* [PATCH] drm/sun4i: Use vi plane as primary @ 2019-09-19 12:37 roman.stratiienko 2019-09-19 17:17 ` Maxime Ripard 0 siblings, 1 reply; 8+ messages in thread From: roman.stratiienko @ 2019-09-19 12:37 UTC (permalink / raw) To: linux-kernel, mripard, dri-devel; +Cc: Roman Stratiienko From: Roman Stratiienko <roman.stratiienko@globallogic.com> DE2.0 blender does not take into the account alpha channel of vi layer. Thus makes overlaying of this layer totally opaque. Using vi layer as bottom solves this issue. Tested on Android. Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> --- drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 33 ----------------------- drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 36 +++++++++++++++++++++++++- 2 files changed, 35 insertions(+), 34 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c index dd2a1c851939..25183badc85f 100644 --- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c +++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c @@ -99,36 +99,6 @@ static int sun8i_ui_layer_update_coord(struct sun8i_mixer *mixer, int channel, insize = SUN8I_MIXER_SIZE(src_w, src_h); outsize = SUN8I_MIXER_SIZE(dst_w, dst_h); - if (plane->type == DRM_PLANE_TYPE_PRIMARY) { - bool interlaced = false; - u32 val; - - DRM_DEBUG_DRIVER("Primary layer, updating global size W: %u H: %u\n", - dst_w, dst_h); - regmap_write(mixer->engine.regs, - SUN8I_MIXER_GLOBAL_SIZE, - outsize); - regmap_write(mixer->engine.regs, - SUN8I_MIXER_BLEND_OUTSIZE(bld_base), outsize); - - if (state->crtc) - interlaced = state->crtc->state->adjusted_mode.flags - & DRM_MODE_FLAG_INTERLACE; - - if (interlaced) - val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED; - else - val = 0; - - regmap_update_bits(mixer->engine.regs, - SUN8I_MIXER_BLEND_OUTCTL(bld_base), - SUN8I_MIXER_BLEND_OUTCTL_INTERLACED, - val); - - DRM_DEBUG_DRIVER("Switching display mixer interlaced mode %s\n", - interlaced ? "on" : "off"); - } - /* Set height and width */ DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n", state->src.x1 >> 16, state->src.y1 >> 16); @@ -349,9 +319,6 @@ struct sun8i_ui_layer *sun8i_ui_layer_init_one(struct drm_device *drm, if (!layer) return ERR_PTR(-ENOMEM); - if (index == 0) - type = DRM_PLANE_TYPE_PRIMARY; - /* possible crtcs are set later */ ret = drm_universal_plane_init(drm, &layer->plane, 0, &sun8i_ui_layer_funcs, diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c index 07c27e6a4b77..49c4074e164f 100644 --- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c +++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c @@ -116,6 +116,36 @@ static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int channel, insize = SUN8I_MIXER_SIZE(src_w, src_h); outsize = SUN8I_MIXER_SIZE(dst_w, dst_h); + if (plane->type == DRM_PLANE_TYPE_PRIMARY) { + bool interlaced = false; + u32 val; + + DRM_DEBUG_DRIVER("Primary layer, updating global size W: %u H: %u\n", + dst_w, dst_h); + regmap_write(mixer->engine.regs, + SUN8I_MIXER_GLOBAL_SIZE, + outsize); + regmap_write(mixer->engine.regs, + SUN8I_MIXER_BLEND_OUTSIZE(bld_base), outsize); + + if (state->crtc) + interlaced = state->crtc->state->adjusted_mode.flags + & DRM_MODE_FLAG_INTERLACE; + + if (interlaced) + val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED; + else + val = 0; + + regmap_update_bits(mixer->engine.regs, + SUN8I_MIXER_BLEND_OUTCTL(bld_base), + SUN8I_MIXER_BLEND_OUTCTL_INTERLACED, + val); + + DRM_DEBUG_DRIVER("Switching display mixer interlaced mode %s\n", + interlaced ? "on" : "off"); + } + /* Set height and width */ DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n", (state->src.x1 >> 16) & ~(format->hsub - 1), @@ -445,6 +475,7 @@ struct sun8i_vi_layer *sun8i_vi_layer_init_one(struct drm_device *drm, struct sun8i_mixer *mixer, int index) { + enum drm_plane_type type = DRM_PLANE_TYPE_OVERLAY; struct sun8i_vi_layer *layer; unsigned int plane_cnt; int ret; @@ -453,12 +484,15 @@ struct sun8i_vi_layer *sun8i_vi_layer_init_one(struct drm_device *drm, if (!layer) return ERR_PTR(-ENOMEM); + if (index == 0) + type = DRM_PLANE_TYPE_PRIMARY; + /* possible crtcs are set later */ ret = drm_universal_plane_init(drm, &layer->plane, 0, &sun8i_vi_layer_funcs, sun8i_vi_layer_formats, ARRAY_SIZE(sun8i_vi_layer_formats), - NULL, DRM_PLANE_TYPE_OVERLAY, NULL); + NULL, type, NULL); if (ret) { dev_err(drm->dev, "Couldn't initialize layer\n"); return ERR_PTR(ret); -- 2.17.1 ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/sun4i: Use vi plane as primary 2019-09-19 12:37 [PATCH] drm/sun4i: Use vi plane as primary roman.stratiienko @ 2019-09-19 17:17 ` Maxime Ripard 2019-09-19 18:15 ` Jernej Škrabec 0 siblings, 1 reply; 8+ messages in thread From: Maxime Ripard @ 2019-09-19 17:17 UTC (permalink / raw) To: roman.stratiienko, Jernej Skrabec; +Cc: linux-kernel, dri-devel [-- Attachment #1: Type: text/plain, Size: 4951 bytes --] Hi, On Thu, Sep 19, 2019 at 03:37:03PM +0300, roman.stratiienko@globallogic.com wrote: > From: Roman Stratiienko <roman.stratiienko@globallogic.com> > > DE2.0 blender does not take into the account alpha channel of vi layer. > Thus makes overlaying of this layer totally opaque. > Using vi layer as bottom solves this issue. > > Tested on Android. > > Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> It sounds like a workaround more than an actual fix. If the VI planes can't use the alpha, then we should just stop reporting that format. Jernej, what do you think? Maxime > --- > drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 33 ----------------------- > drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 36 +++++++++++++++++++++++++- > 2 files changed, 35 insertions(+), 34 deletions(-) > > diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c > index dd2a1c851939..25183badc85f 100644 > --- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c > +++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c > @@ -99,36 +99,6 @@ static int sun8i_ui_layer_update_coord(struct sun8i_mixer *mixer, int channel, > insize = SUN8I_MIXER_SIZE(src_w, src_h); > outsize = SUN8I_MIXER_SIZE(dst_w, dst_h); > > - if (plane->type == DRM_PLANE_TYPE_PRIMARY) { > - bool interlaced = false; > - u32 val; > - > - DRM_DEBUG_DRIVER("Primary layer, updating global size W: %u H: %u\n", > - dst_w, dst_h); > - regmap_write(mixer->engine.regs, > - SUN8I_MIXER_GLOBAL_SIZE, > - outsize); > - regmap_write(mixer->engine.regs, > - SUN8I_MIXER_BLEND_OUTSIZE(bld_base), outsize); > - > - if (state->crtc) > - interlaced = state->crtc->state->adjusted_mode.flags > - & DRM_MODE_FLAG_INTERLACE; > - > - if (interlaced) > - val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED; > - else > - val = 0; > - > - regmap_update_bits(mixer->engine.regs, > - SUN8I_MIXER_BLEND_OUTCTL(bld_base), > - SUN8I_MIXER_BLEND_OUTCTL_INTERLACED, > - val); > - > - DRM_DEBUG_DRIVER("Switching display mixer interlaced mode %s\n", > - interlaced ? "on" : "off"); > - } > - > /* Set height and width */ > DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n", > state->src.x1 >> 16, state->src.y1 >> 16); > @@ -349,9 +319,6 @@ struct sun8i_ui_layer *sun8i_ui_layer_init_one(struct drm_device *drm, > if (!layer) > return ERR_PTR(-ENOMEM); > > - if (index == 0) > - type = DRM_PLANE_TYPE_PRIMARY; > - > /* possible crtcs are set later */ > ret = drm_universal_plane_init(drm, &layer->plane, 0, > &sun8i_ui_layer_funcs, > diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c > index 07c27e6a4b77..49c4074e164f 100644 > --- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c > +++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c > @@ -116,6 +116,36 @@ static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int channel, > insize = SUN8I_MIXER_SIZE(src_w, src_h); > outsize = SUN8I_MIXER_SIZE(dst_w, dst_h); > > + if (plane->type == DRM_PLANE_TYPE_PRIMARY) { > + bool interlaced = false; > + u32 val; > + > + DRM_DEBUG_DRIVER("Primary layer, updating global size W: %u H: %u\n", > + dst_w, dst_h); > + regmap_write(mixer->engine.regs, > + SUN8I_MIXER_GLOBAL_SIZE, > + outsize); > + regmap_write(mixer->engine.regs, > + SUN8I_MIXER_BLEND_OUTSIZE(bld_base), outsize); > + > + if (state->crtc) > + interlaced = state->crtc->state->adjusted_mode.flags > + & DRM_MODE_FLAG_INTERLACE; > + > + if (interlaced) > + val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED; > + else > + val = 0; > + > + regmap_update_bits(mixer->engine.regs, > + SUN8I_MIXER_BLEND_OUTCTL(bld_base), > + SUN8I_MIXER_BLEND_OUTCTL_INTERLACED, > + val); > + > + DRM_DEBUG_DRIVER("Switching display mixer interlaced mode %s\n", > + interlaced ? "on" : "off"); > + } > + > /* Set height and width */ > DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n", > (state->src.x1 >> 16) & ~(format->hsub - 1), > @@ -445,6 +475,7 @@ struct sun8i_vi_layer *sun8i_vi_layer_init_one(struct drm_device *drm, > struct sun8i_mixer *mixer, > int index) > { > + enum drm_plane_type type = DRM_PLANE_TYPE_OVERLAY; > struct sun8i_vi_layer *layer; > unsigned int plane_cnt; > int ret; > @@ -453,12 +484,15 @@ struct sun8i_vi_layer *sun8i_vi_layer_init_one(struct drm_device *drm, > if (!layer) > return ERR_PTR(-ENOMEM); > > + if (index == 0) > + type = DRM_PLANE_TYPE_PRIMARY; > + > /* possible crtcs are set later */ > ret = drm_universal_plane_init(drm, &layer->plane, 0, > &sun8i_vi_layer_funcs, > sun8i_vi_layer_formats, > ARRAY_SIZE(sun8i_vi_layer_formats), > - NULL, DRM_PLANE_TYPE_OVERLAY, NULL); > + NULL, type, NULL); > if (ret) { > dev_err(drm->dev, "Couldn't initialize layer\n"); > return ERR_PTR(ret); > -- > 2.17.1 > [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/sun4i: Use vi plane as primary 2019-09-19 17:17 ` Maxime Ripard @ 2019-09-19 18:15 ` Jernej Škrabec [not found] ` <CAODwZ7sPG+_YvnLBU11uYaNpDFthLOkcYXsd=ZQtM+88+cPi9A@mail.gmail.com> ` (2 more replies) 0 siblings, 3 replies; 8+ messages in thread From: Jernej Škrabec @ 2019-09-19 18:15 UTC (permalink / raw) To: Maxime Ripard; +Cc: roman.stratiienko, linux-kernel, dri-devel Dne četrtek, 19. september 2019 ob 19:17:54 CEST je Maxime Ripard napisal(a): > Hi, > > On Thu, Sep 19, 2019 at 03:37:03PM +0300, roman.stratiienko@globallogic.com wrote: > > From: Roman Stratiienko <roman.stratiienko@globallogic.com> > > > > DE2.0 blender does not take into the account alpha channel of vi layer. > > Thus makes overlaying of this layer totally opaque. > > Using vi layer as bottom solves this issue. What issue? Overlays don't have to be "full screen", thus missing support for alpha blending doesn't make it less valuable. And VI planes are already placed at the bottom (zpos = 0). > > > > Tested on Android. > > > > Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> > > It sounds like a workaround more than an actual fix. > > If the VI planes can't use the alpha, then we should just stop > reporting that format. > > Jernej, what do you think? Commit message is misleading. What this commit actually does is moving primary plane from first UI plane to bottom most plane, i.e. first VI plane. However, VI planes are scarce resource, almost all mixers have only one. I wouldn't set it as primary, because it's the only one which provide support for YUV formats. That could be used for example by video player for zero-copy rendering. Probably most apps wouldn't touch it if it was primary (that's usually reserved for window manager, if used). I left few formats with alpha channel exposed by VI planes, just because they don't have equivalent format without alpha. But I'm fine with removing them if you all agree on that. Best regards, Jernej > > Maxime > > > --- > > > > drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 33 ----------------------- > > drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 36 +++++++++++++++++++++++++- > > 2 files changed, 35 insertions(+), 34 deletions(-) > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c > > b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c index dd2a1c851939..25183badc85f > > 100644 > > --- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c > > +++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c > > @@ -99,36 +99,6 @@ static int sun8i_ui_layer_update_coord(struct > > sun8i_mixer *mixer, int channel,> > > insize = SUN8I_MIXER_SIZE(src_w, src_h); > > outsize = SUN8I_MIXER_SIZE(dst_w, dst_h); > > > > - if (plane->type == DRM_PLANE_TYPE_PRIMARY) { > > - bool interlaced = false; > > - u32 val; > > - > > - DRM_DEBUG_DRIVER("Primary layer, updating global size W: %u H: %u\n", > > - dst_w, dst_h); > > - regmap_write(mixer->engine.regs, > > - SUN8I_MIXER_GLOBAL_SIZE, > > - outsize); > > - regmap_write(mixer->engine.regs, > > - SUN8I_MIXER_BLEND_OUTSIZE(bld_base), outsize); > > - > > - if (state->crtc) > > - interlaced = state->crtc->state- >adjusted_mode.flags > > - & DRM_MODE_FLAG_INTERLACE; > > - > > - if (interlaced) > > - val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED; > > - else > > - val = 0; > > - > > - regmap_update_bits(mixer->engine.regs, > > - SUN8I_MIXER_BLEND_OUTCTL(bld_base), > > - SUN8I_MIXER_BLEND_OUTCTL_INTERLACED, > > - val); > > - > > - DRM_DEBUG_DRIVER("Switching display mixer interlaced mode %s\n", > > - interlaced ? "on" : "off"); > > - } > > - > > > > /* Set height and width */ > > DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n", > > > > state->src.x1 >> 16, state->src.y1 >> 16); > > > > @@ -349,9 +319,6 @@ struct sun8i_ui_layer *sun8i_ui_layer_init_one(struct > > drm_device *drm,> > > if (!layer) > > > > return ERR_PTR(-ENOMEM); > > > > - if (index == 0) > > - type = DRM_PLANE_TYPE_PRIMARY; > > - > > > > /* possible crtcs are set later */ > > ret = drm_universal_plane_init(drm, &layer->plane, 0, > > > > &sun8i_ui_layer_funcs, > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c > > b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c index 07c27e6a4b77..49c4074e164f > > 100644 > > --- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c > > +++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c > > @@ -116,6 +116,36 @@ static int sun8i_vi_layer_update_coord(struct > > sun8i_mixer *mixer, int channel,> > > insize = SUN8I_MIXER_SIZE(src_w, src_h); > > outsize = SUN8I_MIXER_SIZE(dst_w, dst_h); > > > > + if (plane->type == DRM_PLANE_TYPE_PRIMARY) { > > + bool interlaced = false; > > + u32 val; > > + > > + DRM_DEBUG_DRIVER("Primary layer, updating global size W: %u H: %u\n", > > + dst_w, dst_h); > > + regmap_write(mixer->engine.regs, > > + SUN8I_MIXER_GLOBAL_SIZE, > > + outsize); > > + regmap_write(mixer->engine.regs, > > + SUN8I_MIXER_BLEND_OUTSIZE(bld_base), outsize); > > + > > + if (state->crtc) > > + interlaced = state->crtc->state- >adjusted_mode.flags > > + & DRM_MODE_FLAG_INTERLACE; > > + > > + if (interlaced) > > + val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED; > > + else > > + val = 0; > > + > > + regmap_update_bits(mixer->engine.regs, > > + SUN8I_MIXER_BLEND_OUTCTL(bld_base), > > + SUN8I_MIXER_BLEND_OUTCTL_INTERLACED, > > + val); > > + > > + DRM_DEBUG_DRIVER("Switching display mixer interlaced mode %s\n", > > + interlaced ? "on" : "off"); > > + } > > + > > > > /* Set height and width */ > > DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n", > > > > (state->src.x1 >> 16) & ~(format->hsub - 1), > > > > @@ -445,6 +475,7 @@ struct sun8i_vi_layer *sun8i_vi_layer_init_one(struct > > drm_device *drm,> > > struct sun8i_mixer *mixer, > > int index) > > > > { > > > > + enum drm_plane_type type = DRM_PLANE_TYPE_OVERLAY; > > > > struct sun8i_vi_layer *layer; > > unsigned int plane_cnt; > > int ret; > > > > @@ -453,12 +484,15 @@ struct sun8i_vi_layer > > *sun8i_vi_layer_init_one(struct drm_device *drm,> > > if (!layer) > > > > return ERR_PTR(-ENOMEM); > > > > + if (index == 0) > > + type = DRM_PLANE_TYPE_PRIMARY; > > + > > > > /* possible crtcs are set later */ > > ret = drm_universal_plane_init(drm, &layer->plane, 0, > > > > &sun8i_vi_layer_funcs, > > sun8i_vi_layer_formats, > > ARRAY_SIZE(sun8i_vi_layer_formats), > > > > - NULL, DRM_PLANE_TYPE_OVERLAY, NULL); > > + NULL, type, NULL); > > > > if (ret) { > > > > dev_err(drm->dev, "Couldn't initialize layer\n"); > > return ERR_PTR(ret); > > > > -- > > 2.17.1 ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <CAODwZ7sPG+_YvnLBU11uYaNpDFthLOkcYXsd=ZQtM+88+cPi9A@mail.gmail.com>]
* Re: [PATCH] drm/sun4i: Use vi plane as primary [not found] ` <CAODwZ7sPG+_YvnLBU11uYaNpDFthLOkcYXsd=ZQtM+88+cPi9A@mail.gmail.com> @ 2019-09-19 21:09 ` Jernej Škrabec 2019-09-20 6:18 ` Maxime Ripard 1 sibling, 0 replies; 8+ messages in thread From: Jernej Škrabec @ 2019-09-19 21:09 UTC (permalink / raw) To: Roman Stratiienko; +Cc: mripard, linux-kernel, dri-devel Dne četrtek, 19. september 2019 ob 22:03:26 CEST je Roman Stratiienko napisal(a): > Hello guys, > > Actually, I beleive this is True solution, and current one is wrong. Let > me explain why. > > De2. 0 was designed to match Android hwcomposer hal requirements IMO. > You can easily agree with this conclusion by comparing Composer HAL and > De2. 0 hardware manuals. > > I faced at least 4 issues when try to run Android using the mainline kernel > sun8i mixer implementation. Current one, missing pixel formats (my previous > patch), missing plane alpha and rotation properties. I plan to fix it and > also send appropriate solution to the upstream. Android and mainline Linux don't have necessarily same view how things should work. Check how different Android version of Linux kernel was in the past. Fortunately, they are converging now. While I agree that HW was probably designed with Android in mind, that doesn't mean that Android way is the best or only way of doing things. Android can afford a lot of non-intuitive things because it's closed system and all IP cores are used only in certain ways. You can't say that for general Linux distro. Would you say that advertising formats with alpha support is correct thing to do if alpha blending is not supported? Put aside the fact that it makes it easier to implement Android features for you and imagine some app which finds first available overlay plane with ARGB8888 support. It puts it on top with zpos property and gives it some transparent image. If that plane is VI, it would look wrong and users would complain. At the end, it's not apps fault to expect that if plane advertises format with alpha channel actually supports transparency. Regarding rotation, that core is not part of display pipeline. It takes one buffer and writes transformed (rotated in this case) image to output buffer. This principle is very definition of V4L2 M2M framework and should be handled by it. > > To achieve optimal UI performance Android requires at least 4 ui layers to > make screen composition. Current patch enables 4th plane usable. Ah, your idea is to pretend that VI planes supports all features of UI planes while in fact they not? > > As for using vi plane to display video. I assume that some of current users > may have regression in their software, but it could be easily fixed. For > example if vi layer isn't fullscreen and should be on top of the other > layers, it can actually be placed on the bottom and overlayed with pictures > with transparent rectangles in video region. This idea is imposible to implement if VI plane becomes primary plane. Apps wouldn't find overlay plane which suports YUV buffers and only one which does, it's already taken by window manager for rendering windows. Best regards, Jernej > But I assume most of users such as browser etc. uses GPU for that. > > And if you are watching fullscreen video, I can imagine only subtitles > layer and advertizing layers on top of the video layers. > > чт, 19 сент. 2019 г., 21:15 Jernej Škrabec <jernej.skrabec@siol.net>: > > Dne četrtek, 19. september 2019 ob 19:17:54 CEST je Maxime Ripard > > > > napisal(a): > > > Hi, > > > > > > On Thu, Sep 19, 2019 at 03:37:03PM +0300, > > > > roman.stratiienko@globallogic.com > > > > wrote: > > > > From: Roman Stratiienko <roman.stratiienko@globallogic.com> > > > > > > > > DE2.0 blender does not take into the account alpha channel of vi > > > > layer. > > > > Thus makes overlaying of this layer totally opaque. > > > > Using vi layer as bottom solves this issue. > > > > What issue? Overlays don't have to be "full screen", thus missing support > > for > > alpha blending doesn't make it less valuable. And VI planes are already > > placed > > at the bottom (zpos = 0). > > > > > > Tested on Android. > > > > > > > > Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> > > > > > > It sounds like a workaround more than an actual fix. > > > > > > If the VI planes can't use the alpha, then we should just stop > > > reporting that format. > > > > > > Jernej, what do you think? > > > > Commit message is misleading. What this commit actually does is moving > > primary > > plane from first UI plane to bottom most plane, i.e. first VI plane. > > However, VI > > planes are scarce resource, almost all mixers have only one. I wouldn't > > set it > > as primary, because it's the only one which provide support for YUV > > formats. > > That could be used for example by video player for zero-copy rendering. > > Probably most apps wouldn't touch it if it was primary (that's usually > > reserved for window manager, if used). > > > > I left few formats with alpha channel exposed by VI planes, just because > > they > > don't have equivalent format without alpha. But I'm fine with removing > > them if > > you all agree on that. > > > > Best regards, > > Jernej > > > > > Maxime > > > > > > > --- > > > > > > > > drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 33 ----------------------- > > > > drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 36 > > > > +++++++++++++++++++++++++- > > > > 2 files changed, 35 insertions(+), 34 deletions(-) > > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c > > > > b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c index > > > > dd2a1c851939..25183badc85f > > > > > > 100644 > > > > --- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c > > > > +++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c > > > > @@ -99,36 +99,6 @@ static int sun8i_ui_layer_update_coord(struct > > > > sun8i_mixer *mixer, int channel,> > > > > > > > > insize = SUN8I_MIXER_SIZE(src_w, src_h); > > > > outsize = SUN8I_MIXER_SIZE(dst_w, dst_h); > > > > > > > > - if (plane->type == DRM_PLANE_TYPE_PRIMARY) { > > > > - bool interlaced = false; > > > > - u32 val; > > > > - > > > > - DRM_DEBUG_DRIVER("Primary layer, updating global size > > > > W: %u H: %u\n", > > > > > > - dst_w, dst_h); > > > > - regmap_write(mixer->engine.regs, > > > > - SUN8I_MIXER_GLOBAL_SIZE, > > > > - outsize); > > > > - regmap_write(mixer->engine.regs, > > > > - SUN8I_MIXER_BLEND_OUTSIZE(bld_base), > > > > outsize); > > > > > > - > > > > - if (state->crtc) > > > > - interlaced = state->crtc->state- > > > > > >adjusted_mode.flags > > > > > > > - & DRM_MODE_FLAG_INTERLACE; > > > > - > > > > - if (interlaced) > > > > - val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED; > > > > - else > > > > - val = 0; > > > > - > > > > - regmap_update_bits(mixer->engine.regs, > > > > - > > > > SUN8I_MIXER_BLEND_OUTCTL(bld_base), > > > > > > - > > > > SUN8I_MIXER_BLEND_OUTCTL_INTERLACED, > > > > > > - val); > > > > - > > > > - DRM_DEBUG_DRIVER("Switching display mixer interlaced > > > > mode %s\n", > > > > > > - interlaced ? "on" : "off"); > > > > - } > > > > - > > > > > > > > /* Set height and width */ > > > > DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n", > > > > > > > > state->src.x1 >> 16, state->src.y1 >> 16); > > > > > > > > @@ -349,9 +319,6 @@ struct sun8i_ui_layer > > > > *sun8i_ui_layer_init_one(struct > > > > > > drm_device *drm,> > > > > > > > > if (!layer) > > > > > > > > return ERR_PTR(-ENOMEM); > > > > > > > > - if (index == 0) > > > > - type = DRM_PLANE_TYPE_PRIMARY; > > > > - > > > > > > > > /* possible crtcs are set later */ > > > > ret = drm_universal_plane_init(drm, &layer->plane, 0, > > > > > > > > &sun8i_ui_layer_funcs, > > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c > > > > b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c index > > > > 07c27e6a4b77..49c4074e164f > > > > > > 100644 > > > > --- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c > > > > +++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c > > > > @@ -116,6 +116,36 @@ static int sun8i_vi_layer_update_coord(struct > > > > sun8i_mixer *mixer, int channel,> > > > > > > > > insize = SUN8I_MIXER_SIZE(src_w, src_h); > > > > outsize = SUN8I_MIXER_SIZE(dst_w, dst_h); > > > > > > > > + if (plane->type == DRM_PLANE_TYPE_PRIMARY) { > > > > + bool interlaced = false; > > > > + u32 val; > > > > + > > > > + DRM_DEBUG_DRIVER("Primary layer, updating global size > > > > W: %u H: %u\n", > > > > > > + dst_w, dst_h); > > > > + regmap_write(mixer->engine.regs, > > > > + SUN8I_MIXER_GLOBAL_SIZE, > > > > + outsize); > > > > + regmap_write(mixer->engine.regs, > > > > + SUN8I_MIXER_BLEND_OUTSIZE(bld_base), > > > > outsize); > > > > > > + > > > > + if (state->crtc) > > > > + interlaced = state->crtc->state- > > > > > >adjusted_mode.flags > > > > > > > + & DRM_MODE_FLAG_INTERLACE; > > > > + > > > > + if (interlaced) > > > > + val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED; > > > > + else > > > > + val = 0; > > > > + > > > > + regmap_update_bits(mixer->engine.regs, > > > > + > > > > SUN8I_MIXER_BLEND_OUTCTL(bld_base), > > > > > > + > > > > SUN8I_MIXER_BLEND_OUTCTL_INTERLACED, > > > > > > + val); > > > > + > > > > + DRM_DEBUG_DRIVER("Switching display mixer interlaced > > > > mode %s\n", > > > > > > + interlaced ? "on" : "off"); > > > > + } > > > > + > > > > > > > > /* Set height and width */ > > > > DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n", > > > > > > > > (state->src.x1 >> 16) & ~(format->hsub - > > > > 1), > > > > > > @@ -445,6 +475,7 @@ struct sun8i_vi_layer > > > > *sun8i_vi_layer_init_one(struct > > > > > > drm_device *drm,> > > > > > > > > struct > > > > sun8i_mixer *mixer, > > > > > > int index) > > > > > > > > { > > > > > > > > + enum drm_plane_type type = DRM_PLANE_TYPE_OVERLAY; > > > > > > > > struct sun8i_vi_layer *layer; > > > > unsigned int plane_cnt; > > > > int ret; > > > > > > > > @@ -453,12 +484,15 @@ struct sun8i_vi_layer > > > > *sun8i_vi_layer_init_one(struct drm_device *drm,> > > > > > > > > if (!layer) > > > > > > > > return ERR_PTR(-ENOMEM); > > > > > > > > + if (index == 0) > > > > + type = DRM_PLANE_TYPE_PRIMARY; > > > > + > > > > > > > > /* possible crtcs are set later */ > > > > ret = drm_universal_plane_init(drm, &layer->plane, 0, > > > > > > > > &sun8i_vi_layer_funcs, > > > > sun8i_vi_layer_formats, > > > > ARRAY_SIZE(sun8i_vi_layer_formats), > > > > > > - NULL, > > > > DRM_PLANE_TYPE_OVERLAY, NULL); > > > > > > + NULL, type, NULL); > > > > > > > > if (ret) { > > > > > > > > dev_err(drm->dev, "Couldn't initialize layer\n"); > > > > return ERR_PTR(ret); > > > > > > > > -- > > > > 2.17.1 ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/sun4i: Use vi plane as primary [not found] ` <CAODwZ7sPG+_YvnLBU11uYaNpDFthLOkcYXsd=ZQtM+88+cPi9A@mail.gmail.com> 2019-09-19 21:09 ` Jernej Škrabec @ 2019-09-20 6:18 ` Maxime Ripard 2019-09-20 20:09 ` Roman Stratiienko 1 sibling, 1 reply; 8+ messages in thread From: Maxime Ripard @ 2019-09-20 6:18 UTC (permalink / raw) To: Roman Stratiienko; +Cc: Jernej Škrabec, linux-kernel, dri-devel [-- Attachment #1: Type: text/plain, Size: 1024 bytes --] Hi, On Thu, Sep 19, 2019 at 11:03:26PM +0300, Roman Stratiienko wrote: > Actually, I beleive this is True solution, and current one is wrong. Let > me explain why. > > De2. 0 was designed to match Android hwcomposer hal requirements IMO. > You can easily agree with this conclusion by comparing Composer HAL and > De2. 0 hardware manuals. > > I faced at least 4 issues when try to run Android using the mainline kernel > sun8i mixer implementation. Current one, missing pixel formats (my previous > patch), missing plane alpha and rotation properties. I plan to fix it and > also send appropriate solution to the upstream. > > To achieve optimal UI performance Android requires at least 4 ui layers to > make screen composition. Current patch enables 4th plane usable. Note that you can also get 4 UI planes by enabling more than one UI layer per channel. You wouldn't be able to use alpha between each plane of a given channel, but we can use a similar trick than what we did for the pipes in the sun4i backend. Maxime [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/sun4i: Use vi plane as primary 2019-09-20 6:18 ` Maxime Ripard @ 2019-09-20 20:09 ` Roman Stratiienko 0 siblings, 0 replies; 8+ messages in thread From: Roman Stratiienko @ 2019-09-20 20:09 UTC (permalink / raw) To: Maxime Ripard; +Cc: Jernej Škrabec, linux-kernel, dri-devel @Jernej Škrabec @Maxime Ripard Thanks for your time and valuable suggestions. Currently I would have to go away from mainline KMS to solve my (Android) issues, and I hope to get back when I find mainline-friendly solution for it. Having no primary layer or zero-buffer primary layer and 4 overlays could be a universal solution, but I have not sufficient knowledge in KMS to bring-up this idea. On Fri, Sep 20, 2019 at 9:18 AM Maxime Ripard <mripard@kernel.org> wrote: > > Hi, > > On Thu, Sep 19, 2019 at 11:03:26PM +0300, Roman Stratiienko wrote: > > Actually, I beleive this is True solution, and current one is wrong. Let > > me explain why. > > > > De2. 0 was designed to match Android hwcomposer hal requirements IMO. > > You can easily agree with this conclusion by comparing Composer HAL and > > De2. 0 hardware manuals. > > > > I faced at least 4 issues when try to run Android using the mainline kernel > > sun8i mixer implementation. Current one, missing pixel formats (my previous > > patch), missing plane alpha and rotation properties. I plan to fix it and > > also send appropriate solution to the upstream. > > > > To achieve optimal UI performance Android requires at least 4 ui layers to > > make screen composition. Current patch enables 4th plane usable. > > Note that you can also get 4 UI planes by enabling more than one UI > layer per channel. You wouldn't be able to use alpha between each > plane of a given channel, but we can use a similar trick than what we > did for the pipes in the sun4i backend. > > Maxime -- Best regards, Roman Stratiienko Global Logic Inc. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/sun4i: Use vi plane as primary 2019-09-19 18:15 ` Jernej Škrabec [not found] ` <CAODwZ7sPG+_YvnLBU11uYaNpDFthLOkcYXsd=ZQtM+88+cPi9A@mail.gmail.com> @ 2019-09-20 6:12 ` Maxime Ripard 2019-09-20 7:54 ` Roman Stratiienko 2 siblings, 0 replies; 8+ messages in thread From: Maxime Ripard @ 2019-09-20 6:12 UTC (permalink / raw) To: Jernej Škrabec; +Cc: roman.stratiienko, linux-kernel, dri-devel [-- Attachment #1: Type: text/plain, Size: 1454 bytes --] On Thu, Sep 19, 2019 at 08:15:49PM +0200, Jernej Škrabec wrote: > Dne četrtek, 19. september 2019 ob 19:17:54 CEST je Maxime Ripard napisal(a): > > > > > > Tested on Android. > > > > > > Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> > > > > It sounds like a workaround more than an actual fix. > > > > If the VI planes can't use the alpha, then we should just stop > > reporting that format. > > > > Jernej, what do you think? > > Commit message is misleading. What this commit actually does is moving primary > plane from first UI plane to bottom most plane, i.e. first VI plane. However, VI > planes are scarce resource, almost all mixers have only one. I wouldn't set it > as primary, because it's the only one which provide support for YUV formats. > That could be used for example by video player for zero-copy rendering. > Probably most apps wouldn't touch it if it was primary (that's usually > reserved for window manager, if used). Yeah, we definitely don't want to use it as primary and prevent the video display. > I left few formats with alpha channel exposed by VI planes, just because they > don't have equivalent format without alpha. But I'm fine with removing them if > you all agree on that. If there's no alpha support, then yeah, we shouldn't expose the format at all, and then we can either add the new formats, or just not expose them if they are exotic enough. Maxime [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/sun4i: Use vi plane as primary 2019-09-19 18:15 ` Jernej Škrabec [not found] ` <CAODwZ7sPG+_YvnLBU11uYaNpDFthLOkcYXsd=ZQtM+88+cPi9A@mail.gmail.com> 2019-09-20 6:12 ` Maxime Ripard @ 2019-09-20 7:54 ` Roman Stratiienko 2 siblings, 0 replies; 8+ messages in thread From: Roman Stratiienko @ 2019-09-20 7:54 UTC (permalink / raw) To: Jernej Škrabec; +Cc: Maxime Ripard, linux-kernel, dri-devel [ Resending message in plain mode ] Hello guys, Actually, I believe this is True solution, and current one is wrong. Let me explain why. De2. 0 was designed to match Android hwcomposer hal requirements IMO. You can easily agree with this conclusion by comparing Composer HAL and De2. 0 hardware manuals. I faced at least 4 issues when trying to run Android using the mainline kernel sun8i mixer implementation. Current one, missing pixel formats (my previous patch), missing plane alpha and rotation properties. I plan to fix it and also send appropriate solution to the upstream. To achieve optimal UI performance Android requires at least 4 ui layers to make screen composition. Current patch enables 4th plane usable. As for using vi plane to display video. I assume that some of the current users may have regression in their software, but it could be easily fixed. For example if vi layer isn't fullscreen and should be on top of the other layers, it can actually be placed on the bottom and overlayed with pictures with transparent rectangles in video region. But I assume most of users such as browser etc. uses GPU for that. And if you are watching fullscreen video, I can imagine only subtitles layer and advertising layers on top of the video layers. On Thu, Sep 19, 2019 at 9:15 PM Jernej Škrabec <jernej.skrabec@siol.net> wrote: > > Dne četrtek, 19. september 2019 ob 19:17:54 CEST je Maxime Ripard napisal(a): > > Hi, > > > > On Thu, Sep 19, 2019 at 03:37:03PM +0300, roman.stratiienko@globallogic.com > wrote: > > > From: Roman Stratiienko <roman.stratiienko@globallogic.com> > > > > > > DE2.0 blender does not take into the account alpha channel of vi layer. > > > Thus makes overlaying of this layer totally opaque. > > > Using vi layer as bottom solves this issue. > > What issue? Overlays don't have to be "full screen", thus missing support for > alpha blending doesn't make it less valuable. And VI planes are already placed > at the bottom (zpos = 0). > > > > > > > Tested on Android. > > > > > > Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> > > > > It sounds like a workaround more than an actual fix. > > > > If the VI planes can't use the alpha, then we should just stop > > reporting that format. > > > > Jernej, what do you think? > > Commit message is misleading. What this commit actually does is moving primary > plane from first UI plane to bottom most plane, i.e. first VI plane. However, VI > planes are scarce resource, almost all mixers have only one. I wouldn't set it > as primary, because it's the only one which provide support for YUV formats. > That could be used for example by video player for zero-copy rendering. > Probably most apps wouldn't touch it if it was primary (that's usually > reserved for window manager, if used). > > I left few formats with alpha channel exposed by VI planes, just because they > don't have equivalent format without alpha. But I'm fine with removing them if > you all agree on that. > > Best regards, > Jernej > > > > > Maxime > > > > > --- > > > > > > drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 33 ----------------------- > > > drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 36 +++++++++++++++++++++++++- > > > 2 files changed, 35 insertions(+), 34 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c > > > b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c index dd2a1c851939..25183badc85f > > > 100644 > > > --- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c > > > +++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c > > > @@ -99,36 +99,6 @@ static int sun8i_ui_layer_update_coord(struct > > > sun8i_mixer *mixer, int channel,> > > > insize = SUN8I_MIXER_SIZE(src_w, src_h); > > > outsize = SUN8I_MIXER_SIZE(dst_w, dst_h); > > > > > > - if (plane->type == DRM_PLANE_TYPE_PRIMARY) { > > > - bool interlaced = false; > > > - u32 val; > > > - > > > - DRM_DEBUG_DRIVER("Primary layer, updating global size > W: %u H: %u\n", > > > - dst_w, dst_h); > > > - regmap_write(mixer->engine.regs, > > > - SUN8I_MIXER_GLOBAL_SIZE, > > > - outsize); > > > - regmap_write(mixer->engine.regs, > > > - SUN8I_MIXER_BLEND_OUTSIZE(bld_base), > outsize); > > > - > > > - if (state->crtc) > > > - interlaced = state->crtc->state- > >adjusted_mode.flags > > > - & DRM_MODE_FLAG_INTERLACE; > > > - > > > - if (interlaced) > > > - val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED; > > > - else > > > - val = 0; > > > - > > > - regmap_update_bits(mixer->engine.regs, > > > - > SUN8I_MIXER_BLEND_OUTCTL(bld_base), > > > - > SUN8I_MIXER_BLEND_OUTCTL_INTERLACED, > > > - val); > > > - > > > - DRM_DEBUG_DRIVER("Switching display mixer interlaced > mode %s\n", > > > - interlaced ? "on" : "off"); > > > - } > > > - > > > > > > /* Set height and width */ > > > DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n", > > > > > > state->src.x1 >> 16, state->src.y1 >> 16); > > > > > > @@ -349,9 +319,6 @@ struct sun8i_ui_layer *sun8i_ui_layer_init_one(struct > > > drm_device *drm,> > > > if (!layer) > > > > > > return ERR_PTR(-ENOMEM); > > > > > > - if (index == 0) > > > - type = DRM_PLANE_TYPE_PRIMARY; > > > - > > > > > > /* possible crtcs are set later */ > > > ret = drm_universal_plane_init(drm, &layer->plane, 0, > > > > > > &sun8i_ui_layer_funcs, > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c > > > b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c index 07c27e6a4b77..49c4074e164f > > > 100644 > > > --- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c > > > +++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c > > > @@ -116,6 +116,36 @@ static int sun8i_vi_layer_update_coord(struct > > > sun8i_mixer *mixer, int channel,> > > > insize = SUN8I_MIXER_SIZE(src_w, src_h); > > > outsize = SUN8I_MIXER_SIZE(dst_w, dst_h); > > > > > > + if (plane->type == DRM_PLANE_TYPE_PRIMARY) { > > > + bool interlaced = false; > > > + u32 val; > > > + > > > + DRM_DEBUG_DRIVER("Primary layer, updating global size > W: %u H: %u\n", > > > + dst_w, dst_h); > > > + regmap_write(mixer->engine.regs, > > > + SUN8I_MIXER_GLOBAL_SIZE, > > > + outsize); > > > + regmap_write(mixer->engine.regs, > > > + SUN8I_MIXER_BLEND_OUTSIZE(bld_base), > outsize); > > > + > > > + if (state->crtc) > > > + interlaced = state->crtc->state- > >adjusted_mode.flags > > > + & DRM_MODE_FLAG_INTERLACE; > > > + > > > + if (interlaced) > > > + val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED; > > > + else > > > + val = 0; > > > + > > > + regmap_update_bits(mixer->engine.regs, > > > + > SUN8I_MIXER_BLEND_OUTCTL(bld_base), > > > + > SUN8I_MIXER_BLEND_OUTCTL_INTERLACED, > > > + val); > > > + > > > + DRM_DEBUG_DRIVER("Switching display mixer interlaced > mode %s\n", > > > + interlaced ? "on" : "off"); > > > + } > > > + > > > > > > /* Set height and width */ > > > DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n", > > > > > > (state->src.x1 >> 16) & ~(format->hsub - > 1), > > > > > > @@ -445,6 +475,7 @@ struct sun8i_vi_layer *sun8i_vi_layer_init_one(struct > > > drm_device *drm,> > > > struct > sun8i_mixer *mixer, > > > int index) > > > > > > { > > > > > > + enum drm_plane_type type = DRM_PLANE_TYPE_OVERLAY; > > > > > > struct sun8i_vi_layer *layer; > > > unsigned int plane_cnt; > > > int ret; > > > > > > @@ -453,12 +484,15 @@ struct sun8i_vi_layer > > > *sun8i_vi_layer_init_one(struct drm_device *drm,> > > > if (!layer) > > > > > > return ERR_PTR(-ENOMEM); > > > > > > + if (index == 0) > > > + type = DRM_PLANE_TYPE_PRIMARY; > > > + > > > > > > /* possible crtcs are set later */ > > > ret = drm_universal_plane_init(drm, &layer->plane, 0, > > > > > > &sun8i_vi_layer_funcs, > > > sun8i_vi_layer_formats, > > > > ARRAY_SIZE(sun8i_vi_layer_formats), > > > > > > - NULL, > DRM_PLANE_TYPE_OVERLAY, NULL); > > > + NULL, type, NULL); > > > > > > if (ret) { > > > > > > dev_err(drm->dev, "Couldn't initialize layer\n"); > > > return ERR_PTR(ret); > > > > > > -- > > > 2.17.1 > > > > -- Best regards, Roman Stratiienko Global Logic ADIT Team ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-09-20 20:09 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-19 12:37 [PATCH] drm/sun4i: Use vi plane as primary roman.stratiienko
2019-09-19 17:17 ` Maxime Ripard
2019-09-19 18:15 ` Jernej Škrabec
[not found] ` <CAODwZ7sPG+_YvnLBU11uYaNpDFthLOkcYXsd=ZQtM+88+cPi9A@mail.gmail.com>
2019-09-19 21:09 ` Jernej Škrabec
2019-09-20 6:18 ` Maxime Ripard
2019-09-20 20:09 ` Roman Stratiienko
2019-09-20 6:12 ` Maxime Ripard
2019-09-20 7:54 ` Roman Stratiienko
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®