From: Jai Luthra <jai.luthra@ideasonboard.com>
To: Dave Stevenson <dave.stevenson@raspberrypi.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Alexander Shiyan <eagle.alexander923@gmail.com>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: Re: [PATCH RFC 3/4] media: i2c: imx678: Add imx662 support to the driver
Date: Thu, 03 Sep 2026 09:50:46 +0530 [thread overview]
Message-ID: <178840924662.11722.12680340547715469059@freya> (raw)
In-Reply-To: <20260805-media-starvis2-v1-3-91e8e4eae44f@raspberrypi.com>
Hi Dave,
Quoting Dave Stevenson (2026-08-05 21:39:18)
> IMX662 is a 1080p Starvis 2 sensor that follows the same programming
> pattern as IMX678, so add it to the newly parameterised driver.
>
> FIXME: Update the common registers based on the Sony spreadsheet.
>
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---
> drivers/media/i2c/imx678.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 64 insertions(+)
>
> diff --git a/drivers/media/i2c/imx678.c b/drivers/media/i2c/imx678.c
> index 40ba6661b366..9083f2744510 100644
> --- a/drivers/media/i2c/imx678.c
> +++ b/drivers/media/i2c/imx678.c
> @@ -673,6 +673,47 @@ const struct imx678_variant imx678_variant_def = {
> .hmax_min = imx678_min_hmax_4lane,
> };
>
> +static const struct cci_reg_sequence imx662_common_regs[] = {
> + { IMX678_REG_WDMODE, 0x00 },
> + { IMX678_REG_MDBIT, 0x01 },
> + { IMX678_REG_XXS_DRV, 0x00 },
> +};
> +
> +static const u16 imx662_min_hmax_4lane[] = {
> + [IMX678_LINK_FREQ_297MHZ] = 990,
> + [IMX678_LINK_FREQ_360MHZ] = 990,
> + [IMX678_LINK_FREQ_445MHZ] = 990,
> + [IMX678_LINK_FREQ_594MHZ] = 990,
> + [IMX678_LINK_FREQ_720MHZ] = 990,
> + [IMX678_LINK_FREQ_891MHZ] = 990,
> + [IMX678_LINK_FREQ_1039MHZ] = 990,
> + [IMX678_LINK_FREQ_1188MHZ] = 990,
> +};
> +
> +const struct imx678_variant imx662_variant_def = {
> + .name = "imx662",
> + .id_reg = IMX678_REG_MODULE_ID,
> + .id_value = 0x296,
> + .native_area = {
> + .top = 0,
> + .left = 0,
> + .width = 1937,
> + .height = 1101,
> + },
> + .active_area = {
> + .top = 0,
> + .left = 0,
> + .width = 1936,
> + .height = 1096,
> + },
> + .pixel_rate = 222750000,
> + .pix_per_clk = 3,
> + .common_regs = imx662_common_regs,
> + .num_common_regs = ARRAY_SIZE(imx662_common_regs),
> + .vmax_default = 1096 + 40,
From the IMX662 SRM I see the following constraints for minimum:
VTTL >= PIX_VWIDTH + 70
VTTL >= 820
And the table giving round FPS numbers like 30/60/90 assumes VMAX = 1250.
Did you manually verify that setting blanking to 40 also works?
Thanks,
Jai
> + .hmax_min = imx662_min_hmax_4lane,
> +};
> +
> struct imx678_model_info {
> enum imx678_type type;
> const u32 *codes;
> @@ -703,6 +744,26 @@ static const struct imx678_model_info imx678_autodetect_info = {
> .auto_detect_mono = &imx678_aamr_info,
> };
>
> +static const struct imx678_model_info imx662_aaqr_info = {
> + .type = IMX678_COLOR,
> + .codes = codes_bayer,
> + .num_codes = ARRAY_SIZE(codes_bayer),
> + .variant = &imx662_variant_def,
> +};
> +
> +static const struct imx678_model_info imx662_aamr_info = {
> + .type = IMX678_MONOCHROME,
> + .codes = codes_monochrome,
> + .num_codes = ARRAY_SIZE(codes_monochrome),
> + .variant = &imx662_variant_def,
> +};
> +
> +static const struct imx678_model_info imx662_autodetect_info = {
> + .variant = &imx662_variant_def,
> + .auto_detect_colour = &imx662_aaqr_info,
> + .auto_detect_mono = &imx662_aamr_info,
> +};
> +
> static const char * const imx678_supply_name[] = {
> "avdd", /* Analog (3.3V) supply */
> "dvdd", /* Digital Core (1.1V) supply */
> @@ -1470,8 +1531,11 @@ static const struct dev_pm_ops imx678_pm_ops = {
> static const struct of_device_id imx678_of_match[] = {
> { .compatible = "sony,imx678-aamr", .data = &imx678_aamr_info },
> { .compatible = "sony,imx678-aaqr", .data = &imx678_aaqr_info },
> + { .compatible = "sony,imx662-aamr", .data = &imx662_aamr_info },
> + { .compatible = "sony,imx662-aaqr", .data = &imx662_aaqr_info },
> /* for non-conforming DTs that rely on runtime check */
> { .compatible = "sony,imx678", .data = &imx678_autodetect_info },
> + { .compatible = "sony,imx662", .data = &imx662_autodetect_info },
> { /* sentinel */ }
> };
>
>
> --
> 2.34.1
>
next prev parent reply other threads:[~2026-09-03 4:20 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-05 16:09 [PATCH RFC 0/4] Update imx678 to act as a common Sony Starvis 2 driver Dave Stevenson
2026-08-05 16:09 ` [PATCH RFC 1/4] media: i2c: imx678: Always program the sensor in window mode Dave Stevenson
2026-09-03 4:16 ` Jai Luthra
2026-08-05 16:09 ` [PATCH RFC 2/4] media: i2c: imx678: Parameterise the configuration to allow for other models Dave Stevenson
2026-09-03 4:15 ` Jai Luthra
2026-08-05 16:09 ` [PATCH RFC 3/4] media: i2c: imx678: Add imx662 support to the driver Dave Stevenson
2026-09-03 4:20 ` Jai Luthra [this message]
2026-09-03 11:46 ` Dave Stevenson
2026-08-05 16:09 ` [PATCH RFC 4/4] media: i2c: imx678: Add imx675 " Dave Stevenson
2026-09-03 4:22 ` Jai Luthra
2026-09-03 11:54 ` Dave Stevenson
2026-09-03 12:24 ` Jai Luthra
2026-09-03 4:13 ` [PATCH RFC 0/4] Update imx678 to act as a common Sony Starvis 2 driver Jai Luthra
2026-09-03 11:55 ` Dave Stevenson
2026-09-03 12:25 ` Jai Luthra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=178840924662.11722.12680340547715469059@freya \
--to=jai.luthra@ideasonboard.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=eagle.alexander923@gmail.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®