* [PATCH v3] mfd: gateworks-gsc: Propagate I2C read errors
@ 2026-11-09 11:14 shao.mingyin
2026-11-18 20:37 ` Lee Jones
0 siblings, 1 reply; 2+ messages in thread
From: shao.mingyin @ 2026-11-09 11:14 UTC (permalink / raw)
To: lee, mfd; +Cc: tharvey, linux-kernel
From: Shao Mingyin <shao.mingyin@zte.com.cn>
gsc_read() retries the I2C transfer but then stores "ret & 0xff" in *val
and returns 0 even when the transfer failed. regmap_read() therefore
never reports an error, so the FW_VER check in gsc_probe() and the two
GSC_FW_CRC checks that this patch adds are dead code, and on a failed
read the firmware revision is built from the low byte of the negative
errno.
Return the error from gsc_read() before touching *val, so regmap_read()
and its callers see the failure; the FW_VER check and the two CRC checks
then work as intended.
Fixes: d85234994b2f ("mfd: Add Gateworks System Controller core driver")
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
---
This supersedes 5/5 of the RESEND series; 1/5-4/5 are unchanged.
v3:
- reword the commit message: the two GSC_FW_CRC checks are added by this
patch, so say that instead of referring to "the previous version"; the
second paragraph no longer calls them pre-existing. No code change
v2: https://lore.kernel.org/all/20261108151125513PyebyF3QC3r_DTxS9ZMf6@zte.com.cn/
v1: https://lore.kernel.org/all/20261107162125044ldKkwYPQxZOTWg6IDe_LX@zte.com.cn/
diff --git a/drivers/mfd/gateworks-gsc.c b/drivers/mfd/gateworks-gsc.c
--- a/drivers/mfd/gateworks-gsc.c
+++ b/drivers/mfd/gateworks-gsc.c
@@ -62,7 +62,10 @@ int gsc_read(void *context, unsigned int reg, unsigned int *val)
if (ret != -EAGAIN && ret != -EIO)
break;
}
- *val = ret & 0xff;
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
return 0;
}
@@ -219,9 +222,11 @@ static int gsc_probe(struct i2c_client *client)
return -EIO;
gsc->fwver = reg;
- regmap_read(gsc->regmap, GSC_FW_CRC, ®);
+ if (regmap_read(gsc->regmap, GSC_FW_CRC, ®))
+ return -EIO;
gsc->fwcrc = reg;
- regmap_read(gsc->regmap, GSC_FW_CRC + 1, ®);
+ if (regmap_read(gsc->regmap, GSC_FW_CRC + 1, ®))
+ return -EIO;
gsc->fwcrc |= reg << 8;
gsc->i2c_hwmon = devm_i2c_new_dummy_device(dev, client->adapter,
--
2.47.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH v3] mfd: gateworks-gsc: Propagate I2C read errors
2026-11-09 11:14 [PATCH v3] mfd: gateworks-gsc: Propagate I2C read errors shao.mingyin
@ 2026-11-18 20:37 ` Lee Jones
0 siblings, 0 replies; 2+ messages in thread
From: Lee Jones @ 2026-11-18 20:37 UTC (permalink / raw)
To: shao.mingyin; +Cc: mfd, tharvey, linux-kernel
On Mon, 09 Nov 2026, shao.mingyin@zte.com.cn wrote:
> From: Shao Mingyin <shao.mingyin@zte.com.cn>
>
> gsc_read() retries the I2C transfer but then stores "ret & 0xff" in *val
> and returns 0 even when the transfer failed. regmap_read() therefore
> never reports an error, so the FW_VER check in gsc_probe() and the two
> GSC_FW_CRC checks that this patch adds are dead code, and on a failed
> read the firmware revision is built from the low byte of the negative
> errno.
>
> Return the error from gsc_read() before touching *val, so regmap_read()
> and its callers see the failure; the FW_VER check and the two CRC checks
> then work as intended.
>
> Fixes: d85234994b2f ("mfd: Add Gateworks System Controller core driver")
> Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
> ---
> This supersedes 5/5 of the RESEND series; 1/5-4/5 are unchanged.
>
> v3:
> - reword the commit message: the two GSC_FW_CRC checks are added by this
> patch, so say that instead of referring to "the previous version"; the
> second paragraph no longer calls them pre-existing. No code change
> v2: https://lore.kernel.org/all/20261108151125513PyebyF3QC3r_DTxS9ZMf6@zte.com.cn/
> v1: https://lore.kernel.org/all/20261107162125044ldKkwYPQxZOTWg6IDe_LX@zte.com.cn/
>
> diff --git a/drivers/mfd/gateworks-gsc.c b/drivers/mfd/gateworks-gsc.c
> --- a/drivers/mfd/gateworks-gsc.c
> +++ b/drivers/mfd/gateworks-gsc.c
> @@ -62,7 +62,10 @@ int gsc_read(void *context, unsigned int reg, unsigned int *val)
> if (ret != -EAGAIN && ret != -EIO)
> break;
> }
> - *val = ret & 0xff;
> + if (ret < 0)
> + return ret;
> +
> + *val = ret;
>
> return 0;
> }
> @@ -219,9 +222,11 @@ static int gsc_probe(struct i2c_client *client)
> return -EIO;
> gsc->fwver = reg;
>
> - regmap_read(gsc->regmap, GSC_FW_CRC, ®);
> + if (regmap_read(gsc->regmap, GSC_FW_CRC, ®))
> + return -EIO;
Should we propagate the return value of regmap_read()?
Also, really not a fan of functions in if()s.
> gsc->fwcrc = reg;
> - regmap_read(gsc->regmap, GSC_FW_CRC + 1, ®);
> + if (regmap_read(gsc->regmap, GSC_FW_CRC + 1, ®))
> + return -EIO;
> gsc->fwcrc |= reg << 8;
>
> gsc->i2c_hwmon = devm_i2c_new_dummy_device(dev, client->adapter,
> --
> 2.47.0
--
Lee Jones
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-18 20:37 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-09 11:14 [PATCH v3] mfd: gateworks-gsc: Propagate I2C read errors shao.mingyin
2026-11-18 20:37 ` Lee Jones
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®