bug in 2.6.16-mm1 - snd-ad1816a is not being loaded

bug in 2.6.16-mm1 - snd-ad1816a is not being loaded

[Uwe Bugla]

Hi folks,
I've tried Bjorn Hellgaas' patch which is included in 2.6.16-mm1. Thanks for
his attempts. But the problem still persists:
snd-ad1816a still refuses to load and dmesg still talks about a PnP
configuration error. If you need additional information, please tell me how
to produce it. 2.6.16 without mm1 works fine so far.

Ciao
Uwe
P. S.: In the first lines of dmesg the card is being recognized and the card
ID is being printed out to the console. But as soon as it goes to loading
the driver module the whole thing is broken and the module is not being
loaded, while dmesg prints out a PnP configuration error.

-- 
Bis zu 70% Ihrer Onlinekosten sparen: GMX SmartSurfer!
Kostenlos downloaden: http://www.gmx.net/de/go/smartsurfer

Re: bug in 2.6.16-mm1 - snd-ad1816a is not being loaded

[Bjorn Helgaas]

On Friday 24 March 2006 07:36, Uwe Bugla wrote:
> Hi folks,
> I've tried Bjorn Hellgaas' patch which is included in 2.6.16-mm1. Thanks for
> his attempts. But the problem still persists:
> snd-ad1816a still refuses to load and dmesg still talks about a PnP
> configuration error. If you need additional information, please tell me how
> to produce it. 2.6.16 without mm1 works fine so far.
> 
> Ciao
> Uwe
> P. S.: In the first lines of dmesg the card is being recognized and the card
> ID is being printed out to the console. But as soon as it goes to loading
> the driver module the whole thing is broken and the module is not being
> loaded, while dmesg prints out a PnP configuration error.

Could you please open a report at http://bugzilla.kernel.org and
attach the complete dmesg logs from 2.6.16 and 2.6.16-mm1?

Thanks!

Bjorn

Re: bug in 2.6.16-mm1 - snd-ad1816a is not being loaded

[Bjorn Helgaas]

On Friday 24 March 2006 07:36, Uwe Bugla wrote:
> Hi folks,
> I've tried Bjorn Hellgaas' patch which is included in 2.6.16-mm1. Thanks for
> his attempts. But the problem still persists:
> snd-ad1816a still refuses to load and dmesg still talks about a PnP
> configuration error. If you need additional information, please tell me how
> to produce it. 2.6.16 without mm1 works fine so far.
> 
> Ciao
> Uwe
> P. S.: In the first lines of dmesg the card is being recognized and the card
> ID is being printed out to the console. But as soon as it goes to loading
> the driver module the whole thing is broken and the module is not being
> loaded, while dmesg prints out a PnP configuration error.

For anybody else interested, I opened a kernel bugzilla for this,
and Uwe provided complete dmesg logs, which I attached there:

    http://bugzilla.kernel.org/show_bug.cgi?id=6292