Re: [PATCH 1/2] arm64: dts: ti: Add overlay for OLDI-LCD1EVM Display and touch screen

[Nishanth Menon <nm@ti.com>]

$subject could do a bit of improvement.

On 10:42-20230425, Aradhya Bhatia wrote:
> From: Jyri Sarha <jsarha@ti.com>
> 
> The OLDI-LCD1EVM add on board has Rocktech RK101II01D-CT panel with
> integrated touch screen. The integrated touch screen is Goodix GT928.
> Add DT nodes for these and connect the endpoint nodes with DSS.
> 
> This patch was picked from TI's public tree based on 5.10 LTS kernel.

Please drop this.

> 
> Signed-off-by: Jyri Sarha <jsarha@ti.com>
> Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
> [abhatia1@ti.com: Make syntax changes to support 6.1 DTSO format]
> Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
> ---
>  arch/arm64/boot/dts/ti/Makefile               |  2 +
>  .../dts/ti/k3-am654-evm-oldi-lcd1evm.dtso     | 70 +++++++++++++++++++
>  2 files changed, 72 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am654-evm-oldi-lcd1evm.dtso
> 
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index 6acd12409d59..8956b19e587a 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-am654-evm-oldi-lcd1evm.dtbo
>  
>  # Boards with J7200 SoC
>  dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb
> @@ -45,3 +46,4 @@ dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
>  
>  # Enable support for device-tree overlays
>  DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
> +DTC_FLAGS_k3-am654-base-board += -@
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-evm-oldi-lcd1evm.dtso b/arch/arm64/boot/dts/ti/k3-am654-evm-oldi-lcd1evm.dtso
> new file mode 100644
> index 000000000000..b2c790b314cf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am654-evm-oldi-lcd1evm.dtso
> @@ -0,0 +1,70 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for AM654-EVM.

Product link?

> + *
> + * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/pwm/pwm.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +&{/} {
> +	display0 {
> +		compatible = "rocktech,rk101ii01d-ct";
> +		backlight = <&lcd_bl>;
> +		enable-gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
> +		port {
> +			lcd_in0: endpoint {
> +				remote-endpoint = <&oldi_out0>;
> +			};
> +		};
> +	};
> +
> +	lcd_bl: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
> +		brightness-levels =
> +			<0 32 64 96 128 160 192 224 255>;
> +		default-brightness-level = <8>;
> +	};
> +};
> +
> +&dss {
> +	status = "okay";
> +};
> +
> +&dss_ports {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	port@0 {
> +		reg = <0>;
> +
> +		oldi_out0: endpoint {
> +			remote-endpoint = <&lcd_in0>;
> +		};
> +	};
> +};
> +
> +&main_i2c1 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	gt928: touchscreen@14 {
> +		status = "okay";

Status is okay by default.

> +		compatible = "goodix,gt928";
> +		reg = <0x14>;
> +
> +		interrupt-parent = <&pca9554>;
> +		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
> +		touchscreen-size-x = <1280>;
> +		touchscreen-size-y = <800>;
> +
> +		reset-gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
> +		irq-gpios = <&pca9554 3 GPIO_ACTIVE_HIGH>;
> +	};
> +};
> -- 
> 2.39.1
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D