mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andrew Davis <afd@ti.com>
To: Aradhya Bhatia <a-bhatia1@ti.com>, Nishanth Menon <nm@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>
Cc: Devicetree List <devicetree@vger.kernel.org>,
	Linux Kernel List <linux-kernel@vger.kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
	Jyri Sarha <jyri.sarha@iki.fi>, Tomi Valkeinen <tomba@kernel.org>,
	Praneeth Bajjuri <praneeth@ti.com>,
	Rahul T R <r-ravikumar@ti.com>, Devarsh Thakkar <devarsht@ti.com>,
	Jai Luthra <j-luthra@ti.com>,
	Jayesh Choudhary <j-choudhary@ti.com>
Subject: Re: [PATCH 1/2] arm64: dts: ti: Add overlay for OLDI-LCD1EVM Display and touch screen
Date: Tue, 25 Apr 2023 12:44:54 -0500	[thread overview]
Message-ID: <19f1d3dc-a416-9d5e-f545-8ccf1a65c73c@ti.com> (raw)
In-Reply-To: <66a4c8e0-e1d1-4d7d-b0eb-ce092fea8695@ti.com>

On 4/25/23 12:00 PM, Aradhya Bhatia wrote:
> Hi Andrew,
> 
> On 25-Apr-23 20:39, Andrew Davis wrote:
>> On 4/25/23 12:12 AM, Aradhya Bhatia wrote:
>>> From: Jyri Sarha <jsarha@ti.com>
>>>
>>> The OLDI-LCD1EVM add on board has Rocktech RK101II01D-CT panel with
>>> integrated touch screen. The integrated touch screen is Goodix GT928.
>>> Add DT nodes for these and connect the endpoint nodes with DSS.
>>>
>>> This patch was picked from TI's public tree based on 5.10 LTS kernel.
>>>
>>> Signed-off-by: Jyri Sarha <jsarha@ti.com>
>>> Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
>>> [abhatia1@ti.com: Make syntax changes to support 6.1 DTSO format]
>>> Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
>>> ---
>>>    arch/arm64/boot/dts/ti/Makefile               |  2 +
>>>    .../dts/ti/k3-am654-evm-oldi-lcd1evm.dtso     | 70 +++++++++++++++++++
>>>    2 files changed, 72 insertions(+)
>>>    create mode 100644
>>> arch/arm64/boot/dts/ti/k3-am654-evm-oldi-lcd1evm.dtso
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/Makefile
>>> b/arch/arm64/boot/dts/ti/Makefile
>>> index 6acd12409d59..8956b19e587a 100644
>>> --- a/arch/arm64/boot/dts/ti/Makefile
>>> +++ b/arch/arm64/boot/dts/ti/Makefile
>>> @@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
>>>    dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
>>>    dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
>>>    dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
>>> +dtb-$(CONFIG_ARCH_K3) += k3-am654-evm-oldi-lcd1evm.dtbo
>>
>> This name is a bit odd, why "evm" twice? Looks like the first instance
>> is the redundant one as most of the documents on this LCD board call it
>> the "LCD1EVM". How about:
>>
>> k3-am654-lcd1evm.dtbo
> 
> I didn't think I could change the name of the overlay picking the patch
> from our tree, but if we are going to do it, can we take up another
> approach, where it would be easier to add panels for AM62x family and
> ensure uniformity throughout.
> 

Yes, we can change what we want when upstreaming. How we did it in our
evil vendor tree should in no way prevent us from doing things better
in upstream.

> We have 2 different panels from Vendor A, and another one from Vendor B.
> Vendor B panel connects to AM625-SK via an adapter board.
> 
> Vendor-A/Panel-1 only says the name, 'SK-LCD1' on its circuit board.
> Vendor-A/Panel-2 doesn't have any name yet. We only have development
> units.
> Vendor-B/Panel-2 mentions '$(LCD_model) to AM62x SoC adapter board'.
> 
> Since, there are too many manufacturers, it is difficult to maintain
> uniformity with the names of panel-boards. So, I have this approach in
> mind (which I have used for our tree for AM62x), but would like your
> comments.
> 
> k3-$soc-$board-$(panel_vendor)-$(brief_compatible).dtso
> 
> So, for AM625-SKs,
> k3-am625-sk-$(vendor_name)-$(brief_compatible).dtso
> 

Looks reasonable to me.

> and for the current panel Rocktech RK101II01D-CT, which applies on AM654
> base-board,
> 
> k3-am654-base-board-rocktech-rk101.dtso.
> 
> This does become rather long, but also is distinguishable.
> 

No limit to file names here, being clear and distinguishable is more
important than short names.

> Let me know what you think.
> 
>>
>> I would like the overlay names to give some hint to what base DTB they
>> apply to,
> 
> Agreed. That is indeed how it should be.
> 
>> or better yet, apply them here in the build which will check
>> that they apply cleanly. Plus you can drop the silly "+= -@" below.
>>
> 
> The above approach will give a hint of the base EVM where a combined
> build is not possible simply because there is no 'official' name for a
> particular combination of panel and EVM.
> 

We do not need to name each possible combination (and we shouldn't, there
would be a combinatorial explosion, avoiding that is the whole point
of using overlays vs .dtsi includes).

I do think we should name at least the combinations that we ship together.
So as below for AM654 that would be the GPEVM and the IDK. Those are the
two out-of-box combinations available for purchase as a kit. Folks can still
buy additional add-on cards, and/or mix and match from those two sets.

As long as we have at least one named combination, then the base-board dtb
file gets symbols automatically and we can drop the "+= -@" line.

Andrew

> 
> Regards
> Aradhya
> 
>> Let's see how this should be called, from the AM65x GP EVM doc[0] we
>> get a nice picture on page 5 and the following:
>>
>> "The AM65x GP EVM consists of a common processor board, an LCD adapter,
>> and a one-lane PCIe/USB3 personality card."
>>
>> So, this would translate to:
>>
>> k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-lcd1evm.dtbo
>> k3-am654-pcie-usb3.dtbo
>> dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb>
>> Next, from the AM65x IDK doc[1] also with a nice image on page 5:
>>
>> "The AM65x IDK consists of a common processor board, IDK application board,
>> and a two-lane PCIe personality card.:
>>
>> So:
>>
>> k3-am654-idk-dtbs := k3-am654-base-board.dtb k3-am654-idk.dtbo
>> k3-am654-pcie-usb2.dtbo
>> dtb-$(CONFIG_ARCH_K3) += k3-am654-idk.dtb
>>
>> Note that we do have all those missing dtso files in our evil vendor
>> tree[2]
>> and will be upstreaming them next, so this naming should all work out
>> nicely.
>>
>> Andrew
>>
>> [0] https://www.ti.com/lit/ug/spruim7/spruim7.pdf
>> [1] https://www.ti.com/lit/ug/spruim6a/spruim6a.pdf
>> [2]
>> https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/arch/arm64/boot/dts/ti?h=ti-linux-5.10.y
>>
>>>      # Boards with J7200 SoC
>>>    dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb
>>> @@ -45,3 +46,4 @@ dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
>>>      # Enable support for device-tree overlays
>>>    DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
>>> +DTC_FLAGS_k3-am654-base-board += -@
>>> diff --git a/arch/arm64/boot/dts/ti/k3-am654-evm-oldi-lcd1evm.dtso
>>> b/arch/arm64/boot/dts/ti/k3-am654-evm-oldi-lcd1evm.dtso
>>> new file mode 100644
>>> index 000000000000..b2c790b314cf
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/ti/k3-am654-evm-oldi-lcd1evm.dtso
>>> @@ -0,0 +1,70 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/**
>>> + * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for
>>> AM654-EVM.
>>> + *
>>> + * Copyright (C) 2023 Texas Instruments Incorporated -
>>> http://www.ti.com/
>>> + */
>>> +
>>> +/dts-v1/;
>>> +/plugin/;
>>> +
>>> +#include <dt-bindings/pwm/pwm.h>
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +
>>> +&{/} {
>>> +    display0 {
>>> +        compatible = "rocktech,rk101ii01d-ct";
>>> +        backlight = <&lcd_bl>;
>>> +        enable-gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
>>> +        port {
>>> +            lcd_in0: endpoint {
>>> +                remote-endpoint = <&oldi_out0>;
>>> +            };
>>> +        };
>>> +    };
>>> +
>>> +    lcd_bl: backlight {
>>> +        compatible = "pwm-backlight";
>>> +        pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
>>> +        brightness-levels =
>>> +            <0 32 64 96 128 160 192 224 255>;
>>> +        default-brightness-level = <8>;
>>> +    };
>>> +};
>>> +
>>> +&dss {
>>> +    status = "okay";
>>> +};
>>> +
>>> +&dss_ports {
>>> +    #address-cells = <1>;
>>> +    #size-cells = <0>;
>>> +
>>> +    port@0 {
>>> +        reg = <0>;
>>> +
>>> +        oldi_out0: endpoint {
>>> +            remote-endpoint = <&lcd_in0>;
>>> +        };
>>> +    };
>>> +};
>>> +
>>> +&main_i2c1 {
>>> +    #address-cells = <1>;
>>> +    #size-cells = <0>;
>>> +
>>> +    gt928: touchscreen@14 {
>>> +        status = "okay";
>>> +        compatible = "goodix,gt928";
>>> +        reg = <0x14>;
>>> +
>>> +        interrupt-parent = <&pca9554>;
>>> +        interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
>>> +        touchscreen-size-x = <1280>;
>>> +        touchscreen-size-y = <800>;
>>> +
>>> +        reset-gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
>>> +        irq-gpios = <&pca9554 3 GPIO_ACTIVE_HIGH>;
>>> +    };
>>> +};

  reply	other threads:[~2023-04-25 17:45 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-25  5:12 [PATCH 0/2] arm64: dts: ti: Add OLDI panel DT overlay Aradhya Bhatia
2023-04-25  5:12 ` [PATCH 1/2] arm64: dts: ti: Add overlay for OLDI-LCD1EVM Display and touch screen Aradhya Bhatia
2023-04-25  7:35   ` Tomi Valkeinen
2023-04-25 12:36   ` Nishanth Menon
2023-04-25 15:09   ` Andrew Davis
2023-04-25 17:00     ` Aradhya Bhatia
2023-04-25 17:44       ` Andrew Davis [this message]
2023-04-26  6:13         ` Aradhya Bhatia
2023-04-25  5:12 ` [PATCH 2/2] arm64: defconfig: Enable PWM drivers for TI ECAP and EHRPWM Aradhya Bhatia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=19f1d3dc-a416-9d5e-f545-8ccf1a65c73c@ti.com \
    --to=afd@ti.com \
    --cc=a-bhatia1@ti.com \
    --cc=catalin.marinas@arm.com \
    --cc=devarsht@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=j-choudhary@ti.com \
    --cc=j-luthra@ti.com \
    --cc=jyri.sarha@iki.fi \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=praneeth@ti.com \
    --cc=r-ravikumar@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=tomba@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®