From: Kyuwon Cho <kyuwoncho18@gmail.com>
To: netdev@vger.kernel.org
Cc: Jay Vosburgh <jv@jvosburgh.net>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Hangbin Liu <hangbin.liu@linux.dev>,
linux-kernel@vger.kernel.org
Subject: [PATCH net v3 1/2] bonding: reject a non-Ethernet 802.3ad slave even when the type matches
Date: Sun, 22 Nov 2026 23:59:09 +0900 [thread overview]
Message-ID: <179535729502.2645501.7669047222441539373@gmail.com> (raw)
In-Reply-To: <179535729502.2645501.5219010464870440@gmail.com>
Commit c84fcb79e5db ("bonding: limit BOND_MODE_8023AD to Ethernet
devices") rejects a non-Ethernet first slave in 802.3ad mode, but only
when enslaving it changes the bond's type. A bond keeps the type of its
last slave after that slave is released, so a bond that once had an
ARPHRD_TUNNEL6 slave can be set to 802.3ad and take another TUNNEL6
device, such as a second bond prepared the same way, without the check.
bond_open() then adds the 8-byte lacpdu_mcast_addr to that slave with
dev_mc_add(), which copies the slave's 16-byte addr_len:
BUG: KASAN: global-out-of-bounds in __hw_addr_add_ex (net/core/dev_addr_lists.c:102 net/core/dev_addr_lists.c:157)
Read of size 16 at addr ffffffff878a2940 by task test/114
Call Trace:
<TASK>
__hw_addr_add_ex (net/core/dev_addr_lists.c:102 net/core/dev_addr_lists.c:157)
dev_mc_add (net/core/dev_addr_lists.c:1036 net/core/dev_addr_lists.c:1054)
bond_open (drivers/net/bonding/bond_main.c:4405)
__dev_open (net/core/dev.c:1762)
__dev_change_flags (net/core/dev.c:10022)
netif_change_flags (net/core/dev.c:10087)
do_setlink.isra.0 (net/core/rtnetlink.c:3294)
rtnl_setlink (net/core/rtnetlink.c:3633)
An unprivileged user can set this up in its own user and network
namespace.
Check that an 802.3ad slave is an Ethernet device before the type
handling, for every slave.
Fixes: c84fcb79e5db ("bonding: limit BOND_MODE_8023AD to Ethernet devices")
Suggested-by: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Kyuwon Cho <kyuwoncho18@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@kernel.org>
---
drivers/net/bonding/bond_main.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 042d7c75548f..bcc12ef34d9a 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1951,6 +1951,13 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
return -EPERM;
}
+ if (slave_dev->type != ARPHRD_ETHER &&
+ BOND_MODE(bond) == BOND_MODE_8023AD) {
+ SLAVE_NL_ERR(bond_dev, slave_dev, extack,
+ "8023AD mode requires Ethernet devices");
+ return -EINVAL;
+ }
+
/* set bonding device ether type by slave - bonding netdevices are
* created with ether_setup, so when the slave type is not ARPHRD_ETHER
* there is a need to override some of the type dependent attribs/funcs.
@@ -1960,12 +1967,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
*/
if (!bond_has_slaves(bond)) {
if (bond_dev->type != slave_dev->type) {
- if (slave_dev->type != ARPHRD_ETHER &&
- BOND_MODE(bond) == BOND_MODE_8023AD) {
- SLAVE_NL_ERR(bond_dev, slave_dev, extack,
- "8023AD mode requires Ethernet devices");
- return -EINVAL;
- }
slave_dbg(bond_dev, slave_dev, "change device type from %d to %d\n",
bond_dev->type, slave_dev->type);
--
2.43.0
next prev parent reply other threads:[~2026-11-22 14:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 14:59 [PATCH net v3 0/2] bonding: keep non-Ethernet slaves out of 802.3ad bonds Kyuwon Cho
2026-11-22 14:59 ` Kyuwon Cho [this message]
2026-11-22 14:59 ` [PATCH net v3 2/2] bonding: don't let an 802.3ad slave change its type Kyuwon Cho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=179535729502.2645501.7669047222441539373@gmail.com \
--to=kyuwoncho18@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=hangbin.liu@linux.dev \
--cc=jv@jvosburgh.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®