acked-by tags to the binding patch.
- Add a Fixes tag to the driver clock handling patch.
- Fix the suspend/resume clock handling so clocks are disabled only after a
  successful suspend and kept enabled on resume failure.
- Add a module build fix by switching to module_platform_driver().
- Link to v1: https://patch.msgid.link/20260629-ultrarisc-pci-clk-v1-0-5ea3308fdab3@ultrarisc.com

To: Xincheng Zhang <zhangxincheng@ultrarisc.com>
To: Jia Wang <wangjia@ultrarisc.com>
To: Lorenzo Pieralisi <lpieralisi@kernel.org>
To: Krzysztof Wilczyński <kwilczynski@kernel.org>
To: Manivannan Sadhasivam <mani@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Cc: linux-pci@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

---
Jia Wang (3):
      dt-bindings: pci: ultrarisc: add required DP1000 PCIe clocks
      PCI: ultrarisc: get and enable DP1000 PCIe clocks
      PCI: ultrarisc: use module_platform_driver()

 .../bindings/pci/ultrarisc,dp1000-pcie.yaml        | 16 ++++
 drivers/pci/controller/dwc/pcie-ultrarisc.c        | 87 ++++++++++++++++++++--
 2 files changed, 95 insertions(+), 8 deletions(-)
---
base-commit: a13c140cc289c0b7b3770bce5b3ad42ab35074aa
change-id: 20260617-ultrarisc-pci-clk-ac19047af1ea

Best regards,
--  
Jia Wang <wangjia@ultrarisc.com>

[PATCH v4 1/3] dt-bindings: pci: ultrarisc: add required DP1000 PCIe clocks

[Jia Wang via B4 Relay]

From: Jia Wang <wangjia@ultrarisc.com>

Require the DP1000 PCIe controller nodes to provide clocks and
clock-names, using the standard DesignWare clock names "core",
"dbi", and "aux".

Fixes: d9ff07f45955 ("dt-bindings: PCI: Add UltraRISC DP1000 PCIe controller")
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../devicetree/bindings/pci/ultrarisc,dp1000-pcie.yaml   | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/ultrarisc,dp1000-pcie.yaml b/Documentation/devicetree/bindings/pci/ultrarisc,dp1000-pcie.yaml
index 512b935bf5d1..d9d1488e915a 100644
--- a/Documentation/devicetree/bindings/pci/ultrarisc,dp1000-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/ultrarisc,dp1000-pcie.yaml
@@ -43,6 +43,18 @@ properties:
       - description: Legacy INTC interrupt
       - description: Legacy INTD interrupt
 
+  clocks:
+    items:
+      - description: PCIe core clock
+      - description: Data Bus Interface (DBI) clock
+      - description: Auxiliary clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: dbi
+      - const: aux
+
   interrupt-names:
     items:
       - const: msi
@@ -55,6 +67,8 @@ required:
   - compatible
   - reg
   - reg-names
+  - clocks
+  - clock-names
   - interrupts
   - interrupt-names
 
@@ -71,6 +85,8 @@ examples:
         reg = <0x0 0x21000000 0x0 0x01000000>,
               <0x0 0x4fff0000 0x0 0x00010000>;
         reg-names = "dbi", "config";
+        clocks = <&clkc 9>, <&clkc 7>, <&clkc 10>;
+        clock-names = "core", "dbi", "aux";
         ranges = <0x81000000 0x0 0x4fbf0000 0x0 0x4fbf0000 0x0 0x00400000>,
                  <0x82000000 0x0 0x40000000 0x0 0x40000000 0x0 0x0fbf0000>,
                  <0xc3000000 0x40 0x00000000 0x40 0x00000000 0xd 0x00000000>;

-- 
2.34.1

[PATCH v4 2/3] PCI: ultrarisc: get and enable DP1000 PCIe clocks

[Jia Wang via B4 Relay]

From: Jia Wang <wangjia@ultrarisc.com>

Add the required core, dbi, and aux clocks for the DP1000 PCIe
controller and enable them before initializing the DesignWare host.

Also manage the clocks across system suspend and resume.

Fixes: 5fc35740c3b3 ("PCI: ultrarisc: Add UltraRISC DP1000 PCIe Root Complex driver")
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
---
 drivers/pci/controller/dwc/pcie-ultrarisc.c | 85 ++++++++++++++++++++++++++---
 1 file changed, 78 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-ultrarisc.c b/drivers/pci/controller/dwc/pcie-ultrarisc.c
index 6ee661ceff67..8e57135453b7 100644
--- a/drivers/pci/controller/dwc/pcie-ultrarisc.c
+++ b/drivers/pci/controller/dwc/pcie-ultrarisc.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2026 UltraRISC Technology (Shanghai) Co., Ltd.
  */
 
+#include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
@@ -23,6 +24,12 @@
 
 #define ULTRARISC_PCIE_COMP_TIMEOUT_65_210MS	0x6
 
+struct ultrarisc_pcie {
+	struct dw_pcie pci;
+	struct clk_bulk_data *clks;
+	int num_clks;
+};
+
 static struct pci_ops ultrarisc_pci_ops = {
 	.map_bus = dw_pcie_own_conf_map_bus,
 	.read = pci_generic_config_read32,
@@ -98,17 +105,47 @@ static const struct dw_pcie_ops dw_pcie_ops = {
 	.start_link = ultrarisc_pcie_start_link,
 };
 
+static int ultrarisc_pcie_enable_clks(struct ultrarisc_pcie *ultra)
+{
+	return clk_bulk_prepare_enable(ultra->num_clks, ultra->clks);
+}
+
+static void ultrarisc_pcie_disable_clks(void *data)
+{
+	struct ultrarisc_pcie *ultra = data;
+
+	clk_bulk_disable_unprepare(ultra->num_clks, ultra->clks);
+}
+
+static int ultrarisc_pcie_init_clks(struct ultrarisc_pcie *ultra)
+{
+	struct device *dev = ultra->pci.dev;
+	int ret;
+
+	ultra->num_clks = devm_clk_bulk_get_all(dev, &ultra->clks);
+	if (ultra->num_clks < 0)
+		return dev_err_probe(dev, ultra->num_clks, "Failed to get clocks\n");
+
+	ret = ultrarisc_pcie_enable_clks(ultra);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable clocks\n");
+
+	return devm_add_action_or_reset(dev, ultrarisc_pcie_disable_clks, ultra);
+}
+
 static int ultrarisc_pcie_probe(struct platform_device *pdev)
 {
+	struct ultrarisc_pcie *ultra;
 	struct device *dev = &pdev->dev;
 	struct dw_pcie_rp *pp;
 	struct dw_pcie *pci;
 	int ret;
 
-	pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
-	if (!pci)
+	ultra = devm_kzalloc(dev, sizeof(*ultra), GFP_KERNEL);
+	if (!ultra)
 		return -ENOMEM;
 
+	pci = &ultra->pci;
 	pci->dev = dev;
 	pci->ops = &dw_pcie_ops;
 
@@ -117,7 +154,11 @@ static int ultrarisc_pcie_probe(struct platform_device *pdev)
 
 	pp = &pci->pp;
 
-	platform_set_drvdata(pdev, pci);
+	platform_set_drvdata(pdev, ultra);
+
+	ret = ultrarisc_pcie_init_clks(ultra);
+	if (ret)
+		return ret;
 
 	pp->num_vectors = MAX_MSI_IRQS;
 	/* No L2/L3 Ready indication is available on this platform */
@@ -135,16 +176,46 @@ static int ultrarisc_pcie_probe(struct platform_device *pdev)
 
 static int ultrarisc_pcie_suspend_noirq(struct device *dev)
 {
-	struct dw_pcie *pci = dev_get_drvdata(dev);
+	struct ultrarisc_pcie *ultra = dev_get_drvdata(dev);
+	struct dw_pcie *pci = &ultra->pci;
+	int ret;
+
+	/*
+	 * A failed resume leaves the DWC suspended and the clocks disabled.
+	 * A later suspend must not access the controller or disable them again.
+	 */
+	if (pci->suspended)
+		return 0;
+
+	ret = dw_pcie_suspend_noirq(pci);
+	if (ret)
+		return ret;
+
+	if (pci->suspended)
+		ultrarisc_pcie_disable_clks(ultra);
 
-	return dw_pcie_suspend_noirq(pci);
+	return 0;
 }
 
 static int ultrarisc_pcie_resume_noirq(struct device *dev)
 {
-	struct dw_pcie *pci = dev_get_drvdata(dev);
+	struct ultrarisc_pcie *ultra = dev_get_drvdata(dev);
+	struct dw_pcie *pci = &ultra->pci;
+	int ret;
 
-	return dw_pcie_resume_noirq(pci);
+	if (pci->suspended) {
+		ret = ultrarisc_pcie_enable_clks(ultra);
+		if (ret)
+			return ret;
+
+		ret = dw_pcie_resume_noirq(pci);
+		if (ret) {
+			ultrarisc_pcie_disable_clks(ultra);
+			return ret;
+		}
+	}
+
+	return 0;
 }
 
 static const struct dev_pm_ops ultrarisc_pcie_pm_ops = {

-- 
2.34.1

[PATCH v4 3/3] PCI: ultrarisc: use module_platform_driver()

[Jia Wang via B4 Relay]

From: Jia Wang <wangjia@ultrarisc.com>

CONFIG_PCIE_ULTRARISC is a tristate option and may be built as a module.
Use module_platform_driver() so the driver uses the standard registration
helper for both built-in and module configurations.

Leave .remove unset because the driver registers an internal MSI
controller that cannot be safely disposed during removal.

Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
---
 drivers/pci/controller/dwc/pcie-ultrarisc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-ultrarisc.c b/drivers/pci/controller/dwc/pcie-ultrarisc.c
index 8e57135453b7..51e89180490d 100644
--- a/drivers/pci/controller/dwc/pcie-ultrarisc.c
+++ b/drivers/pci/controller/dwc/pcie-ultrarisc.c
@@ -240,7 +240,7 @@ static struct platform_driver ultrarisc_pcie_driver = {
 	},
 	.probe = ultrarisc_pcie_probe,
 };
-builtin_platform_driver(ultrarisc_pcie_driver);
+module_platform_driver(ultrarisc_pcie_driver);
 
 MODULE_DESCRIPTION("UltraRISC DP1000 DWC PCIe host controller");
 MODULE_LICENSE("GPL");

-- 
2.34.1

Re: [PATCH v4 0/3] PCI: ultrarisc: Add DP1000 PCIe clock support

[Manivannan Sadhasivam]

On Fri, 31 Jul 2026 09:14:27 +0800, Jia Wang wrote:
> Add clock handling for the UltraRISC DP1000 DesignWare PCIe host
> controller.
> 
> The DP1000 PCIe controller depends on three input clocks: core, dbi, and
> aux. The driver accesses DBI registers during host initialization, so the
> clocks must be enabled before the controller registers are touched.
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: pci: ultrarisc: add required DP1000 PCIe clocks
      commit: 1db733541d2ead366e0b894e1f15f1a4c4e86376
[2/3] PCI: ultrarisc: get and enable DP1000 PCIe clocks
      commit: a3564a2a610e24a0201736cafc44ec068d01cc2a
[3/3] PCI: ultrarisc: use module_platform_driver()
      commit: 30f22cc3ca904597193029929760186cf16033fe

Best regards,
-- 
மணிவண்ணன் சதாசிவம்