Re: [PATCH 2/2] iio: afe: unit-converter: add support for adi,lt6106

["Andrew F. Davis" <afd@ti.com>]

On 04/11/2018 10:51 AM, Lars-Peter Clausen wrote:
> On 04/11/2018 05:43 PM, Andrew F. Davis wrote:
>> On 04/11/2018 09:15 AM, Peter Rosin wrote:
>>> This is a current sense amplifier from Analog Devices.
>>>
>>> Signed-off-by: Peter Rosin <peda@axentia.se>
>>> ---
>>>  drivers/iio/afe/Kconfig              |  3 +-
>>>  drivers/iio/afe/iio-unit-converter.c | 54 ++++++++++++++++++++++++++++++++++++
>>>  2 files changed, 56 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/iio/afe/Kconfig b/drivers/iio/afe/Kconfig
>>> index 642ce4eb12a6..0e10fe8f459a 100644
>>> --- a/drivers/iio/afe/Kconfig
>>> +++ b/drivers/iio/afe/Kconfig
>>> @@ -10,7 +10,8 @@ config IIO_UNIT_CONVERTER
>>>  	depends on OF || COMPILE_TEST
>>>  	help
>>>  	  Say yes here to build support for the IIO unit converter
>>> -	  that handles voltage dividers and current sense shunts.
>>> +	  that handles voltage dividers, current sense shunts and
>>> +	  the LT6106 Current Sense Amplifier from Analog Devices.
>>
>> Could work better to split these out into separate drivers. Maybe a
>> iio-shunt-resistor.c that does just voltage->current with the
>> appropriate scaling. Then make a a separate lt6106.c.
> 
> I don't think we need a separate driver here. There are tons of circuits
> that all work the same way and all require the same properties. If we'd add
> a driver for each of them we'd get buried in boilerplate code.
> 

Fair enough, then it should at least be renamed to something generic
like current-sense-amplifier, as you said lots of circuits do this, not
just lt6106s. We will have then have support for:

current-sense-amplifier
current-sense-shunt
voltage-divider

compatibles in this driver called "unit-converter" which is still a
misnomer IMHO.

Andrew