* [PATCH 1/6] dt-bindings: display: add VIEWE JD9365TX panel binding
@ 2026-11-19 2:48 Hefei
2026-11-19 20:14 ` Rob Herring (Arm)
0 siblings, 1 reply; 2+ messages in thread
From: Hefei @ 2026-11-19 2:48 UTC (permalink / raw)
To: dri-devel; +Cc: linux-input, devicetree, linux-kernel
Add the device tree binding for the VIEWE 7KF82 720x1280 Jadard
JD9365TX MIPI-DSI panel.
Signed-off-by: Hefei <3066883572@qq.com>
---
.../display/panel/viewe,jd9365tx.yaml | 76 +++++++++++++++++++
1 file changed, 76 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/viewe,jd9365tx.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/viewe,jd9365tx.yaml b/Documentation/devicetree/bindings/display/panel/viewe,jd9365tx.yaml
new file mode 100644
index 0000000..b15d6db
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/viewe,jd9365tx.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/viewe,jd9365tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VIEWE 7.0" 720x1280 Jadard JD9365TX MIPI-DSI in-cell panel
+
+maintainers:
+ - Hefei <3066883572@qq.com>
+
+description: |
+ The VIEWE 7KF82 module is a 720x1280 RGB888 video-mode MIPI-DSI panel
+ based on Jadard JD9365TX. It uses two DSI data lanes and exposes in-cell
+ touch over I2C on the same FPC.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: viewe,7kf82
+
+ reg:
+ maxItems: 1
+
+ vdd-supply:
+ description: Panel VDD supply, usually 3.3V
+
+ iovcc-supply:
+ description: Panel IO voltage supply, usually 3.3V
+
+ vccio-supply:
+ description: Alternate name for iovcc-supply
+
+ reset-gpios:
+ description: Optional panel reset GPIO (omit if board uses POR only).
+ maxItems: 1
+
+ backlight: true
+ rotation: true
+ port: true
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+
+anyOf:
+ - required: [iovcc-supply]
+ - required: [vccio-supply]
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "viewe,7kf82";
+ reg = <0>;
+ vdd-supply = <®_vdd>;
+ iovcc-supply = <®_iovcc>;
+ backlight = <&viewe_bl>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&dsi_out>;
+ data-lanes = <0 1>;
+ };
+ };
+ };
+ };
+...
--
2.55.0.windows.5
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH 1/6] dt-bindings: display: add VIEWE JD9365TX panel binding
2026-11-19 2:48 [PATCH 1/6] dt-bindings: display: add VIEWE JD9365TX panel binding Hefei
@ 2026-11-19 20:14 ` Rob Herring (Arm)
0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring (Arm) @ 2026-11-19 20:14 UTC (permalink / raw)
To: Hefei; +Cc: linux-kernel, dri-devel, linux-input, devicetree
On Thu, 19 Nov 2026 10:48:01 +0800, Hefei wrote:
> Add the device tree binding for the VIEWE 7KF82 720x1280 Jadard
> JD9365TX MIPI-DSI panel.
>
> Signed-off-by: Hefei <3066883572@qq.com>
> ---
> .../display/panel/viewe,jd9365tx.yaml | 76 +++++++++++++++++++
> 1 file changed, 76 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/viewe,jd9365tx.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/panel/viewe,jd9365tx.example.dtb: panel@0 (viewe,7kf82): port:endpoint: Unevaluated properties are not allowed ('data-lanes' was unexpected)
from schema $id: http://devicetree.org/schemas/display/panel/viewe,jd9365tx.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.kernel.org/project/devicetree/patch/tencent_C97CF8588D7C3312CE3D51FCDEA1E68DA70A@qq.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-19 20:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-19 2:48 [PATCH 1/6] dt-bindings: display: add VIEWE JD9365TX panel binding Hefei
2026-11-19 20:14 ` Rob Herring (Arm)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®